Audited Supplier
CF-1010, CF-1020, CF-1025, CF-1035
Iron Voltage Electric Material, Thermal Insulation Coatings, Friction Material, Packing Material, Filter Material, High Temperature Insulating Material
1900℃, 1600℃, 1500℃
SiO2, Al2O3.SiO2, Al2O3
Particles
Chop
High Ahlmirla Fibre
0.15--2.5mm
4-9um
White or Greyish White
>1750temperature
7
<20
2-4um
0.25-0.45G/M3
<0.1
Deyoute
PP and Paper Bags on Pallets
CF-1010, CF-1020, CF-1025, CF-1035
Hebei, China
680690000
Product Description
Ceramic fiber(CF-1010 ,CF-1020,CF-1025,CF-1035)
Aluminum silicate fiber, raw materials to kaolin, coke gem, pyrophyllite and other high aluminum content of silicate ore as raw materials, silicon dioxide and alumina content is more than 96%.
Chemical composition :
| SiO2 | Al2O3 | Fe2O3 | Na2O+K2O |
| 45%-55% | 40-50% | 0.8%-1.0% | 0.2%-0.5% |
It has low heat conductivity, thermal stability, chemical stability, and no causticity. Brake linings made from ceramic fiber have high temperature resistance and decentrality, can be used in brake linings which requires high temperature resistance and heat recovery capacity, it also can be used in all types if mixer
Recommendatory dosage:
Brake drum: 20-35%
Brake disc: 10-25%
Technology Indicators:
CERAMIC FIBER(CF-1025):
| Project | Index(%) |
| The average fiber length | 0.15--2.5mm |
| The average fiber diameter | 4-9um |
| Fiber distribution | D50 |
| Specific Gravity | 0.25-0.45g/m3 |
| Fiber moisture | ≤1.0 |
| Fiber diameter | 2-4um |
| Fiber loss-on-ignition | <0.5,(800/H) |
| Softening Point | >1750Temperature |
| PH | 7 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <20 |
| Surface density(state of compression) | 0.13-0.20g/ cm³ |
| Project | Index(%) |
| The average fiber length | 0--1mm |
| The average fiber diameter | 4-9um |
| Fiber distribution | D50 |
| Specific Gravity | 0.45-0.55g/m3 |
| Fiber moisture | ≤1.5 |
| Fiber diameter | 2-4um |
| Fiber loss-on-ignition | <0.5,(800/H) |
| Softening Point | >1750Temperature |
| PH | 7 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <30 |
| Surface density(state of compression) | 0.25-0.40g/ cm³ |
| Project | Index(%) |
| The average fiber length | 0.10--2.0mm |
| The average fiber diameter | 4-9um |
| Fiber distribution | D50 |
| Specific Gravity | 0.25-0.35g/m3 |
| Fiber moisture | ≤1.0 |
| Fiber diameter | 2-4um |
| Fiber loss-on-ignition | <0.5,(800/H) |
| Softening Point | >1750Temperature |
| PH | 7 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <25 |
| Surface density(state of compression) | 0.25-0.35g/ cm³ |
Package:
25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
Storage:
Ceramic Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.
Industrial Safety and Environment Protection:
- Risk of explosion by static sparks or ignition sources
- Use only explosion -proof equipment .
- Use with local exhaust ventilation.
- Wear protective eyeglasses or chemical safety goggles .
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
Composite fibre:
Non-Asbestos Composite Mineral Synthetic Fibre(Composite Fiber)
Product Model: CF-1035,CF-1025
The fiber is made of mineral fiber, organic fiber and surface treatment agent. Length 1.0-3.5mm, the fiber has good dispersion, suitable for mixing with all kinds of mixer. Using this product cold type effect is good, especially suitable for cold type two step brake lining production process, use this product do not need to add organic fiber.
Technical Indicators:
| Project | Indicators |
| Specific Gravity | 2.25g/cm³ |
| Fiber length | 1.0-3.5mm |
| Loose density | 800-1100 cm³/100g |
| 105ºC Volatiles | <2.5% |
| Slag ball Content | >120mesh; < 2% |
| 800ºC Burn loss | 28-32% |
| Fiber diameter | 3-8μm |
| P H | 8-10 |
| Main ingredients | Mineral Fiber 70% Cellulose Fiber 30% |
25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
Storage:
Mineral Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.
Industrial Safety and Environment Protection:
- Risk of explosion by static sparks or ignition sources
- Use only explosion -proof equipment .
- Use with local exhaust ventilation.
- Wear protective eyeglasses or chemical safety goggles .
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
