SAE J 30 R6/R7 Gasoline, Diesel Hydraulic Machinery Oil Lubricating Oil, E10, E20, E55, E85 Passenger Cars Diesel Vehicles Fuel Line Fuel Hose

 

QDGY fuel hose range is designed for the safe handling of a variety of petroleum-based fuels. Our fuel pipe products are precision engineered to deliver durability through a wide range of operating temperatures. We also offer flexible sizes to suit most medium and heavy-duty applications. Our fuel line hoses are made from premium quality materials ensuring an extended service life. This also enables them to withstand extreme operating temperatures, high vibrations and chemically challenging environments. These fuel hoses are suitable for use for a variety of applications across many of today's major markets.
 

If you look at the side of a fuel hose, you will see the letters "SAE" followed by the number 30 (some will have a J first). Next in the sequence will be the letter "R" followed by a number. The number after the "R" refers to the section of the performance standard it pertains to. The criteria are typically permeation, chemical resistance, construction, temperature range and kink resistance. The higher the standards go, the more criteria that must be met.
"R" numbers in some cases do not determine the pressure rating for the hose. Hose manufacturers typically print on the hose if it is intended for use on fuel injection systems. Also, you should check with the manufacturer of the hose to see if it is compatible with fuels like E85 or biodiesel.

SAE 30R6 hoses are designed for low-pressure applications like carburetors, filler necks and connections between tanks. In most markets, SAE 30R6 has been replaced by SAE 30R7
SAE 30R7 hoses are designed for fuel. These can go under the hood and are typically used for low-pressure applications like carburetors or a fuel return line. It can also be used for PCV connections and emissions devices.
SAE 30R9 hoses are designed for high-pressure applications like fuel injection systems. Often SAE J30R9 is also CARB approved meaning it is EPA certified to a low permeation standard. This means the hose is designed to contain fuel evaporation through the cover.
SAE 30R10 includes hoses that are submerged in fuel. This type of hose is used inside the fuel tank and typically on the fuel pump module. This type of hose uses a special layer on the inside and outside to prevent the core layers from being saturated in fuel. But, don't use it under the hood. R10 hoses can't stand the heat.

 

•- Established in 1998 with a registered capital of  150,0000 dollar .
•-1998-2000 specifically supply hose for domestic, Market Share is more than 30%.
•- 2000-2004 started to export automotive brake hose.
•- 2005 started to products brake hose assembly and fittings.
         Brake hose factory moved to Hebei Province
         The hose factory located in Hebei was certificated ISO9001-2000
         Bought welded steel pipe factory in Qingdao, and began to export steel pipe
         We certificated the Ts16949 quality management system by SGS.
•-2006 Establish the second fitting factory
•-2019  get IATF16949 certificate and  ISO9001:2015 certificate
 
•Employee: Head office:15 staff                           Brake hose assembly factory:60 staff
                   Hose factory: 80 staff                        Fitting factory: 60 staff
                   Steel pipe factory:30 staff
•Capacity:  Brake hose assembly: 1 million pieces/year
                   Brake hose:  2 million meter/year
                   Fitting:2 million meter/year    
                   Steel pipe:  200 ton per year
•Annual sales:  2020 about 6.2 million dollar
                         2021  about 7.5  million dollar
                         2022about 8 million dollar
 

Disc Brake Hydraulic Hose
Brake hydraulic hoses are the flexible hoses that connect the hard lines that run along the body or frame of your vehicle to the brake calipers. Brake hoses are unbique in the fact they are designed and sized properly to move with the suspension as it travels up and down over bumps in the road.
Since brake hoses carry hydraulic fluid as well as transfer pressure to the brake calipers/wheel cylinders it is critical to inspect these hoses regularly for any types of fraying or external cracks. Traditional rubber hoses tend to shrink over time internally restricting the flow of pressure to the brake calipers. Because of this FCP Euro recommends replacing brake hoses in matches pairs to ensure even braking performance at each corner of the axle.

To further improve the factory braking capabilities of the automotive, we created our Unplugged Performance Stainless Steel Sport Brake Line Set. For those who demand higher performance and better brake feel from their automotive, these brake lines are a must! By upgrading to the Stainless Steel Sport Brake Line Set, you'll notice a much firmer, much more responsive brake feel. The more-responsive, more-accurate feel will allow for more sensitive braking adjustments.
Brake line connects hydraulic brake actuator to trailer brakes when used with additional lines, tees, and fittings (sold separately)
Flexible design makes hose perfect for use with foldaway trailer tongues, disc brakes, and torsion axles
Stainless steel flares resist corrosion and are stronger than brass to reduce splitting
Ideal for boat trailers
Deep threads improve connection to help prevent leaks
Rubber hose meets DOT and SAE standards
Fittings on both ends are durable and rust resistant
90-Degree male swivel flare nut is great for applications with limited clearance
Bend in fitting keeps you from having to bend hose
Swivel allows flare fitting to turn without the hose twisting
Female inverted flare (FIF) fitting easily threads onto a male fitting
Double-crimped ferrules securely clamp fittings to hose
Open area on fittings lets you use a line wrench for a better grip
Minimizes the risk of stripping threads

 

Q1: What kinds of main rubber hose can product?
A: Rubber brake hose,EPDM brake hose,Hydraulic brake hose,Hydraulic hose,water hose,fuel& oil hose,Brake hose,Stem hose,SAE J1401 brake hose,DOT 1/8" brake hose,OE No. brake hose,Flexible brake hose,Performance competition brake hose...

Q2: What size of brake hose can you supply?
A: common size: 3.2x10.5mm(1/8");4.8x12.5mm(3/16")
   Special size: 3.2x11mm...or your request size

Q3: Can you print the words(line) as our requirement?
A: Yes,we do provide embossed and printing marking with different color ,as your requirement.

Q4: What kinds of fitting can product?
A: All kinds.Female fitting,male fitting,banjo fitting,adepter brake hose fitting,bolts and nuts,steel with zinc ,chrome,nickle...stainless steel,brass...

Q5: How many types of brake hose do you product?
A: Brake hose,Teflon braided brake hose,PTFE stainless steel braided brake line,Steel tube,Bundy tube,Steel tube assembly,Brake hose assembly, air brake hose, AC hose...

Q6: What is my order's delivery date?
A: It usually takes 5-40 days,which generally depends on your order quantity and our storage.Details information ,kindly please feel free to contact with us, we will reply you within 24 hours.

Q7.Are you a manufacturer or trading company?
We are a professional manufacturer and export by ourselves .