Audited Supplier
RW218
≥105dB
Passive
Subwoofer Speaker
Wood
Commercial
Factory QC
AA+ Plywood
98dB
132dB
2000W AES,4000W Peak
2X18'' 460mm
VEMA
Flight Case or Carton Packing
(W)1070* (D)700* (H)600mm
China
8518220000
Product Description
Powerful RW218 sub-bass system has been designed to be used with large scale RF25 systems to extend and increase the total low frequency output power. It can also be used as the low frequency section of a bi-amped or tri-amped RF system. The RW218 provides good mid-bass punch with extended sub-bass output from two direct radiating 18″(460mm) drivers with 5″(125mm) high temperature voice coils.
| -10dB response | 30Hz-150Hz |
| SENSITIVITY | 98dB/w/m |
| Max SPL Peak | 126dB continuous,132dB SPL |
| Nominal Impedance | 4ohms |
| Rated power | 2000W AES,4000W peak |
| Number of Drivers | 2×NL4FC speakon |
| Woofer Size | 2x18″(460mm) , 8 ohms, Neodymium |
| Voice Coil Diameter | 5″(125mm) Inside/Outside epoxy baked |
| Diaphragm Material | Epoxy-reinforced cellulose |
| Magnet type | Advanced ventilated ferrite |
| Rated Continuous Power | 4000 Watts |
| Cooling | Passive-aluminum heatsink |
| Height × Width × Depth | (W)1070x(D)700x(H)600mm |
| Weight | 74kg |
