Audited Supplier
1.The frame is steel welded structure, have sufficient strength and rigidity, eliminate internal stress and high frequency
vibration, to ensure the overall accuracy of the fuselage. Has a good rigidity, two cylinders fixed on the left and right columns (wallboard).
2. Adopt integrated hydraulic system, more reliable and easy for maintenance. and the hydraulic system from Bosch-Rexroth, Germany.
3. The distance of the back gauge is adjusted by the motor and is well adjustment is displayed by E21S.
4. Equipped with lighting-alignment, so as to align when shearing. The stroke of knife beam can be adjusted in stepless mode.
QC11Y/K series is guillotine type shearing machine .
QC12Y/K series is swing beam type shearing machine.
There are mainly four kinds of difference between.
Difference 1: Guillotine Type shearing machine cutting result is more better than swing beam type .
Three roller guide structure is adopted, and the front prepressure guide rail is used to keep the tool frame sticking to the upper guide rail and the lower guide rail.
In the shear, the clearance of the blade can be adjusted according to the demand of different sheet materials to achieve better shear quality.
The right blade clearance will receive satisfactory shear effect. The machine tool is equipped with a quick blade clearance adjusting mechanism, which can meet the needs of different thickness of plate and material, and can be adjusted by rotating the hand wheel.Main Configuration :
| NC Control system | E21S/CT8P/DAC360T |
| Main Electric Components | Electrical from French |
| Main Motor | Siemens from Germany Brand |
| RAM Drive | Energy-saving servo drive from Taiwan delta |
| Hydraulic System | From Germany |
| Sealing Element | anti-corrosion |
| Tubing connector | EMB form Germany |
| Ball screw/ Polished rod | HIWIN from TaiWan |
| Foot Switch Electric Components | From French |
| Safety light certain | (Optional) |
1.Hydraulic valve use Germany Rexroth brand.
2.Main motor use Siemens brand.
3.Oil gear pump use USA Sunny Brand, low noise, good quality.
4.Seal ring use Japan NOK brand, sealing performance, reliable, long life.
5.There are clear and intuitive oil level and oil temperature display.
6.The machine can continues to work at rated load, hydraulic system steady and do not have leak, high accuracy.
Advantage 2: Electrical Control System
1.Electrical adopt France Schneider brand.
2.With a movable foot switch operation, safety key to start machine, machine install emergency button.
1.Backgauge use ball screw to improve accuracy.
2.Backgauge driven by motor with digital display.
3.Our machine add frequency inverter, X axis can one time positioning, if do not add this part, X axis cannot one time positioning.
Advantage 4: E21 NC controller
1.Backstop control;
2.Control of ordinary motor or frequency converter; Intelligent 3.positioning;
4.Dual-channel programmable digital output;
5.Artifacts count40 program stores,each program 25 steps;
6.Unilateral positioning Concession function;
7.Parameter 1 step backup and restore: Metric system
1.Panel based housing
2.Bright LCD screen
3.Back / front gauge control
4.Retract function
5.Cutting angle and gap control
6.Stroke length limitation
7.Manual movement of all axes
8.Force control
9.Sheet thickness measurement
10.Return to Sender function
11.Second and third servo axis (DAC-362T)
12.Sheet support
▪ Intuitive and user-friendly interface.
▪ Large, vivid and high-contrast touchscreen.
▪ Clear display, large keys, simple pages displaying all the information the operator needs.
▪ Very simple single cuts with EasyCut page.
▪ Programming allows efficient mass- production of complex cuts.
▪ Online help and warning pop-ups make it a very user-friendly software.
▪ Automatic calculations of shear functions according to materials.
▪ Automatic blade gap or cutting angle.
▪ Automatic back gauge correction.
▪ Automatic back gauge foldaway.
▪ Front or back gauge management.
▪ Anti-twist management.
▪ 2/3- position sheet support.
| Type | Cutting thickness(mm) | Cutting width(mm) | Travel times (times/min) | Bumper distance(mm) | Cutting angel(º) | Throat depth(mm) | Power (kw) | Dimension LxWxH (mm) |
| 4x2500 | 4 | 2500 | >=18 | 600 | 0.5-2 | 100 | 5.5 | 3130x1500x2070 |
| 4x3200 | 4 | 3200 | >=16 | 600 | 0.5-2 | 100 | 7.5 | 3830x1500x2070 |
| 4x4000 | 4 | 4000 | >=12 | 600 | 0.5-2 | 100 | 7.5 | 4630x1500x2070 |
| 6x2500 | 6 | 2500 | >=15 | 600 | 0.5-2 | 100 | 7.5 | 3150x1600x2170 |
| 6x3200 | 6 | 3200 | >=13 | 600 | 0.5-2 | 100 | 7.5 | 3850x1600x2170 |
| 6x4000 | 6 | 4000 | >=10 | 600 | 0.5-2 | 100 | 7.5 | 4650x1600x2170 |
| 6x5000 | 6 | 5000 | >=8 | 600 | 0.5-2.5 | 100 | 11 | 5650x1600x2270 |
| 6x6000 | 6 | 6000 | >=6 | 600 | 0.5-2.5 | 100 | 11 | 6650x1610x2380 |
| 8x2500 | 8 | 2500 | >=14 | 600 | 0.5-2 | 100 | 11 | 2170x1600x2170 |
| 8x3200 | 8 | 3200 | >=12 | 600 | 0.5-2 | 100 | 11 | 3870x1600x2170 |
| 8x4000 | 8 | 4000 | >=10 | 600 | 0.5-2 | 100 | 11 | 4670x1600x2170 |
| 8x5000 | 8 | 5000 | >=8 | 600 | 0.5-2.5 | 100 | 11 | 5670x1600x2270 |
| 8x6000 | 8 | 6000 | >=6 | 600 | 0.5-2.5 | 100 | 15 | 6670x1610x2380 |
| 10x2500 | 10 | 2500 | >=12 | 600 | 0.5-2 | 100 | 11 | 3190x1600x2170 |
| 10x3200 | 10 | 3200 | >=10 | 600 | 0.5-2 | 100 | 11 | 3890x1600x2170 |
| 10x4000 | 10 | 4000 | >=8 | 600 | 0.5-2 | 100 | 11 | 4690x1600x2170 |
| 10x5000 | 10 | 5000 | >=6 | 600 | 0.5-2.5 | 100 | 11 | 5690x1600x2270 |
| 10x6000 | 10 | 6000 | >=4 | 600 | 0.5-2.5 | 100 | 15 | 6690x1610x2380 |
| 12x2500 | 12 | 2500 | >=10 | 800 | 0.5-2.5 | 100 | 15 | 3270x1850x2315 |
| 12x3200 | 12 | 3200 | >=8 | 800 | 0.5-2.5 | 100 | 15 | 3970x1850x2315 |
| 12x4000 | 12 | 4000 | >=6 | 800 | 0.5-2.5 | 100 | 18.5 | 4770x1850x2315 |
| 12x5000 | 12 | 5000 | >=6 | 800 | 0.5-2.5 | 100 | 18.5 | 5770x1950x2515 |
| 12x6000 | 12 | 6000 | >=4 | 800 | 0.5-2.5 | 100 | 22 | 6770x2100x2750 |
| 16x2500 | 16 | 2500 | >=8 | 800 | 0.5-2.5 | 100 | 18.5 | 3270x1850x2315 |
| 16x3200 | 16 | 3200 | >=7 | 800 | 0.5-2.5 | 100 | 18.5 | 3970x1850x2315 |
| 16x4000 | 16 | 4000 | >=6 | 800 | 0.5-2.5 | 100 | 22 | 4770x1850x2315 |
| 16x5000 | 16 | 5000 | >=5 | 800 | 0.5-2.5 | 100 | 22 | 5770x1950x2515 |
| 16x6000 | 16 | 6000 | >=4 | 800 | 0.5-2.5 | 100 | 30 | 6770x2100x2750 |
| 20x2500 | 20 | 2500 | >=7 | 800 | 0.5-2.5 | 100 | 30 | 3370x2015x2575 |
| 20x3200 | 20 | 3200 | >=6 | 800 | 0.5-2.5 | 100 | 30 | 4070x2015x2575 |
| 20x4000 | 20 | 4000 | >=5 | 800 | 0.5-2.5 | 100 | 37 | 4870x2015x2675 |
| 20x5000 | 20 | 5000 | >=4 | 800 | 0.5-2.5 | 100 | 37 | 5870x2115x2875 |
| 20x6000 | 20 | 6000 | >=3 | 800 | 0.5-2.5 | 100 | 45 | 6870x2300x3200 |
| 25x2500 | 25 | 2500 | >=6 | 1000 | 0.5-3 | 120 | 37 | 3390x2200x2700 |
| 25x3200 | 25 | 3200 | >=5 | 1000 | 0.5-3 | 120 | 37 | 4090x2200x2700 |
| 25x4000 | 25 | 4000 | >=4 | 1000 | 0.5-3 | 120 | 45 | 4890x2350x3000 |
| 32x2500 | 32 | 2500 | >=5 | 1000 | 0.5-3 | 120 | 45 | 3490x2440x2915 |
| 32x3200 | 32 | 3200 | >=4 | 1000 | 0.5-3 | 120 | 45 | 4190x2440x3015 |
| 32x4000 | 32 | 4000 | >=3 | 1000 | 0.5-3 | 120 | 55 | 5100x2500x3315 |
| 40x2500 | 40 | 2500 | >=4 | 1000 | 0.5-3 | 120 | 75 | 3530x2500x3300 |
| 40x3200 | 40 | 3200 | >=3 | 1000 | 0.5-3 | 120 | 75 | 4230x2500x3500 |
Attention: The above date is juso for gour reference, if there is ang disaccord please refer to actual adate.
QC12Y/K-Series Technical Parameter
| Type | Cutting thickness(mm) | Cutting width(mm) | Cutting angle(º) | Material strength (KN/cm) | Stopper adjust range(mm) | Travel times(/min) | Power (kw) | Dimension LxWxH (mm) |
| 4x2500 | 4 | 2500 | 1º30' | <=450 | 20~500 | 14 | 5.5 | 3040x1550x1550 |
| 4x3200 | 4 | 3200 | 1º30' | <=450 | 20~500 | 12 | 5.5 | 3840x1550x1550 |
| 4x4000 | 4 | 4000 | 1º30' | <=450 | 20~600 | 10 | 5.5 | 4600x1700x1700 |
| 4x6000 | 4 | 6000 | 1º30' | <=450 | 20~800 | 5 | 7.5 | 6460x2100x2200 |
| 6x2500 | 6 | 2500 | 1º30' | <=450 | 20~500 | 14 | 7.5 | 3040x1710x1620 |
| 6x3200 | 6 | 3200 | 1º30' | <=450 | 20~500 | 12 | 7.5 | 3840x1710x1620 |
| 6x4000 | 6 | 4000 | 1º30' | <=450 | 20~600 | 9 | 7.5 | 4620x1850x1700 |
| 6x5000 | 6 | 5000 | 1º30' | <=450 | 20~600 | 8 | 7.5 | 3140x1710x1620 |
| 6x6000 | 6 | 6000 | 1º30' | <=450 | 20~800 | 5 | 11 | 6480x2100x2300 |
| 8x2500 | 8 | 2500 | 1º30' | <=450 | 20~500 | 11 | 7.5 | 3040x1700x1700 |
| 8x3200 | 8 | 3200 | 1º30' | <=450 | 20~500 | 8 | 7.5 | 3860x1700x1700 |
| 8x4000 | 8 | 4000 | 1º30' | <=450 | 20~600 | 8 | 7.5 | 4640x1700x1700 |
| 8x5000 | 8 | 5000 | 1º30' | <=450 | 20~600 | 8 | 7.5 | 5400x2400x2000 |
| 8x6000 | 8 | 6000 | 1º30' | <=450 | 20~800 | 8 | 11 | 6480x2100x2350 |
| 10x2500 | 10 | 2500 | 1º30' | <=450 | 20~500 | 10 | 11 | 3040x1800x1700 |
| 10x3200 | 10 | 3200 | 1º30' | <=450 | 20~500 | 10 | 11 | 3860x2000x1700 |
| 10x4000 | 10 | 4000 | 1º30' | <=450 | 20~600 | 10 | 11 | 4650x2100x2000 |
| 10x6000 | 10 | 6000 | 1º30' | <=450 | 20~800 | 10 | 15 | 6500x2100x2300 |
| 12x2500 | 12 | 2500 | 2º | <=450 | 20~600 | 12 | 18.5 | 3140x2050x2000 |
| 12x3200 | 12 | 3200 | 2º | <=450 | 20~600 | 10 | 18.5 | 3880x2150x2000 |
| 12x4000 | 12 | 4000 | 2º | <=450 | 20~600 | 10 | 18.5 | 4680x2150x2100 |
| 12x5000 | 12 | 5000 | 2º | <=450 | 20~600 | 6 | 18.5 | 3240x1900x1900 |
| 12x6000 | 12 | 6000 | 2º | <=450 | 20~1000 | 5 | 18.5 | 6900x2600x2700 |
| 16x2500 | 16 | 2500 | 2º30' | <=450 | 20~600 | 10 | 18.5 | 3140x2150x2000 |
| 16x3200 | 16 | 3200 | 2º30' | <=450 | 20~600 | 10 | 18.5 | 3880x2150x2000 |
| 16x4000 | 16 | 4000 | 2º30' | <=450 | 20~800 | 10 | 18.5 | 4650x2150x2200 |
| 16x5000 | 16 | 5000 | 2º | <=450 | 20~1000 | 6 | 18.5 | 5900x2600x2700 |
| 16x6000 | 16 | 6000 | 2º | <=450 | 20~1000 | 5 | 22 | 6900x2700x2700 |
| 20x2500 | 20 | 2500 | 3º | <=450 | 20~800 | 8 | 22 | 3440x2300x2500 |
| 20x3200 | 20 | 3200 | 3º | <=450 | 20~800 | 8 | 22 | 4150x2350x2700 |
| 20x4000 | 20 | 4000 | 3º | <=450 | 20~1000 | 5 | 22 | 4850x2600x2400 |
| 20x6000 | 20 | 6000 | 3º | <=450 | 20~1000 | 4 | 22 | 6700x3000x3000 |
Attention: The above date is juso for gour reference, if there is ang disaccord please refer to actual adate.
Founded in 2017 years ,Nanjing RONGWIN Machinery Technology Co., Ltd is focus on press brake manufacturing and a professional one-stop smart custom metal fabrication solution service supplier .
We are committed to building a strong Chinese metal working machinery and spare parts supply Chain System , We have a dream "Let China's one-stop smart custom metal fabrication solution serve the world " and "We want to become a respected Chinese press brake manufacture,live 100 years " That's why we're always trying to keep our users satisfied .
We are specialized at metal working machinery and spar parts, like press brake, panel bender,fiber laser cutting machine, shearing machine, rolling machine, V grooving machine, hydraulic press, power press, ironworker, notching machine, tube cutting machine,tube bending machine ,HVAC Dust Machine, punching die, blades, kinds of toolings, etc. We can give customer all the aspect solutions for the metal industry fabrication machinery. We can guide customers for choosing their metal processing equipment so that customer can get the most cost-effective solution by our guide. Meanwhile we also can do O E M & O D M service. We have professional engineer support, high efficiency sales team and competitive price , we design our machine in a top class level which makes our machine in a good looking appearance , due to the good after sale service and reliable quality, we have sold to many foreign customers, they like our machines, they usually buy from us not only one time, now we already sold to more than 70 countries, including Europe, South America like Brazil, USA, Canada, Russia, Vietnam, Pakistan, Australia ,New Zealand, Africa, Middle East country etc. After several years' development, We already applied some patent, and also got CE certificate and SGS for Press Brake, Laser Cutting machine,Panel Bender,V grooving machine etc, we will grow up together with our customer's support, we believe that our company will have a bright future.
Please trust ROGNWIN .We are always trying to make you satisfied .
1.Are you the manufacturer ? Can we visit your factory ?
Yes ,of course you can ,We have our own technical team for products design, welcome to visit our factory and check our machines quality,we will answer your requirements on time.
2.What is your main product ?
Our main products are plate cutting ,bending,straightening machines, panel bender, fiber laser cutting machines, hydraulic machines, V grooving machines, etc. Our main exporting market is South America,Europe,Middle East and Africa.
3.What are the advantages of RONGWIN machines, how can i believe the quality ?
Our factory has the advanced CNC processing equipment to ensure accuracy, and we have professional technical personnel to inspect and ensure that every machine must meet the standard before leaving the factory.
4.Can we become the sales distributor for RONGWIN ?
Yes ,so far we are looking for sales agents from different countries ,if the cooperation is successful ,as an agent ,you would get more preferential price based on sales quantities.
5.What is your payment term ?
T/T ,L/C,Western Union , Secure Payment etc.
6.How can you guarantee the after-sales service ?
First of all, we will provide relevant technical documents and guide you to operate online.Then, if engineers must be arranged, we can also arrange engineers to go abroad for training and debugging.
7.Can your factory provide OEM service ?
Based on sales quantities, we would be very happy to do so.
