Audited Supplier
| Item | Unit | HVM8 | HVM11 | V11 |
| Travels | ||||
| Xtravels | mm | 800 | 1100 | 1100 |
| Y travels | mm | 550 | 600 | 600(650 Option) |
| Z travels | mm | 550 | 600 | 700(750 Option) |
| Worktable | ||||
| Worktable size | mm | 1000*550 | 1300*600 | 1200*600(650 Option) |
| Max.weight on worktable | kg | 600 | 900 | 800 |
| T-slots(No.-W*distance) | mm | 5-18*90 | 5-18*90 | 5-18*120 |
| Spindle | ||||
| Distance from spindle end to worktable | mm | 120-670 | 120-720 | 95-795 |
Distance from spindle center to column guide surface | mm | 590 | 664 | 686 |
| Max.Spindle speed | rpm | 12000 | 12000 | 12000 |
| ATC Auto Tool Magazine | ||||
| Spindle taper | # | BT-40 | BT-40 | BT-40 |
| Tools capacity | Bit | 24 | 24 | 24 |
| Max.tool Weight | kg | 8 | 8 | 8 |
| Max.tool Length | mm | 300 | 300 | 300 |
| Max.tool Diam | mm | 75/150 | 75/150 | 75/150 |
| Basic parameters | ||||
| Spindle power | kw | 11/15 | 11/15 | 11/15 |
| X-axis rail specification | mm/min | 48000 | 30000 | 36000 |
| Yaxis rail specification | mm/min | 48000 | 30000 | 36000 |
| Z axis rail specification | mm/min | 36000 | 30000 | 36000 |
| Cuting speed | mm/min | 12000 | 12000 | 1-12000 |
| Axis motor | kw | 3.0/3.0/3.0 | 3.0/3.0/3.0 | 3.0/3.0/3.0 |
| Water tank capacity | L | 200 | 300 | 300 |
| Air consumption | kg/cm² | 6 | 6 | 6 |
| Power requested | kva | 20 | 20 | 20 |
| VDI3441 (JISB6338) | ||||
| Positioning | mm | P0.008(±0.003/300) | P0.01(±0.004/300) | P0.01(±0.004/300) |
| Repeatability | mm | Ps0.006(±0.002) | Ps0.008(±0.003) | Ps0.008(±0.003) |
| Machine Weigh | kg | 5500 | 8000 | 6500 |
| Diametion (L*W*H) | mm | 2460*2350*2550 | 2900*2750*2520 | 3100*2785*2700 S |
| Standard proximity and function | Optional proximity and function | |||
| 1.FANUC 0i-MF Plus controller | 12.Heat exchanger | 1.Mitsubishi M80 controller | ||
| 2.BT40 inclined spindle on 12000rpm | 13.Rigid tapping | 2.BT40 inclined spindle on 15000rpm | ||
| 3.Arm type ATC of 24 tools | 14 . Work light | 3.CTS system | ||
| 4.Oil coolant system | 4.Triaxial optical scale device | |||
| 5.Spindle blushing | 15.Warm lamp | |||
| 6.Automatic lubrication system | 5.Disc oil water separator | |||
| 7.Full cover | 16.Manual loosening device | 6.Chain type chip conveyor and tank | ||
| 8.Cutting coolant system | 17.Toolbox and tools | 7.Safety door system | ||
| 9.Tank and waterbox | 18. Anchor bolts and spacers | 8.Automatic tool measurement system | ||
| 10.(MPG)Handwhel(MPG) | 9.Rotary table (fourth axis) | |||
| 11.Air &cleaning gun | 19.Transformer | |||
| 20.Mechanical Operation and Maintenance Manual | ||||
| Item | Unit | SK-1825 | SK-1825H |
| Travels | |||
| X-axis | mm | 2500 | 2500 |
| Y-axis | mm | 1800 | 1800 |
| Z-axis | mm | 800 | 800 |
| Spacing between columns | mm | 2000 | 2000 |
| Distance from spindle nose to table | mm | 250-1050 | 580-1380 |
| Worktable | |||
| Table size (L X W) | mm | 1620X2500 | 1620X2500 |
| T-slot (Quantity - size X distance) | mm | 9-22X180 | 9-22X180 |
| Maximum average load of table | kg | 4000 | 5000 |
| Spindle | |||
| Spindle revolution | rpm | Belt 8000 | Belt 8000 |
| Spindle revolution (optional) | rpm | Direct connection 8000 | Direct connection 8000 |
| Spindle revolution (optional) | rpm | ||
| Spindle motor power | kw | 18/22 | 18/22 |
| Spindle taper hole | BT50 | BT50 | |
| Speed | |||
| Fast feed velocity (X,Y,Z) axis | m/min | 20/20/18 | 20/20/18 |
| Cutting feed speed (X,Y,Z) axis | mm/min | 5~10000 | 5~10000 |
| Automatic tool changing mechanism ATC | |||
| Tool storage capacity | pcs | 24(30/40/60/120-OPT) | |
| Maximum tool length | mm | 300 | 300 |
| Maximum tool weight | kg | 20 | 20 |
| Automatic tool change maximum tool diameter (full tool) | mm | 125 | 125 |
| Automatic tool change maximum tool diameter (air) | mm | 210 | 210 |
| Accuracy VDI3441(JISB6338) | |||
| Positioning | mm | P0.025(±0.005/300) | P0.025(±0.005/300) |
| Repeatabity | mm | Ps0.023(±0.004) | Ps0.023(±0.004) |
| Other | |||
| Wind pressure supply | kg/cm² | 6.5 | 6.5 |
| Power supply | kva | 50 | 50 |
| Maximum machine floor area (L X W) | mm | ||
| Maximum machine height | mm | 4500 | 4500 |
| Machine weight | T | 18 | 19 |
| The company reserves the right to change the above specications for products or technologies | |||
Q1: How is the warranty?
A1: Warranty time is 12months after BL date.
Q2: Can we visit your factory before order?
A2: Sure. All new and old friends are welcomed to visit us at our factory. Besides, we can pick up you at the station or airport if needed. We will be very honored to help with tickets and accommodation booking.
Q3: Do you have a stock?
A3: Sorry, most of our machines don't have stock, we always produce according to order. However, if during fairs months, maybe have few samples back from fairs.
Q4: What's the MOQ?
A4: One set only.
Q5: How about your quality?
A5: We have approved the ISO9001:2008 quality management system. ISO14001 Environmental Management System and OHSAS18001 International Occupational Health and Safety Management System. Most products have passed European and American safety standards certification, including CE, GS, EMS&UL. 90% of the products are exported to more than 60 countries and regions worldwide and have always won a high reputation. Therefore, you can rest assured of our high-quality products and the best service.
Q6: Do you have professional engineers?
A6: Yes, we have professional engineers and designers. We can provide OEM services.
Q7: Can you provide customized machines?
A7: Yes, we can design and manufacture according to your specific requirements.
