Audited Supplier
CS6400D
0-500 ug/L
Deviation calibration and slope calibration
Stainless Steel 316
IP68/NEMA6P
twinno
Carton Box
Diameter 37mm* Length220mm
Shanghai, China
9027809900
Product Description
CS6400D Chlorophyll Sensor
Principle:
CS6400D Chlorophyll sensor uses the characteristic of chlorophyll A absorption and emission peaks in the spectrum to emit monochrome light of a specific wavelength into water. Chlorophyll A in water absorbs the energy of monochrome light and releases monochrome light of another wavelength. The light intensity emitted by chlorophyll A is proportional to the content of chlorophyll A in water.
Functions:
Based on the fluorescence of the pigments to measurement the target parameters , it can be identified before the impact of algal bloom.
No need for extraction or other treatment, rapid detection, to avoid the impact of shelving water samples;
Digital sensor, strong anti-interference ability, long transmission distance;
Standard digital signal output can be integrated and networked with other devices without controller.
Installation of sensors on site is convenient and fast, realizing plug and play.
Technical parameters:
| Measurement range | 0-500 ug/L |
| Measurement Accuracy | The signal level of 1ppb rhodamine WT dye is ±5% of the corresponding value |
| Pressure range | ≤0.4Mpa |
| Calibration | Deviation value calibration,slope Calibration |
| Requirements | The distribution of chlorophyll in water is very uneven, so multi-point monitoring is recommended. The turbidity of water is lower than 50NTU. |
| Main material | Body:SUS316L + PVC(fresh water),Titanium alloy(marine);O-ring:Fluorine Rubber; Cable:PVC |
| Power supply | DC:12VDC |
| Storage temperature | -15- 65ºC |
| Measuring temperature | 0- 45ºC |
| Dimension | Sensor:Dia37mm*L 220mm |
| Weight | 0.8KG |
| Protective rate | IP68/NEMA6P |
| Cable length | Standard:10m,the maximum may be extended to 100m. |
After Sales Service
* The warranty period is 12 months from commissioning acceptance date on. In addition, we supply 1 year warranty and lifelong free technical guiding and training.
* We guarantee the maintenance time no more than 7 working days and response time within 3 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.
FAQ
What is the mini order quantity?
MOQ: generally 1 unit/piece/set
What payment methods are supported?
Payment method: By T/T, L/C, etc.
Payment terms: Generally, We accept 100% T/T in advance, balance before shipment.
What are the available delivery methods?
Our port location: Shanghai
Delivering to: Worldwide
Delivering method: by sea, by air, by truck, by express, combined transportation
How long is the product date of delivery probably?
Delivery date differs with product type, order quantity, special requirement etc. Usually our big machine delivery date is around 15 ~ 30 days; test equipment or analyzer delivery date is around 3~7 days. Some products have stock, contact us anytime to get more information.
How long is the warranty period?
We warrants the plant supplied under agreed specification against defects in material and workmanship under normal use and service for a period of 1 years after start up of the system.
How is the technical services on the product?
You are welcome to contact us any time if you have any technical question. We will response promptly and answer to your satisfaction. If required and necessary, Engineer available to service and provide technical support for machinery overseas.
Delivery:
Our Company:
