Audited Supplier
QD
one year
one year
CE, ISO9001
New
Air Operation+Ground Operation
Double Girder
Beam
Customer Needs
Electric Winch
Local Actual Condition
Ocean Shipping/Air Transoprt/Express Delievery
HuaSui
Standard Export
16t
Henan, China
8426112000
Product Description
Product descriptions from the supplier
Overview
QD model overhead crane with hook is mainly used in inside workshop. it is divided into two workingclasses: A5 and A6 according to the use grade and load-up condition.
There are three kinds of method for entering the platform of cab from the side, from the end and from thetop.
The cab can be either fixed at the left end or at the right end.
Safe slide wire or angle iron can be used for electric conduction of the crane; it can be either at the oppo.
* Capacity: 5-800/150ton
* Span length: 10.5-31.5m
* Lifting height: 3-50m
* Work duty: A5, A6
* Rated voltage: 220V~690V, 50-60Hz, 3ph AC
* Work environment temperature: -25ºC~+50ºC, relative humidity ≤85%
* Crane control mode: Floor control / Remote control / Cabin room
* Span length: 10.5-31.5m
* Lifting height: 3-50m
* Work duty: A5, A6
* Rated voltage: 220V~690V, 50-60Hz, 3ph AC
* Work environment temperature: -25ºC~+50ºC, relative humidity ≤85%
* Crane control mode: Floor control / Remote control / Cabin room
| Lifting Weight | 1 | 32/5 | 50 / 10 | ||||||||||||||||
| span | 10.5 | 13.5 | 16.5 | 19.5 | 22.5 | 25.5 | 28.5 | 31.5 | 10.5 | 13.5 | 16.5 | 19.5 | 22.5 | 25.5 | 28.5 | 31.5 | |||
| Max Lifting Height | Main | m | 16 | 12 | |||||||||||||||
| Aux | 18 | 16 | |||||||||||||||||
| Speed | lift | Main | m/min | A3 | A3 | ||||||||||||||
| 2.03 | 1.62 | ||||||||||||||||||
| Aux | 9.28 | 6.3 | |||||||||||||||||
| Travelling of crab | 19 | 18.24 | |||||||||||||||||
| Travelling of trolley | 40.8 | 47.7 | 47.7 | 48.1 | |||||||||||||||
| Motor | lift | Main | KW | YZR16OL-6/13 | YZR200L-8 / 18.5 | ||||||||||||||
| Aux | YZR160L-8/9 | YZR180L-8 / 13 | |||||||||||||||||
| Travelling of crab | YZR132M,-6/ 2.5 | YZR132M2-6 / 4 | |||||||||||||||||
| Travelling of trolley | YZR132M-6/4×2 | YZR160M-6/6.3×2 | YZR16OM,-6/6.3×2 | YZR160M2-6/ 8.5× 2 | |||||||||||||||
| (mm)Main Size | B | 4650 | 4700 | 5000 | 4800 | 5000 | |||||||||||||
| Bo | 6474 | 6620 | 6924 | 6724 | 6824 | 7144 | |||||||||||||
| b | 260 | 300 | |||||||||||||||||
| S1 | 1070 | 1005 | |||||||||||||||||
| S2 | 2050 | 2200 | |||||||||||||||||
| Ss | 1700 | 2000 | |||||||||||||||||
| SA | 2680 | 3195 | |||||||||||||||||
| b | 260 | 300 | 300 | ||||||||||||||||
| H2 | 90 | 94 | 244 | 264 | 414 | 564 | 714 | 814 | -79 | 96 | 102 | 252 | 402 | 552 | 702 | 802 | |||
| H | 2437 | 2439 | 2475 | 2726 | 2732 | ||||||||||||||
| Hg | 2520 | 2524 | 2614 | 2644 | 2794 | 2944 | 3094 | 3194 | 2531 | 2526 | 2532 | 2632 | 2782 | 2932 | 3082 | 3182 | |||
| H, | 880 | 1010 | 1030 | ||||||||||||||||
| H | 705 | 701 | 571 | 1020 | 1014 | ||||||||||||||
| Hs | 790 | 948 | |||||||||||||||||
| Weight | crab | 10.0 | 14.5 | ||||||||||||||||
| Total weight | Open | 24.9 | 27.7 | 30.7 | 35.3 | 38.7 | 43.7 | 47.4 | 51.4 | 33.9 | 37.0 | 41.3 | 45.3 | 49.3 | 54.8 | 58.8 | 64.1 | ||
| Close | 25.3 | 28.1 | 31.1 | 35.7 | 39.1 | 44.1 | 47.8 | 51.8 | 34.2 | 37.4 | 41.6 | 45.7 | 49.7 | 55.2 | 59.2 | 64.5 | |||
| Max.wheel pressure | KN | 244 | 260 | 274 | 297 | 309 | 32 | 340 | 350 | 373 | 396 | 417 | 432 | 453 | 471 | 484 | 500 | ||
| Steel track recommended | QU7090 | QU80100 | |||||||||||||||||
| Power source | 3-Phase A.C.50Hz 380V | ||||||||||||||||||
The Main Girder
The main girder is a box-shaped structure on the track. The section of the main girder is systematically analyzed and calculated using ANSYS finite element calculation method to ensure that it has sufficient strength, rigidity and overall stability.
End Carriages
The end carriages are the box-shaped structure, and the connection between the end carriages and the main girders is the rigid connection. In order to facilitate transportation, the end carriages are disconnected and connected by high-strength bolts.
Huasui has 15 years of experience in crane and hoist design and manufacturing, 3 production factories covering an area of 168000 square meters, 10 production lines with annual production capacity 500 sets. It has more than 800 employees, including more than 20 technicians and more than 10% senior engineers. The factories have modern crane manufacturing and assembly equipment, and introduces European advanced management, process flow and quality control system to ensure safe, reliable and high quality cranes for customers, making customers' logistics operations easier and creating long-term value for customers.
FAQ
B: Yes! We can customize all kinds of cranes according to your requirements. You just need to tell us your demands.
A:Which industries do you service?
A:Which industries do you service?
B: We service many industries including machinery, metallurgy, railway and so on. High quality products in different fields will play an important role.
A:Which areas do you service?
A:Which areas do you service?
B: We have a huge market both at home and abroad. We have exported our cranes to many countries, especially European, Africa and so on.
A: How do you guarantee the quality?
B: We will constantly check the quality during the manufacturing process, and strictly test the equipment before shipment, and we will also send you a quality certificate.
B: We will constantly check the quality during the manufacturing process, and strictly test the equipment before shipment, and we will also send you a quality certificate.
A:What are the main products?
B: Our main products are overhead and gantry cranes. Different products have different models and application scenarios.
A:What international certifications has your company passed?
B: Our main products are overhead and gantry cranes. Different products have different models and application scenarios.
A:What international certifications has your company passed?
B: Our cranes has passed CE, lSO, GOST, SGS, TUV, BV, and so on.
