Audited Supplier
RG Series 1
Vertical Drilling Machine
Vertical
Artificial
<50mm
Semiautomatic
Precision
CE
Drilling Capacity:30-63mm
West Industry
Wooden Case
CE
China
Product Description
Product Name: Radial Drilling Machine RG Series 1
Performance:
· High capacity radial drill presses for every requirement, at a very affordable price;
· For Drilling, Reaming and Tapping for the machine;
· Machine frame made of high-quality fine-grain cast-iron with heavy ribbing to ensure maximum
reduction of vibrations;
· Precision-ground gears for quiet operation;
· Designed and accomplished referring to the international Standards(ISO);
· The spindle is made of the high-quality hardened steel for consistent accuracy;
· The spindle hears, radial arm and columns are elapsed by hand mechanisms;
· The reversing and feeding changes are wide, and the control keys are well compact, reliable and
convenient;
· Hydraulic pre-selection speed and feed change mechanisms are adopted, the spindle head, radial arm
and columns are clamped by the hydraulic clamping mechanisms, and the forward, revestop(braking),
as well as the setting of spindle in neutral position are all controlled by a single-lever;
· Widely used in every department of mechanical machining.
Standard Accessories:
· Reducing sleeve
· Grease gun
· Drift
Main Technical Data of Radial Drilling Machine:
Main Technical Data of Radial Drilling Machine:
| Model | RG25×8 | RG25×10A | RG25×13 | ||
| Max drilling diameter | mm | 25 | |||
| Distance between spindle axis and column | Max | mm | 800 | 1000 | 1300 |
| Min | 200 | ||||
| Distance between spindle end and working surface of base plate | max | mm | 1066 | ||
| min | 266 | ||||
| Taper in spindle (Morse) | Morse | No.3 | |||
| Spindel travel | mm | 250 | |||
| Number of spindel speeds | 8 | ||||
| Range of spindel speeds | r/min | 80-2000 | |||
| Number of spindle feeds | 4 | ||||
| Range of spindel feeds | mm/r | 0.13-0.54 | |||
| Power of main drive motor | kW | 1.5 | |||
| Voltage | V | 380, 440/220 | |||
| Frequency | Hz | 50, 60 | |||
| Weight | N.W. | kg | 1400 | 1400 | 1430 |
| G.W. | 1700 | 1700 | 1750 | ||
| Overall dimension (L×W×H) | CM | 174 (204)×75×236 | |||
| Dimension (L×W×H) | CM | 199×96×214 | |||
| Model | RG32×8 | RG32×10 | RG32×13 | ||
| Max drilling diameter | mm | 32 | |||
| Distance between spindle axis and column | Max | mm | 800 | 1000 | 1300 |
| Min | 200 | ||||
| Distance between spindle end and working surface of base plate | max | mm | 1064 | ||
| min | 264 | ||||
| Taper in spindle (Morse) | Morse | No.4 | |||
| Spindel travel | mm | 250 | |||
| Number of spindel speeds | 8 | ||||
| Range of spindel speeds | r/min | 71-1800 | |||
| Number of spindle feeds | 4 | ||||
| Range of spindel feeds | mm/r | 0.13-0.54 | |||
| Power of main drive motor | kW | 2.2 | |||
| Voltage | V | 380, 440/220 | |||
| Frequency | Hz | 50, 60 | |||
| Weight | N.W. | kg | 1400 | ||
| G.W. | 1700 | ||||
| Overall dimension (L×W×H) | CM | 174 (204)×75×236 | |||
| Dimension (L×W×H) | CM | 199×96×214 | |||
| Model | RG40×13 | RG40×16A | RG40×20 | ||
| Max drilling diameter | mm | 40 | |||
| Distance between spindle axis and column | Max | mm | 1300 | 1600 | 2000 |
| Min | 350 | ||||
| Distance between spindle end and working surface of base plate | max | mm | 1050 | 1250 | 1250 |
| min | 350 | ||||
| Taper in spindle (Morse) | Morse | No.4 | |||
| Spindel travel | mm | 315 | |||
| Number of spindel speeds | 16 | ||||
| Range of spindel speeds | r/min | 25-2000 | |||
| Number of spindle feeds | 16 | ||||
| Range of spindel feeds | mm/r | 0.04-3.2 | |||
| Power of main drive motor | kW | 3 | |||
| Voltage | V | 380, 440/220, 420 | |||
| Frequency | Hz | 50, 60 | |||
| Weight | N.W. | kg | 3000 | 3500 | 3800 |
| G.W. | 3300 | 3850 | 4150 | ||
| Overall dimension (L×W×H) | CM | 249×104×284 | |||
| Dimension (L×W×H) | CM | 292×123×288 | |||
| Model | RG50×13 | RG50×16 | RG50×20 | ||
| Max drilling diameter | mm | 50 | |||
| Distance between spindle axis and column | Max | mm | 1300 | 1600 | 2000 |
| Min | 350 | ||||
| Distance between spindle end and working surface of base plate | max | mm | 1050 | 1250 | 1250 |
| min | 350 | ||||
| Taper in spindle (Morse) | Morse | No.5 | |||
| Spindel travel | mm | 315 | |||
| Number of spindel speeds | 16 | ||||
| Range of spindel speeds | r/min | 25-2000 | |||
| Number of spindle feeds | 16 | ||||
| Range of spindel feeds | mm/r | 0.04-3.2 | |||
| Power of main drive motor | kW | 4 | |||
| Voltage | V | 380, 440/220, 420 | |||
| Frequency | Hz | 50, 60 | |||
| Weight | N.W. | kg | 3000 | 3500 | 3800 |
| G.W. | 3300 | 3850 | 4150 | ||
| Overall dimension (L×W×H) | CM | 249×104×284 | |||
| Dimension (L×W×H) | CM | 292×123×288 | |||
| Model | RG50L×13 | RG50L×16 | RG50L×20 | ||
| Max drilling diameter | mm | 50 | |||
| Distance between spindle axis and column | Max | mm | 1300 | 1620 | 2000 |
| Min | 400 | ||||
| Distance between spindle end and working surface of base plate | max | mm | 1370 | ||
| min | 360 | ||||
| Taper in spindle (Morse) | Morse | No.5 | |||
| Spindel travel | mm | 350 | |||
| Number of spindel speeds | 16 | ||||
| Range of spindel speeds | r/min | 25-2000 | |||
| Number of spindle cutting feeds | 16 | ||||
| Range of spindel cutting feeds | mm/r | 0.04-3.2 | |||
| Power of main drive motor | kW | 4 | |||
| Voltage | V | 380, 440/220, 420 | |||
| Frequency | Hz | 50, 60 | |||
| Weight | N.W. | kg | 4340 | 4500 | 4680 |
| G.W. | 5340 | 4800 | 5680 | ||
| Overall dimension (L×W×H) | CM | 263×101×284 | |||
| Dimension (L×W×H) | CM | 262×123×288 | 292×123×288 | 330×123×288 | |
| Model | RG63×16 | RG63×20A | RG63×25 | ||
| Max drilling diameter | mm | 63 | |||
| Distance between spindle axis and column | Max | mm | 1650 | 2050 | 2550 |
| Min | 450 | ||||
| Distance between spindle end and working surface of base plate | max | mm | 1600 | 1600 | 1600 |
| min | 400 | ||||
| Taper in spindle (Morse) | Morse | No.5 | |||
| Spindel travel | mm | 400 | |||
| Number of spindel speeds | 16 | ||||
| Range of spindel speeds | r/min | 20-1600 | |||
| Number of spindle feeds | 16 | ||||
| Range of spindel feeds | mm/r | 0.04-3.2 | |||
| Power of main drive motor | kW | 5.5 | |||
| Voltage | V | 380, 440/220, 420 | |||
| Frequency | Hz | 50, 60 | |||
| Weight | N.W. | kg | 6700 | 7000 | 7400 |
| G.W. | 7700 | 8000 | 8400 | ||
| Overall dimension (L×W×H) | CM | 290×125×344 | 311×125×344 | 361×125×344 | |
| Dimension (L×W×H) | CM | 347×147×318 | |||
