Audited Supplier
rf dryer for transformer insulation carboard
Specifications:
Model | Power Kw | Frequency | Tube model | Pressure | Working electrode size mm | Remark |
YF-HFM15-B | 15-50Kw | 27.12MHz | 8T85 | >20T | 600×1000 |
hydraulic
touch screen display Automatic Power Tracking
|
YF-HFM15-D | 8T85 | >20T | 600×1000 | |||
YF-HFM25-B | 8T25R | >20T | 600×1000 | |||
YF-HFM25-D | 8T25R | >20T | 600×1000 | |||
YF-HFM35-B | 8T87R | >30T | 700×1200 | |||
YF-HFM35-D | 8T87R | >30T | 700×1200 |
Machine application range:
Hf Insulation Cardboard Drying Machines is mainly used for drying and forming products such as insulating cardboard.At the same time the machine can be used for wood drying.
About Hf Insulation Cardboard Drying Machines :
CHARACTERISTICS OF HIGH FREQUENCY DRYING PROCESS
FOR INSULATION BOARD
It is an advanced process method to dry and mould the insulated board with high frequency electric field.
This production method has many obvious advantages compared with the traditional steam, electric drying and hot air processing methods.
The high frequency drying equipment developed by our company for high voltage transformer's insulation board is advanced in technology and perfect in function. For many years, it has been applied to a large number of large enterprises at home and abroad. All well received by users both at home and abroad.
In addition, high frequency heating is superior to traditional drying and microwave drying, that is, electric field can realize selective heating through mould, concentrate energy on the location where heat is needed, and further avoid unnecessary consumption.
Therefore, it can not only greatly save energy, but also greatly shorten the heating time and improve the production efficiency.
Angle ring heating time usually chord length 550mm and thickness 2.5-3mm of not more than 6 minutes, chord 700mm angle ring heating time is 8 minutes. In the process of heating for 6-8 minutes in total consumption averaged only 1.3 kw/h. If the multi-layer material is dried together at the same time, the cost will be reduced more.
2.Dry thoroughly, the inside and outside temperature are uniform. Because in the heating process, the material of the water evaporated quickly, and the heat dissipation condition is better than the inner surface, the inner temperature will be slightly higher than the outer layer, according to the material drying theory: with heating process, maintain steam pressure and heat transfer in same direction is most conducive to the drying of materials.
This heating method not only makes the internal fast and thorough, but also completely avoids the phenomenon of the external coke.
Because of the high frequency electric field heating both inside and outside, it is more suitable for the insulation material or multi-layer material to be heated at the same time.
3.Improve the quality of products to meet the requirements of more high-grade insulation. When the material is heated in high frequency electric field, the equipment will put pressure on the mold, so that the material in the water was a lot of extrusion and molding in the electric heating at the same time.
In this process, if the material itself contains impurities like metal powder with low insulating, impurity will produce high temperature overheating and even breakdown insulating board in high frequency electrical field. At this time the equipment will warning alert,and start the protection system, so that the disqualified material is eliminated during the heating process.
Ensure the quality of the product so that it is suitable for higher insulation requirements.
4.Simple operation, safe and environmental protection.
This high-frequency drying equipment does not require any auxiliary equipment. After electrifying and material loading, the whole drying process can be completed by pressing a button. The operation is very simple.
There is no pollution to the environment. Without any dust, smoke or high temperature.
The national high frequency electric field leakage standard: 25V/m, our company's equipment is tightly shielded by various protection technologies. The measured leakage value is only 0.2-1V/m, which is 20 times better than the national standard. Effectively protect the human body and protect other equipment from the high frequency electric field.
Hf Insulation Cardboard Drying Machines details:
When the equipment is working, the screen door is closed to effectively reduce electromagnetic radiation.
Hf Insulation Cardboard Drying Machines structure:
1.Confirm customer needs-Analyze customer's products-Formulate technical solutions
2.Quotation after confirming the technical solutions - production equipment after payment and adjustment test - delivery after customer acceptance
Liaoning UNIFY high frequency equipment Co., Ltd. which specializing in R & D and manufacturing of high frequency welding equipment, high frequency drying equipment, ultrasonic equipment and automatic production line. The company is located in the area of Tieling Economic Development ZoneOver the 31 years, UNIFY has always been on the road of science and technology. Many original models, such as sunvisor welding machine, full-automatic car carpet welding machine, transformer insulation board drying machine have been developed, which has reached the leading level in the world. It is widely praised by customers both in china and abroad.
So far, UNIFY have contributed their own strength to the social and economic development. We have always been in good faith and sincerely treat people.
In the future development, UNIFY company will still take the benefit of the society as our own responsibility, with innovation to be a scientific and technological company as our goal.
Our quality management system is in conformity with iso9001 standard and our company is allowed to affix the European Union "CE" mark on our products.
Q. I like your design, but couldn't find the right model from the products catalog, is custom size available?
Customization is available. Equipment will be built on request from client.
Q. What should I do if the products have any quality problems?
We provide new-for-break service within the warranty period. Usually, I will give you extra vulnerable parts in addition.
Q. What are Our strengths?
31 years' experience in High Frequency technology. Has maintained the technical leading and the innovation spirit. We have been pursuing excellent quality and perfect support service.
Q. Why choose us?
Certified by ISO9001 and CE. Our equipment provides stable operation all over years.
