Audited Supplier
ZHONGHENG-04
Vibrating Conveyor
Belt Conveyor
Polyurethane
Oil Resistant
ISO9001:2008
Energy Saving
12 Months
Customized
Customized
New
Yes
1 Piece
Free Sample
Within 7 Days
by Sea or by Air
OEM
by Carton or Pallet
OEM
China
Product Description
Characteristics of polyurethane scraper:
1. Polyurethane scraper is made of polyurethane material, which has both the high strength of plastic and the high elasticity of rubber.
2. Polyurethane scraper has ultra-high wear resistance, which is more than 5 times that of general rubber and plastic products.
3. Polyurethane scraper hardness range is wide, 60A-95A hardness range.
4. Polyurethane scraper is resistant to oil and solvent, suitable for cleaning all kinds of materials.
5. Polyurethane scraper has high toughness, clean scraping and does not damage the belt.
6. Polyurethane scraper has the property of automatically compensating for wear, and the blade head of the front end is still acute Angle after wear, so it can be used after adjusting the position of the fixing device.
4. Polyurethane scraper is resistant to oil and solvent, suitable for cleaning all kinds of materials.
5. Polyurethane scraper has high toughness, clean scraping and does not damage the belt.
6. Polyurethane scraper has the property of automatically compensating for wear, and the blade head of the front end is still acute Angle after wear, so it can be used after adjusting the position of the fixing device.
7. Polyurethane scraper has good straightness, no material leakage, and the unique curved surface design can smoothly make the logistics slide, and it is not sticky.
8. Tonda polyurethane scraper special antistatic flame retardant performance, no accident hidden danger, safe use.
9. Polyurethane scraper is simple to install and easy to replace.
9. Polyurethane scraper is simple to install and easy to replace.
Polyurethane product parameters:
| Hardness (HRA) | 75-85 |
| Tensile strength (N/MM2) 40-45 | 40-45 |
| Tear strength (kg/m) 50-55 | 50-55 |
| Elongation (%) | 400-500 |
| Roller wear(cm3) | 0.02-0.03 |
Primary Belt Scrapers
Primary Cleaners are mounted on the head pulley, bellow the material flow, and typically clean up to 80% percent of the initial
carryback. The blade is always narrower than the belt width.
Primary Cleaners are mounted on the head pulley, bellow the material flow, and typically clean up to 80% percent of the initial
carryback. The blade is always narrower than the belt width.
Secondary Belt Scraper
Secondary cleaners, located slightly farther down the line, provide additional cleaning. They are typically mounted just past where the belt leaves the head pulley and anywhere down the beltline. They remove sticky fines - the final cleaning job - with cleaning efficiencies up to 90% or more. The blade width is always the belt width or wider.
Secondary cleaners, located slightly farther down the line, provide additional cleaning. They are typically mounted just past where the belt leaves the head pulley and anywhere down the beltline. They remove sticky fines - the final cleaning job - with cleaning efficiencies up to 90% or more. The blade width is always the belt width or wider.
Reversing V-Plow Belt Cleaner
The Plow Belt Cleaner is designed for the toughest mining environments. They reduce build-up on the tail and take-up pulleys to
improve belt alignment problems and thus reduce belt edge damage within the conveyor system.
The Plow Belt Cleaner is designed for the toughest mining environments. They reduce build-up on the tail and take-up pulleys to
improve belt alignment problems and thus reduce belt edge damage within the conveyor system.
Highly abrasion- resistant polyurethane blades and rigid, torsion-free steel construction, quick mounting, prevent damage to the conveyor belt.
Features :
1. Installation position: head pulley or discharge pulley
2. High wear resistant polyurethane blade does not damage conveyor belt.
3. Urethane blade is compatible with belt joint, even mechanical joint, such as belt fastener.
4. Both single polyurethane blade and segmented uretrhane blade are available.
Self-adjusting spring tensioners make sure consistent pressure and effective cleaning. When the blade wears or the belt jumps,the scraper will follow up automatically to ensure good contact.
Wide Of Application
Belt Cleaner
Belt Cleaners are engineered to clean bulk material from conveyor belts thoroughly and can accommodate belt widths up to 120inches (3,000 mm) with belt speeds up to 2,000 fpm (10 m/s). We provide primary and secondary heavy duty mine and light industrial conveyor belt cleaner system.
1. Are you a manufacture ?
Yes. We are specialized factory of polyurethane products in China, include polyurethane screen mesh and polyurethane acccessories . We will fully guarantee your product quality, 2. Do you provide OEM/ODM?
3. How can you guarantee the quality?
4. What is your MOQ ?
1 piece is available with customized. Please feel free to contact with us.5. What is the payment ?
The payment term can be T/T, L/C, D/P or Western Union.6. Can you make other polyurethane accessories?Yes, we can products pu accessories. Such as polyurethane scrap, polyurethane bolts, polyurethane wheels, polyurethane sheets, and so on. As long as supply your design, we can produce it for you.
