S-150-12 110V/220V AC to DC Single Output 12VDC LED Switching Power Supply

Price $18.48 Compare
Min Order 1 Piece
Shipping From Zhejiang, China
Popularity 344 people viewed
Quantity
+-
 

Zhejiang Leyu Electric Co., Ltd.

VIP   Audited Supplier 15 years
Profile Certified by SGS/BV
S-150-12
Single
2 Years
101 - 200W
110-220V
Series Switching Power Supply
Self-excited Switching Power Supply
Frequency Modulation Type
Terminal Power Distribution Equipment
Two-way Transmission
PWM
CE
Leyu
Short Circuit / Overload / Over Voltage
Accept
1PCS
LED Lighting
LEYU
Carton Packing
199*110*50MM
China
8504401990
Product Description

Product Description





Product Parameters

 
SPECIFICATIONS
OUTPUT 
ModelS-150-5S-150-7.5S-150-12S-150-15S-150-24S-150-32
DC Voltage5V7.5V12V15V24V32V
Rated Current25A18A12A9.6A6A4.5A
Current Range0-25A0-18A0-12A0-9.6A0-6A0-4.5A
Rated Power125W135W144W144W144W144W
Ripple & Noise100mVp-p120mVp-p120mVp-p120mVp-p150mVp-p150mVp-p
Voltage Adj. Range±10%-20%;+10%-12%;+10%-12%;+10%-12%;+16%-12%;+16%
Voltage Tolerance±2%±1%±1%±1%±1%±1%
Setup, Rise, Hold Up Time100ms,50ms,20ms at full load
INPUT 
Voltage Range85~132VAC/180~264VAC selected by switch   47~63Hz; 255~370VDC
AC Current3.2A/115V   1.6A/230V
Efficiency78%80.50%80.50%81%83.50%83.50%
Inrush CurrentCold start 35A/230VAC
Leakage Current<3.5mA/240VAC
PROTECTION 
Over Load135%~165%
Protection type: Shut down o/p voltage, re-power on to recover
Over Voltage115%~135%
Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT 
Working Temp., Humidity-10ºC~+60ºC; 20%~90%RH
Storage Temp., Humidity-20ºC~+85ºC; 10%~95%RH
Vibration10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
SAFETY 
Withstand VoltageI/P-O/P: 1.5KVAC   I/P-FG: 1.5KVAC   O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
STANDARD 
Safety StandardDesign refer to UL1012
EMC StandardDesign refer to EN55022,IEC801-2,3,4
OTHERS 
Dimension199*98*38mm(L*W*H)
Weight0.71Kg
Packing30pcs/22.5kg/1.22CUFT
NOTE 
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation







 
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA