Audited Supplier
A10vso 31
One Year
One Year
Axial Plunger Pump
Single Cylinder
Hydraulic Driven Reciprocating Pump
Horizontal
V Type
Hydraulic
Pressureoil
Axial Flow
Cast Iron
High Pressure
Engineering, Construction, Metallurgy Machinery...
New
Neutral Label
Standard Export Wooden Case
A10VSO28/45/71/100/140
China
8413503190
Product Description
Rexroth A10vso 31 series A10VSO18,28,45,71,100,140 piston pump Axial Piston Hydraulic Pump Direct From Manufacturer with fast delivery
| Series | A10VSO Series Variable Piston Pumps (Series 31) |
| Specifications | A10VSO28, A10VSO45, A10VSO71, A10VSO100, A10VSO140 |
| Working pressure | Rated pressure: 28 MPa, Peak pressure: 35 MPa |
Control mode: DG - Two-Point Direct Control DR- Pressure Control DRG - Remote Pressure Control DFR, DFR1 - Pressure and Flow Control DFLR - Pressure, Flow and Power Control ED-Electric Hydraulic Control | Characteristic: - Axial piston variable pump with swashplate structure is used for hydrostatic transmission in open circuit. - Flow is proportional to transmission speed and displacement. - By adjusting the angle of the rotating swashplate, the stepless change of flow rate can be realized. - Two shell outlets. - Excellent oil absorption characteristics. - Low noise level. - Long service life. - Axial and radial load capacity of transmission shaft. - Ideal power-weight ratio. - Various control ranges. - Short control time. - The pump is driven by a through shaft, and can be loaded with gear pumps or axial piston pumps less than or equal to the same specifications, that is, 100% through shaft drive. |
| Size | 18 | 28 | 45 | 71 | 100 | 140 | |||
| Version | Standard | ||||||||
| Displacement | Vg max | cm³ | 18 | 28 | 45 | 71 | 100 | 140 | |
| geometric, per revolution | |||||||||
| Nominal pressure | pnom | bar | 280 | 280 | 280 | 280 | 280 | 280 | |
| Maximum pressure | pmax | bar | 350 | 350 | 350 | 350 | 350 | 350 | |
| Maximum speed | at Vg max | nnom | rpm | 3300 | 3000 | 2600 | 2200 | 2000 | 1800 |
| Flow | at Vg max and nnom | qV nom | l/min | 59 | 84 | 117 | 156 | 200 | 252 |
| at Vg max and n = 1500 rpm | qV 1500 | l/min | 27 | 42 | 68 | 107 | 150 | 210 | |
| Power | at qV nom and pnom | P | kW | 30 | 39 | 55 | 73 | 93 | 118 |
| at qV 1500 and pnom | P 1500 | kW | 12.6 | 20 | 32 | 50 | 70 | 98 | |
| Torque | at Vg max and pnom | M | Nm | 80 | 125 | 200 | 316 | 445 | 623 |
| Weight (approx.) | m | kg | 12 | 15 | 21 | 33 | 45 | 60 | |
Safety instructions:
- A10VSO pump is designed to be used in open circuit.
- The project planning, assembling and commissioning of the axial piston unit must be carried out by qualified personnel.
- Before using the axial plunger unit, please read the corresponding manual completely.
- If necessary, please ask Rexroth for these handbooks.
- During and shortly after operation, there may be a risk of burning of the axial piston unit (especially the electromagnet). Appropriate safety measures (such as wearing protective clothing) should be taken.
- As per the different working conditions (working pressure, oil temperature) of the axial piston unit, the characteristics may change.
- Work pipeline oil outlet:
· Oil nozzles and fixed threads are designed for maximum specified pressure. Machine or system manufacturers must ensure that the safety factor of connecting components and pipes meets the specified working conditions (pressure, flow, hydraulic oil, temperature).
· Work pipeline nozzles and functional nozzles are only designed for hydraulic pipelines.
- Pressure cut-off and pressure control do not provide overvoltage protection. Separate relief valves are provided in the hydraulic system.
- The data and instructions contained here must be followed.
- The product has not been certified as a department that meets the requirements of DIN EN ISO 13849's general machine safety concept.
- The following tightening torque is used:
· Connector:
Refer to manufacturer's instructions for tightening torque of the joints used.
· Installation bolts: For installation bolts that meet the ISO metric thread standard of DIN 13 and the thread standard of ASME B1.1, we recommend that tightening torque be checked separately according to VDI 2230.
· Thread holes in the axial plunger unit:
The maximum allowable tightening torque MG Max is the maximum value for threaded holes and shall not exceed that value.
· Locking screw:
For the metal locking screw provided with the axial plunger unit, the tightening torque MV is required.
| R910994945 | A A10VSO 18 DFR1/31R-VPA12G10 -SO128 |
| R902557978 | A A10VSO 18 DFR1/31R-VPA12G20 |
| R902543605 | A A10VSO 18 DFR1/31R-VPA12H00 |
| R910999932 | A A10VSO 18 DFR1/31R-VPA12K01 |
| R902518724 | A A10VSO 18 DFR1/31R-VPA12K01 -SO 52 |
| R902480018 | A A10VSO 18 DFR1/31R-VPA12K01 -SO 52 |
| R902532453 | A A10VSO 18 DFR1/31R-VPA12K01 *GO2EU* |
| R902501872 | A A10VSO 18 DFR1/31R-VPA12K52 |
| R902554991 | A A10VSO 18 DFR1/31R-VPA12KB2 |
| R902476036 | A A10VSO 18 DFR1/31R-VPA12KB2 |
| R910991846 | A A10VSO 18 DFR1/31R-VPA12N00 |
| R902560668 | A A10VSO 18 DFR1/31R-VPA12N00 |
| R902549814 | A A10VSO 45 DFLR/31R-VPA12N00 |
| R902546648 | A A10VSO 45 DFLR/31R-VPA12N00 |
| R902565845 | A A10VSO 45 DFLR/31R-VPA12N00 |
| R902548589 | A A10VSO 45 DFLR/31R-VPA12N00 -S2709 |
| R902483079 | A A10VSO 45 DFLR/31R-VPA12N00 -S3022 |
| R902480099 | A A10VSO 45 DFLR/31R-VPA12N00 -SO160 |
| R902412322 | A A10VSO 45 DFLR/31R-VPA12N00 -SO258 |
| R902539720 | A A10VSO 45 DFLR/31R-VPA12N00 -SO258 |
| R902546625 | A A10VSO 45 DFLR/31R-VPA12N00 -SO258 |
| R902511713 | A A10VSO 45 DFLR/31R-VPA12N00 -SO413 |
| R902561263 | A A10VSO 45 DFLR/31R-VPA12N00 C |
| R902460836 | A A10VSO 71 DFEH/32R-VRB22U99 -SO479 |
| R902462508 | A A10VSO 71 DFEH/32R-VRB22U99 -SO487 |
| R902454119 | A A10VSO 71 DFEH/32R-VRB22U99*UNGUEL*** |
| R902462824 | A A10VSO 71 DFEH/32R-VRB22UB8 |
| R902449389 | A A10VSO 71 DFEH/32R-VRB22UB8*UNGUEL*** |
| R902462503 | A A10VSO 71 DFEH/32R-VRB32U00 |
| R902462826 | A A10VSO 71 DFEH/32R-VRB32U00 -SO479 |
| R902462825 | A A10VSO 71 DFEH/32R-VRB32U68 |
| R902449379 | A A10VSO 71 DFEH/32R-VRB32U68*UNGUEL*** |
| R902454856 | A A10VSO 71 DFEH/32R-VRB32U99*UNGUEL*** |
| R902449377 | A A10VSO 71 DFEH/32R-VRB32U99*UNGUEL*** |
| R902462827 | A A10VSO 71 DFEH/32R-VRB32UB8 |
| R902449390 | A A10VSO 71 DFEH/32R-VRB32UB8*UNGUEL*** |
| R902536908 | A A10VSO 71 DFEH/31R-PSC92KC3 -SO541 |
| R902462536 | A A10VSO 71 DFEH/32L-VRB22U99 |
| R902462689 | A A10VSO 71 DFEH/32L-VRB22U99 -SO487 |
| R902511413 | A A10VSO 71 DFEH/32L-VRB22U99E -SO541 |
| R902462535 | A A10VSO 71 DFEH/32L-VRB32U99 |
| R902462817 | A A10VSO 71 DFEH/32R-VPB12N00 |
| R902448745 | A A10VSO 71 DFEH/32R-VPB12N00*UNGUEL*** |
| R902462818 | A A10VSO 71 DFEH/32R-VPB22U01 -SO479 |
| R910931692 | A A10VSO140 DFR /31R-VPB12K59 |
| R902466214 | A A10VSO140 DFR /31R-VPB12K68 |
| R910942505 | A A10VSO140 DFR /31R-VPB12K68 |
| R902565310 | A A10VSO140 DFR /31R-VPB12KB5 |
| R902564332 | A A10VSO140 DFR /31R-VPB12KB6 -SO511 |
| R910975486 | A A10VSO140 DFR /31R-VPB12L60 |
| R902415602 | A A10VSO140 DFR /31R-VPB12M50 |
| R902561619 | A A10VSO140 DFR /31R-VPB12N00 |
