Audited Supplier
50ton
24 Hours on Line
After Shipping 14 Month
New
Customized
380V
CIP Cleaning Machine
Natural Ingredients
Frozen and Chilled
stonepackage
Standard Export Package
50 ton
China. Zhang Jia Gang
8401409020
Product Description
CIP system is to clean the place that has contact with the material. The cleaning area includes inside surface of the tank, pipe and material tank and other places that the material passes.
CIP system is composed of detergent storage tank, acid and alkali supply device, heating device, process pump, reflux pump, pipes, steam valves and so on.
The main parameters of CIP system is the detergent's categories, viscosity, temperature and velocity of flow. The alkali is usually of NaOH, acid is usually of nitric acid or phosphoric acid, the viscosity is 1-3%. After heating, the velocity of flow is 1.5-3m/s.
There are usually 3 detergent storage tanks: Acid tank, alkali tank and hot water tank. According to the cleaning aim, the tanks could be classified as single circuit, two-circuit, multi loop, etc, .
The automatic CIP system is able to automatically take on the detergent measuring and keep the detergent in the certain temperature. The cleaning procedure is set previously, then taken on automatically
Configuration parameters of 30T/H one stage pure water equipment
| No. | Equipment name | Name, specification, material |
| 1 | Raw water booster pump | No.: BJ2037 |
| Flow :65T/H | ||
| H:150-200M | ||
| Power :11kW | ||
| Material :SUS304 | ||
| 2 | Sand filter | Type: vertical tank |
| Flow :58-65 T / H | ||
| Dia:2200mm | ||
| Filter layer height:1300mm | ||
| Working pressure ≤0.8Mpa | ||
| Material: SUS304 | ||
| Silica sand < 5MM;free send 100kg | ||
| Washing: manual flush valve | ||
| 3 | Carbon filter | Type: vertical tank |
| Flow :58-65 T/ H | ||
| Dia:2200mm | ||
| Filter layer height:1300mm | ||
| Working pressure ≤0.8Mpa | ||
| Material: SUS304 | ||
| Filter Media: coconut shell activated carbon; granularity ≈5mm;free send 100kg | ||
| Washing: manual flush valve | ||
| 4 | Sodium ion filter | Type: vertical tank |
| Flow :58-65 t / H | ||
| Dia:2200mm | ||
| Filter layer height:1300mm | ||
| Working pressure ≤0.8Mpa | ||
| Material: SUS304 | ||
| Filter Media: Sodium ions; granularity ≈5mm;free send 100kg | ||
| Washing: manual flush valve | ||
5 | Precision filter | Type: vertical tank |
| Flow :58-65 T / H | ||
| Dia:1000mm | ||
| PE folding film height:1000mm | ||
| Working pressure ≤0.8Mpa | ||
| Material: SUS304 | ||
| PE folding film aperture is 1-5 micron; Free send 10pcs | ||
| 6 | Multipolar increase pump | No.: CDLF65-70/2 |
| Flow:65 T / h | ||
| H:1400mm | ||
| Power :37kW | ||
| Material: SUS 304 | ||
| 7 | Reverse osmosis film | Productivity:30 T/ H |
| Water recovery:55% | ||
| Desalination rate:97% | ||
| Produced water conductivity:≤8μs/cm | ||
| No. :BW30-8040;US DOW | ||
| Type :Roll | ||
| Dia:200mm | ||
| L:1016mm | ||
| Material: polyamide composite membrane | ||
| Effective mode area:7.2m2 | ||
| QTY:30pcs | ||
| Water conditions: water pressure 1.6MPa, temperature 25 ºC, PH value of 3 to 11, water SDI <5, the chlorine concentration <0.1PPm; | ||
| Air pressure:SUS304; | ||
| Type :8040-6 | ||
| Whole Length:5700mm | ||
| Outer dia:1200mm | ||
| QTY:1pcs | ||
| Material :SUS304,Polished inside and outside; | ||
| Working pressure:300PSI,Pressure 2 ~ 2.5MPa | ||
| Sealed at both ends: ABS head plus silicone O-ring; quick opening clamp link | ||
| 8 | Instrumentation and Control | Basic equipment: 1. raw water pump, high pressure pump, inlet valve, flush valve control; 2. water protection, low and high pressure protection, water level control, external control mode signal; (low-pressure water treatment and water stop, high pressure and filled with water stop, water tank automatically turn off automatic tank full of water); 3. the raw water and water conductivity display; 4. Out of the water pressure is displayed after the filter before filtration pressure display, flow display |
| Conductivity meter Model CCT-3320V, 2 sets; Pure white background light LCD liquid crystal display; Range: 0 ~ 2000μS / cm; Accuracy: 1.5% (FS) Medium temperature: 5 ~ 50 ºC | ||
| Oil pressure gauge : 6pcs | ||
| Line Flow column : 2pcs | ||
| Solenoid valve 2; normally closed, flow aperture 25mm, brass | ||
| A low-voltage protection,type: P6E; | ||
| Manual control valve : 2pcs ,SUS304 | ||
| 9 | Equipment rack | Material: SUS 304 |
| 10 | Pipeline | Material: SUS 304 |
| 11 | Low-voltage electrical | Circuit breakers, AC contactors, relays, thermal overload relay |
| 12 | Voltage equipment | 380V/50Hz |
.
