Audited Supplier
Chicken Manure Drying Organic Fertilizer Machine, also known as paddle agitated rotary drum dryer, rake roller dryer, rotary rake drum dryer, and rotary paddle drum dryer. The machine has kept the ordinary drum advantages of the dryer, it is custom designed suit to the disadvantage of the moisture is more than 50% weak stick, sticking material drying, and the drum centre "black hole" phenomenon leading to the unit area evaporation capacity is inefficiency and high fuel consumption etc. Increasing the high-speed rotation of the blade, strengthen the material grinding and decentralized function, and filling the drum centre "black hole". The material surface area fully expanded, to maximize heat transfer between the material and drying air. Because of the material particles to minimize and the heat transfer evaporation rate greatly improved. After a large area of production practice proved that chicken manure dryer compares with ordinary drum dryer. The unit area of water evaporation capacity of 25-30kg water / m2 • h, which is 1-2 times the ordinary drum dryer. The output of same size drying Machine increased by 50% or more, and fuel energy consumption reduced by more than 30%. equipment spatial footprint is smaller than 40%. The material moisture content dry more uniform, and more than 40% efficiency.
Chicken Manure Drying Granulation Equipment Line is suitable for chicken manure, cow dung, feces organic fertilizer, sludge, bean dregs, starch residue, sauce residue, sprayed corn kernels, cassava residue, beer distiller's grains, lees, straw, pasture and other 50-85% moisture content of material Drying. All of our drying process technology according to the characteristics of each biomass material, the size of production, the application requirements, the cost control, the degree of automation, the site conditions etc.
Material Flow : 75-85% moisture content of the material fed into the special dehydration machine, the water removed to about 65% through the screw conveyor into the mixing drum dryer to downstream drying. Flights pick up material, carry it over, and shower it through the air stream as the drum rotates, promoting maximize efficiency of heat transfer between the material and drying air. The rapid evaporation of water vaporization, to achieve the effect of drying materials in the hot air under the rapid flow of the drum. The rotary drum dryer gives material a chance to dry before it hits the next flights, in order to prevent buildup near the wet material discharge. Drum cleaning device is installed inside of the drum to prevent the material sticking issue.
Air Stream Flow :The air through the air blower increase pressure into the hot air furnace to heating, when the temperature reached to 600-850, the hot air will be into dryer to drying wet material and evaporation water by induce draft fan. Through three-layer heat transfer, the air temperature reduces to 55-65 and then discharge from dryer. The dust and moisture are purified trough the cyclone dust collector and wet dust collector.
1. Fermentation process: The first procedure of the production line is organic matter fermentation. During the preparation stage, the compost will be transported to the mixer to be turned over and mixed in order to speed up the fermentation speed.
2. Crushing process: During this process, Crushing the compost block by the crusher. It is ready for the pelleting process. If the result of compost fermentation is good and without lumps, this step can be omitted.
3. Quantitative composition process: If you need to add many kinds of material in the recipe. In order to improve the processing efficiency and the accuracy of the proportion of the ingredients. You can use the automatic batching system. The system contains a number of quantitative belt scales. But if the production is pure organic fertilizer. This step can be omitted.
4. Pelleting process: Disc pellet machine (rotary pellet mill) is widely used in fertilizer granulation. As the main step of the production line. Our equipment can automatically produce the shape of the pellets that suit our customers. After the granulation of fertilizer. It can delay the release of fertility, greatly slowing the number of artificial fertilization.
5. Drying process: In order to reshape the pellet shape and better storage. The humidity of the fertilizer should no more than 14%. Drum rotary dryer is widely used for drying fertilizer pellets.
6. Cooling process: In order to increase the hardness of fertilizer pellets. Then we need to cool the fertilizer pellets after drying it. A roller cooling machine can meet this demand.
7. Screening process: Through the trommel screen to select moderate size pellets. The small and large size of fertilizer pellets will be re-crushed and re-grinder.
8. Coating process: The roller coating machine to carry on the coating to the fertilizer granule. In order to prevent the particle adhesion
9. Packing process: Packing process as the final process of the whole plant, generally using the automatic packing machine, Packing the fertilizer pellets into bags for sale.
10. Dust removal system: The dust generated from all process will be collected.
11. Supporting facilities: Supporting facilities is connecting to the belt conveyor, bucket elevator.
1) Chicken Manure Drying Granulation Equipment Line can realize automatic and intelligent control, the operation parameters can be automatically controlled, the dryer is always in the best condition to run, it can ensure uniform drying out of the raw material moisture is stability.
2) The inside of the Manure rotary dryer has unique flights to hit and tumble the materials. In order to maximize the efficiency of heat transfer between the material and drying air. The output of equipment increases more than 50% and the fuel energy consumption decreases by more than 30%.
3) This machine uses a four-wheel drive assembly. The driving is more stable and reliable.
4) The spatial footprint of a general rotary drum dryer is less footprint about 40%. The civil investment was reduced by about 40%. The equipment cost decreased by about 20%.
5) The internal structure of the dryer uses various efficient flight patterns. It can efficiently adjust the feed and heat distribution. The high heat efficiency, waste are exhausted temperature is lower than 50.
6) Adopts frequency motor control the material flow, heat supply, and drum rotation speed. It can easily adjust according to the needs of the outlet material moisture content and equipment output.
7) This type of dryer uses the modular dust collector purifying and heat recycling assembly. It is safe and protects the environment.
8) The Manure dryer is several options for new types of energy-saving hot air furnaces, high efficiency and energy saving, heating can be controlled, simple operation, energy consumption decreases about 30%, power consumption reduces 20%, and lower operation costs.
Other Related Technical Parameters
We can help optimize the drying process according to the property of different materials, production scale, application requirements, cost control, automation level and site condition.
| Model(DLJG) | 1208 | 1408 | 1610 | 2010 | 2010/3 | 2210/3 | 2510/3 | 2512/3 |
| Input Capacity(t/h) | 1.82 | 2.18 | 3.15 | 3.81 | 4.76 | 5.51 | 6.33 | 7.6 |
| Output Capacity(t/h) | 1.07 | 1.28 | 1.85 | 2.24 | 2.8 | 3.24 | 3.72 | 4.47 |
| Vaporization(t/h) | 0.75 | 0.9 | 1.3 | 1.57 | 1.96 | 2.27 | 2.61 | 3.13 |
| Early Moisture(%) | 50±5% | |||||||
| Final Moisture(%) | 15%(adjustable) | |||||||
| Drying Temperature(°C) | 350±30 | |||||||
| Total Power(KW) | 32 | 40 | 55 | 95 | 95 | 100 | 125 | 145 |
| Total Weight(T) | 15 | 17 | 21.5 | 26.5 | 26.5 | 28.5 | 37 | 41 |
| Plant Area(M) | 5*15 | 5*15 | 6*16 | 8*18 | 8*20 | 8*20 | 10*20 | 10*22 |
| Except above models, we also can supply special model according to your requirements. | ||||||||
Note: The price above is just for reference, please feel free to contact us if you want to know more about different models or production lines. We can offer free customized proposals.
Below is Dingli Group Packaging & Shipping:
Your device will be packed well in container and suit for long ocean shipping.
Below is Dingli Group Service Items:
Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized solution and manufacture customized products for you.
3. Welcome your visit.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.
Dingli Group Advantage:
1. Over 200 employees, 98% professional technical personnel;
2. Factory size over 15,000 square meters;
3. 480 Inventions & Patents
4. Exported over 80 countries,300 global partners;
5. Rank 3rd in China Drying Industry;
6. Customize Drying Production Line.
Below are Dingli Dryer Factory & Sales Team & Production Workshop Pictures:
Below are Dingli Group Honors & Certificates & Patents:
Below are Dingli Customers Visiting:
Dingli Dryer Production Line has exported to over 80 countries with 300 foreign partners, such as Germany, Britain, United States, Italy, Israel, Chile, Thailand, Russia, Vietnam, India, Cambodia, Indonesia, Malaysia, Thailand etc.
Below are Installation Sites of Our Customers:
After reach deals, Dingli Engineer will fly to your address, install and adjust machine for you freely.
Also train you operation skills, until you are satisfied.
