7/8EIA-J7/8A
Generally Coaxial Connector
Clamping Type
Microwave, RF
Male Connector
Eia
Straight
≤1.07@DC-1000MHz, ≤1.25@DC-2500MHz
6000V
DC-5GHz
50ohm
Nickel and Silver
PTFE
Brass
7/8″ Eia Flange
≤2100V RMS,50Hz,at Sea Level
Carton
Material: Brass
Zhenjiang, China
8536909000
Product Description
7/8" EIA Flange Connector For 7/8" Foam Feeder Cable
(Contact attachment:Inner:captivated;Outer:clamp)






Audited Supplier By SGS:

(Contact attachment:Inner:captivated;Outer:clamp)
Model No. | 7/8EIA-J7/8A | |
Interface | 7/8″ EIA Flange | |
Electrical | ||
Characteristic Impedance | 50ohm | |
Frequency Range | DC-5GHz | |
VSWR | ≤1.07@DC-1000MHz, ≤1.25@DC-2500MHz, | |
Dielectric Withstanding Voltage | ≥6000V RMS,50Hz,at sea level | |
Working Voltage | ≤2100V RMS,50Hz,at sea level | |
Dielectric Resistance | ≥5000MΩ | |
Average Power | 2.3KW @900MHz | |
Peak Power Maximum | 90KW | |
Contact Resistance | Center Contact ≤1.5mΩ | Outer Contact ≤1.5 mΩ |
Mechanical | ||
Durability | Mating cycles ≥100 | |
Material and Plating | ||
Parts Name | Material | Plating |
Body | Brass | Ni |
Insulator | PTFE | - |
Center conductor | Phosphor Bronze | Ag |
Coupling flange | Brass | Ni |
Back nut | Brass | Ni |
Gasket (O-ring) | Silicone Rubber | - |
Cable Clamp | Brass | Ni |
Hardware kits | Stainless Steel | - |
Environmental | ||
Operating Temperature | -40ºC~+85ºC | |
Weatherproof Rate | IP67 | |
RoHs Compliant | Yes | |
Suitable Cable | Andrew LDF5-50,AL5-50,RFS LCF78-50;Leoni 7/8"R,Hansen 7/8",Eupen EC5-50 | |
Notes | It includes one coupling element(bullet). Hardware kits include:3 pieces of each bolt, nut, lock washer and flat washer. |






Audited Supplier By SGS:
