Audited Supplier
Vehicle Model and Dimensions:
Model: National VI Dongfeng Tianjin KR Refrigerated Truck
Overall Vehicle Size: 9200 x 2600 x 3960 mm
Box Size: 6800 x 2440 x 2570 mm
Chassis Configuration:
Wheelbase: 5000 mm
Cab: High-roof double sleeper cab with electric tilt
Engine: Cummins 6-cylinder 290 HP diesel engine
Transmission: Fast 8-speed gearbox
Tires: 275 vacuum tires
Other Features: Central locking, electric windows, remote key, air-suspension seat with ventilation and heating, multifunction steering wheel, electric mirrors with heating, reversing camera, driving recorder, multimedia screen, 600-liter aluminum fuel tank
Body Configuration:
Box Construction: Inner and outer fiberglass, 8 cm thick insulation extruded board, aluminum patterned floor, aluminum profiles for edging and corner strips, stainless steel locks, hinges, and door frames with thermal break strips
Lighting: LED interior lighting
Structural Features: Aircraft beams, 4-layer labyrinth seal strips on the door, single side door, double rear doors, and other standard equipment
Optional Box Configurations: Ventilation slots,Meat hook tracks,Slots,
Optional Refrigeration Units: Thermo King ,Carrier , Ice Power,Kelly,Yide,Huatai
This translation covers all the detailed configurations provided for the National VI Dongfeng Tianjin KR refrigerated truck.
 |  |  |
| 1. The procurement of raw materials strictly controls the quality, with high-strength and environmentally friendly fiberglass reinforced plastic and a compression coefficient of over 400p. After the vehicle flips over, there is no deformation in the carriage, and the goods can be removed normally. | 2. Reinforced bottom plate, (Blue brand refrigerated truck bottom plate is laid with a whole piece of bamboo plywood without joints or seams) with a special and unique bottom plate structure, which ensures both the bearing capacity of the bottom plate and the insulation performance of the box. | 3. The solid wood frame has good insulation performance, and the cabin has toughness and strong impact resistance. |
 |  |  |
| 4. The vehicle's bottom plate is equipped with fiberglass anti slip plates, which are corrosion-resistant. The junction of the box bottom plate is treated with anti leakage measures, and the interior is collision resistant to prevent damage to the cargo compartment caused by forklift loading and unloading. | 5. The carriage floor and auxiliary beam are connected by pressure plates, which have good stability and flexibility. | 6. All metal sheets are automatically fully welded and seamlessly welded, fully ensuring that the metal inner panels of refrigerated trucks for special purposes such as aquatic products do not leak. |
 |  |  |
| 7. After a real accident inspection, the box overturned on the highway when fully loaded. After being straightened, the box is basically intact, made of real materials, and sturdy and durable. | 8. The joints of various parts of the cabin are sealed with sealing glue, which has good sealing performance, no water leakage, and high insulation. | 9. The four corners of the rear door frame are reinforced, sturdy and durable; Door frame cold bridge partition treatment for better insulation performance. |
1: Unique board making process and reasonable structure.2: Lightweight design, special steel secondary beam, low center of gravity, safe and reliable.
3: The cabin is sturdy and durable, and it won't fall apart when fully loaded and overturned.
4: Environmentally friendly box body, the raw materials used are strictly screened and meet environmental standards, and will not cause pollution to food during transportation.
5: Good corrosion resistance, no rust or fading even after long-term use.
6: Strong sealing, good insulation performance, energy saving and consumption reduction.
7: Anti leakage. The unique waterproof treatment is used at the junction of the cabin body, which does not leak and has a long service life.
8: Impact resistance, with anti-collision treatment around the interior of the cabin, making the interior walls of the cabin less prone to damage.
9: The bottom plate is solid, making it easy for forklifts to load and unload goods.10: Long service life, it can truly achieve three generations of use for one vehicle without changing the cabin.
After Sales Service
Answer and solve your questions and consult within 24 hours
Overseas job site service available
One year guarantee about three key parts(axle, engine, transmission).Other spare parts could be supplied by cost price.
Other services:
1.All trucks and trailers are new and be customized to meet all your requirement.
2. All trucks and trailers are with 12 months quality guarantee.
3. CKD and SKD are available.
4. Technical support are provided.
Q1. Is your company a factory or a trading company?
A: We are a leading manufacturer of special trucks, tank trucks, trailers, and spare parts in China. Welcome to visit our special vehicle production base in Suizhou City, China.
Q2. What are your payment terms?
A: T/T 30-50% as deposit, the rest to be paid before delivery. We will show you photos of the products and packages before you pay the balance.
Q3. What are your delivery terms?
A: EXW, FOB, CFR, CIF, DAF, DDU.
Q4. How about your delivery time?
A: Generally, it takes 20 to 30 days after receiving the advance payment. The specific delivery time depends on the items and quantity of the order.
Q5. Can you customize the products to meet my requirements?
A: Yes. We have a professional R&D team, and we can produce products exactly as you require.
Q6. What is the price of your products?
A: We are factory direct sales, so the price is very competitive. Different products have different prices. The price
also depends on your special needs. To know the exact price, please contact us!
Q7. Do you test all the goods before delivery?
A: Yes, we do 100% testing before delivery.
Q8. What service can I get from you?
A: We provide lifetime tracking service and a one-year free warranty for all our products.
