Audited Supplier
MF-1010,MF-1020,MF-1025,MF-1030,MF-1040,MF-4060
by Free
Two Years Ago
Brake Lining
Non-Asbestos
Front
ISO9001
Disc
Brake Shoe
South America, North America, Eastern Europe, Mild East, Southeast Asia, Africa, Western Europe, Eastern Asia
1.0-3.5mm
4.0-9.0um
D50
6-7mohs
0.27-0.38G/M3
<1.0
10
3-8um
>1550temperature
<0.4, (800/H)
0
<4
0.4
Deyoute
PP and PE Bag on Pallets
MF-1010,MF-1020,MF-1025,MF-1035,MF-1040,MF-4060
Hebei, China
6806109090
Product Description
Mineral Fiber :
COMMON NAME: High Aluminum and low Silicon Engineering Mineral Fiber
CHEMICAL NAME: Synthetic Vitreous (silicon acid Salt) Fiber
CAS-No.: RN 287922-11-6
The fiber is made of basalt and blast furnace slag, low cost, stable friction is a good substitute for asbestos fiber. Our factory introduce advanced technology from Germany and specialized automatic production line of fiber products. Our products have good dispersion, suitable for all kinds of mixing machine mixing, made of brake pads grinding surface without fiber particles, uniform appearance. In the production process is equipped with special equipment to separate slag ball, slag ball content is low, brake noise is small after made into brake disc.
Product Model:MF-1010,MF-1020,MF-1025,MF-1035,MF-1040
Chemical Composition:
Characteristics and Applications:
Good decentrality, used well in brake linings, and it is suitable for all types of tempering mixer.
Recommendatory dosage:Brake drum:15-35%Brake disc:8-25%
Technical Indicators:
Mineral Fiber(MF-1010)
Mineral fiber(MF-1020)
Mineral fiber(MF-1025)
Mineral fiber(MF-1035)
Composite Fiber:
Non-Asbestos Composite Mineral Synthetic Fibre(Composite Fiber)
Product Model: CF-1035,CF-1025
The fiber is made of mineral fiber, organic fiber and surface treatment agent. Length 1.0-3.5mm, the fiber has good dispersion, suitable for mixing with all kinds of mixer. Using this product cold type effect is good, especially suitable for cold type two step brake lining production process, use this product do not need to add organic fiber.
Technical Indicators:
Ceramic fiber(CF-1010 ,CF-1025,CF-1035)
Aluminum silicate fiber, raw materials to kaolin, coke gem, pyrophyllite and other high aluminum content of silicate ore as raw materials, silicon dioxide and alumina content is more than 96%.
Chemical composition :
Characteristics and applications:
It has low heat conductivity, thermal stability, chemical stability, and no causticity. Brake linings made from ceramic fiber have high temperature resistance and decentrality, can be used in brake linings which requires high temperature resistance and heat recovery capacity, it also can be used in all types if mixer
Recommendatory dosage:
Brake drum: 20-35%
Brake disc: 10-25%
Technology Indicators:
Package:
25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
Storage:
Mineral Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.
Industrial Safety and Environment Protection:
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
COMMON NAME: High Aluminum and low Silicon Engineering Mineral Fiber
CHEMICAL NAME: Synthetic Vitreous (silicon acid Salt) Fiber
CAS-No.: RN 287922-11-6
The fiber is made of basalt and blast furnace slag, low cost, stable friction is a good substitute for asbestos fiber. Our factory introduce advanced technology from Germany and specialized automatic production line of fiber products. Our products have good dispersion, suitable for all kinds of mixing machine mixing, made of brake pads grinding surface without fiber particles, uniform appearance. In the production process is equipped with special equipment to separate slag ball, slag ball content is low, brake noise is small after made into brake disc.
Product Model:MF-1010,MF-1020,MF-1025,MF-1035,MF-1040
Chemical Composition:
| SiO2 | Al2O3 | Fe2O3 | CaO+MgO | Na2O+K2O |
| 40%-60% | 15%-25% | 3%-7% | 25%-30% | 3%-6% |
Good decentrality, used well in brake linings, and it is suitable for all types of tempering mixer.
Recommendatory dosage:Brake drum:15-35%Brake disc:8-25%
Technical Indicators:
Mineral Fiber(MF-1010)
| Project | Index(%) |
| The average fiber length | 0-1.0mm |
| The average fiber diameter | 4.0-9.0um |
| Fiber distribution | D50 |
| Hardness | 6-7Mohs |
| Fiber density | 0.37-0.45g/m3 |
| Fiber moisture | ≤1.0 |
| Fiber diameter | 3-8um |
| Fiber loss-on-ignition | <0.5 ,(800/H) |
| Softening Point | >1550Temperature |
| PH | 10 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <4 |
| Acetone Extraction | 0.4 |
Mineral fiber(MF-1020)
| Project | Index(%) |
| The average fiber length | 1.0-2.0mm |
| The average fiber diameter | 4.0-9.0um |
| Fiber distribution | D50 |
| Hardness | 6-7Mohs |
| Fiber density | 0.27-0.38g/m3 |
| Fiber moisture | ≤1.0 |
| Fiber diameter | 3-8um |
| Fiber loss-on-ignition | <0.4 ,(800/H) |
| Softening Point | >1550Temperature |
| PH | 10 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <4 |
| Acetone Extraction | 0.4 |
| Project | Index(%) |
| The average fiber length | 1.0-2.5mm |
| The average fiber diameter | 4.0-9.0um |
| Fiber distribution | D50 |
| Hardness | 6-7Mohs |
| Fiber density | 0.28-0.35g/m3 |
| Fiber moisture | ≤1.0 |
| Fiber diameter | 3-8um |
| Fiber loss-on-ignition | <0.4 ,(800/H) |
| Softening Point | >1550Temperature |
| PH | 10 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <4 |
| Acetone Extraction | 0.4 |
Mineral fiber(MF-1035)
| Project | Index(%) |
| The average fiber length | 1.0-3.5mm |
| The average fiber diameter | 4.5-9.0um |
| Fiber distribution | D50 |
| Hardness | 6-7Mohs |
| Fiber density | 0.25-0.35g/m3 |
| Fiber moisture | ≤1.0 |
| Fiber diameter | 3-8um |
| Fiber loss-on-ignition | <0.4 ,(800/H) |
| Softening Point | >1550Temperature |
| PH | 10 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <4 |
| Acetone Extraction | 0.4 |
Composite Fiber:
Non-Asbestos Composite Mineral Synthetic Fibre(Composite Fiber)
Product Model: CF-1035,CF-1025
The fiber is made of mineral fiber, organic fiber and surface treatment agent. Length 1.0-3.5mm, the fiber has good dispersion, suitable for mixing with all kinds of mixer. Using this product cold type effect is good, especially suitable for cold type two step brake lining production process, use this product do not need to add organic fiber.
Technical Indicators:
| Project | Indicators |
| Specific Gravity | 2.25g/cm³ |
| Fiber length | 1.0-3.5mm |
| Loose density | 800-1100 cm³/100g |
| 105ºC Volatiles | <2.5% |
| Slag ball Content | >120mesh; < 2% |
| 800ºC Burn loss | 28-32% |
| Fiber diameter | 3-8μm |
| P H | 8-10 |
| Main ingredients | Mineral Fiber 70% Cellulose Fiber 30% |
Aluminum silicate fiber, raw materials to kaolin, coke gem, pyrophyllite and other high aluminum content of silicate ore as raw materials, silicon dioxide and alumina content is more than 96%.
Chemical composition :
| SiO2 | Al2O3 | Fe2O3 | Na2O+K2O |
| 45%-55% | 40-50% | 0.8%-1.0% | 0.2%-0.5% |
It has low heat conductivity, thermal stability, chemical stability, and no causticity. Brake linings made from ceramic fiber have high temperature resistance and decentrality, can be used in brake linings which requires high temperature resistance and heat recovery capacity, it also can be used in all types if mixer
Recommendatory dosage:
Brake drum: 20-35%
Brake disc: 10-25%
Technology Indicators:
| Project | Index(%) |
| The average fiber length | 0.15--2.5mm |
| The average fiber diameter | 4-9um |
| Fiber distribution | D50 |
| Specific Gravity | 0.25-0.45g/m3 |
| Fiber moisture | ≤1.0 |
| Fiber diameter | 2-4um |
| Fiber loss-on-ignition | <0.5,(800/H) |
| Softening Point | >1750Temperature |
| PH | 7 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <20 |
| Surface density(state of compression) | 0.13-0.20g/ cm³ |
25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
Cellulose Fiber(CMF-1040)
It is made of high quality newsprint crushed, with moderate price and no environmental pollution. It is a high quality asbestos substitute, suitable for non-asbestos friction materials, especially for ceramic fiber and other mineral fiber reinforced friction materials.
Main components: Nature Cellulose
Characteristics and application:Easily dispersed, no need pre-open-processing, good cold-enhancing effect and high intensity, it can improve the intensity of the brake linings and used better than other products.
Recommendatory dosage: Brake drum: 5-20% ,Brake disc: 3-10%
Technology Indicators:
Package:
10-12kg/bag packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
It is made of high quality newsprint crushed, with moderate price and no environmental pollution. It is a high quality asbestos substitute, suitable for non-asbestos friction materials, especially for ceramic fiber and other mineral fiber reinforced friction materials.
Main components: Nature Cellulose
Characteristics and application:Easily dispersed, no need pre-open-processing, good cold-enhancing effect and high intensity, it can improve the intensity of the brake linings and used better than other products.
Recommendatory dosage: Brake drum: 5-20% ,Brake disc: 3-10%
Technology Indicators:
| Project | Indicators |
| Appearance | Gary White |
| Specific Gravity | 1.4g/ cm³ |
| Loose Density | 600-800 cm³/100g |
| Fiber length | 0.65-1.8mm |
| Surface density(state of compression) | 0.16-0.19g/ cm³ |
| 105ºC Volatiles | <10.9% |
| 800ºC Calcination | <0.9% |
| Fiber diameter | 3-12μm |
| P H | 5.1 |
| Main ingredients | H 7% C 41% O 52% |
10-12kg/bag packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
Storage:
Mineral Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.
Industrial Safety and Environment Protection:
- Risk of explosion by static sparks or ignition sources
- Use only explosion -proof equipment .
- Use with local exhaust ventilation.
- Wear protective eyeglasses or chemical safety goggles .
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
