Audited Supplier
Q6920
on Line Support
12 Months
Electronic Industry
Electric
Roller Conveyor Shot Blasting Machine
High Cleanliness
Automatic
CE
Critical Cleaning / Residue Free
New
Customized
Green or Blue
kunyuan
Wooden Case/Foam
60m3
China
84243000
Product Description
Application of Machine
Roller Pass-through Type Shot Blasting Machine is to remove the rust,strengthen and spray anti-rust film for welded workpieces before its processing.
Advantages after cleaning:
Mainly Feature
1. Rolling Conveying System
Mainly Technical Parameter
Roller Pass-through Type Shot Blasting Machine is to remove the rust,strengthen and spray anti-rust film for welded workpieces before its processing.
Advantages after cleaning:
- Improve its crrosion resistance of mechanical products & section steel.
- Improve the fatigue performance of components,extending its life.
- Optimize the component surface state.
- To be favor for feeding of CNC cutting machine and precision output.
- Because of the regular shap of workpieces before processing, it's helpful for dust-removing and paint spraying.
- Improve cleaning efficiency greatly.
- Reduce working intension.
- Reduce the environmental pollution.
Mainly Feature
1. Rolling Conveying System
- There is a detective roller on each side of inlet roller and output roller
- The full set of roller conveying system is able to work simultaneously, but aslo to work separately.
- ZGMn 13 protection,building-block shield installation.
- Adopt computer simulation to determine the place of blast wheel.
- Installed the fault alarming system for the abrasive recycling system
- Purifying rate is above 99%
- The whole line is controlled by programmable logical controller (PLC) from Siemens
- Distributed controlling desks are located at suitable positions
As an option, the system can be equipped with the software of "Steel plate pretreatment line, dynamic simulating and monitoring system (controlling center)" - Mostly electric components are from Siemens
| No. | Item | index | ||
| 1 | Size of cross-section workpiece | Steel plate | 6000×2000×(3-25) mm | |
| 2 | Peak load of roller | 1000 kg/m | ||
| 3 | Speed | Roller conveying speed:0.5~4m/min (Adjustable) | ||
| Steel plate blasting speed:1~2 m/min(adjustable) | ||||
| 4 | Annual Capacity | 15000 T/year | ||
| 5 | Dust-removing grade | GB8923-Sa2.5 | ||
| 6 | Abrasive | F0.8~1.6 (Steel cut wire shot) | ||
| 7 | Steel surface roughness | Ra12.5-50 mm | ||
| 9 | Noise level | <= 90 dB(A) Standard GBJ87-85 | ||
| 10 | Exhaust emission | < 80 mg/m3 Standard GBJ4-73 | ||
| 11 | Exhaust item content | Standard TJ36-79 | ||
| 12 | Total wind capacity | 21000 m3/h | ||
| 13 | Power consumer | Total power | ~ 174.4 kw | |
| 14 | Size | Length:~19000mm | ||
| Width: 4300 mm(except dust-removing system) | ||||
| Height: 6261 mm | ||||
| Pit: 1570(part2170) mm | ||||
Mainly Technical Parameter
| No. | Item | Parameter | Remark | |||
| 1 | Shot blast cleaning and dust removing system | Blast Wheel | Quantity | 6 | Adopt UK SPEN-CER & USA WHEELBRATER | |
| Model | KYQ035 | |||||
| Abrasive Flow Rate | 6×250 kg/min | |||||
| Power | 6×15kw | |||||
| Bucket Elevator | Lifting capacity | 90T/h | ||||
| Reducer | XWD7.5-6-1/17 | |||||
| Power | 7.5 kw | |||||
| Separator | Conveying capacity | 90T/h | ||||
| Reducer | XWD5.5-5-1/29 | |||||
| Power | 5.5kw | |||||
| Vertical Screw Conveyor | Conveying capacity | 90 T/h | ||||
| Reducer | XWD5.5-5-1/29 | |||||
| Power | 5.5 kw | |||||
| Horizontal Screw Conveyor | Conveying capacity | 90T/h | ||||
| Reducer | XWD4-5-1/29 | |||||
| Power | 4 kw | |||||
| Shot Blasting Cabinet | Max. height of inlet | 200 mm | Installation of modular manganese steel | |||
| Max. width of inlet | 2100 mm | |||||
| 2 | Abrasive Cleaning Device | Abrasive collecting screw | Collecting capacity | 30T/h | ||
| Motor power | 2.2kw | |||||
| Rolling brush and abrasive screw conveyor | Diameter of brush | Φ900mm | ||||
| Motor power | 3kw | |||||
| Abrasive blower | Blower model | 9-19 No.6.3A | ||||
| Motor power | 18.5kw | |||||
| Lifting frame | Motor power | 1.5kw | ||||
| Motor power | 2.2kw | |||||
| 2 | Roller conveying system | Roller Dia.×Roller distance | F100×600mm | |||
| Conveying length | 5915 mm | |||||
| Valid width | 2400 mm | |||||
| Conveying speed | 0.5~4 m/min | |||||
| Reducer | XWE1.5-5-1/187 | |||||
| Power | 1.5 kw | |||||
| 3 | Fore roller | Roller Dia.×Roller distance | F100×600mm | |||
| Conveying length | 6400 mm | |||||
| Valid width | 2100 mm | |||||
| Conveying speed | 0.5~4 m/min | |||||
| Reducer | XWE1.5-5-1/187 | |||||
| Power | 1.5kw | |||||
4 | Rear roller | Roller Dia.×Roller distance | F100×600mm | |||
| Conveying length | 6685 mm | |||||
| Valid width | 2100 mm | |||||
| Conveying speed | 0.5~4 m/min | |||||
| Reducer | XWE1.5-5-1/187 | |||||
| Power | 1.5 kW | |||||
| 5 | Shot blasting and dust-removing system | Blowing capacity | 17000 m3/h | |||
| Fan model | 4-72No.5A | |||||
| Power | 2*15kW | |||||
| 6 | Electric control system | Adopt PLC from SIEMENS | ||||
