SMC Itvx2030 DC24V High Pressure Electro Pneumatic Regulator

Price $390.00 Compare
Min Order 5 pieces
Shipping From Zhejiang, China
Popularity 354 people viewed
Quantity
+-
 

Ningbo Vpc Pneumatic Co., Ltd.

VIP   Audited Supplier 1 year
Profile Certified by SGS/BV
ITVX2030
Non-Customized
ISO, CE
Vpc Pneumatic
High Temperature
Aluminum
Dco to 5VDC0 to 10V
Air
Source Treatment Unit
O to 50ºC (No Condensation)
3500 Piece/Pieces Per Week
5MPa
Aluminum Alloy + Plastic
0.12A or Less
Itvx2030 Proportional Valve
DC24V10%
0.01 to 3.0MPa
Provided
Provided
VPC Pneumatic
1.Vpc Logo Standard Cartons 2.White Carton Box Wit
2KG
China
Product Description
 
SMC ITVX2030 DC24V  High Pressure Electro Pneumatic Regulator

Product Description


ITVX2000 Series high pressure electro-pneumatic regulator provides step-less air pressure control to an electrical signal. They have an easy-to-read digital pressure display and 3 W or less power consumption. ITVX Series has a 5.0 MPa maximum supply pressure.

Product Feature

Stepless control of air pressure proportional to an electrical signal
Stepless control of air pressure in proportion to electric signals
Sensitivity: 0.2 kPa (100 kPa specification)
Linearity: ±1% or less (F.S.)
Hysteresis: 0.5% or less (F.S.)
Wetted parts: Fluorine grease

 

How to Order

Itvx2000 Series High Pressure Electro Pneumatic Regulator

Itvx2000 Series High Pressure Electro Pneumatic Regulator

Product Specification

ModelITVX2000
Min. supply pressureWhichever is higher: 0.5 MPa or the set pressure +0.2 MPa
Max. supply pressure5MPa*2)
Set pressure range*3)0.01 to 3.0MPa
Power supplyVoltageDC24V±10%
Current consumption0.12A or less
Input signalCurrent type*4)DC4 to 20mA, DC0 to 20mA (Sink type)
Voltage typeDC0 to 5V, DC0 to 10V
Input impedanceCurrent type500Ω or less
Voltage type6 to 6.5 kΩ(at ordinary temperature)

Output signal*5) 

(Monitor output)

Analog output

DC1 to 5 V (Output impedance: Approx. 1 kΩ) 

Output accuracy: ±6% or less (Full span)

DC4 to 20 mA (Sink type) Load impedance: 250Ω or less

Output accuracy: ±6% or less (Full span)

Switch output

NPN open collector output: Max. 30 V, 80 mA

Hysteresis: ±3% (Full span), Self-diagnosis: ±5% or less (Full span)

PNP open collector output: Max. 80 mA

Hysteresis: ±3% (Full span), Self-diagnosis: ±5% or less (Full span)

Linearity±1% or less (Full span)
Hysteresis1% or less (Full span)
Repeatability±1% or less (Full span)
Sensitivity±1% or less (Full span)
Temperature characteristics±0.12% or less (Full span)/ºC
Output pressure displayAccuracy±2% or less (Full span) ±1 digit
Min. unit *6)MPa: 0.01, kgf/cm²: 0.1, bar: 0.1, psi: 1
Working mediumAir, N2, O2, Ar
Working temperature0 to 50ºC (No condensation)
WeightApprox.570g (Without options)
*1) Characteristics shown above are based on the piping conditions of Fig. 1.
Itvx2000 Series High Pressure Electro Pneumatic Regulator
 
*2) When oxygen is used as a fluid, the maximum supply pressure must be less than 1 MPa.
*3) Refer to Fig. 2 for the relationship between set pressure and input signal.
*4) 2-wire type DC4 to 20 mA is not available. Power supply voltage DC24 V is required.
*5) Select either analog output or switch output. Further, when switch output is selected, select either NPN output or PNP output.
When measuring analog output of DC1 to 5 V with a load impedance less than 100 k, the analog output may not obtain the output accuracy of ±6% or less (F.S.).
*6) Adjustment of numerical values such as the zero/span adjustment is set based on the minimum units for output pressure display.
Note that the unit cannot be changed.
*7) This product is only for blowing gas. This product does not have sufficient pressure control for applications other than blowing (driving, sealing, etc.).

 
ITVX2000
Itvx2000 Series High Pressure Electro Pneumatic Regulator
Option/Accessory Type
DescriptionPart No.
Flat bracket assembly (including mounting screws)P398020-600
L-bracket assembly (including mounting screws)P398020-601
Power cable connectorStraight type 3 mP398020-500-3
Right angle type 3 mP398020-501-3
 
Itvx2000 Series High Pressure Electro Pneumatic Regulator
 
 
 
 

Main Dimensions

Itvx2000 Series High Pressure Electro Pneumatic Regulator
Itvx2000 Series High Pressure Electro Pneumatic Regulator
Wiring

Caution
Connect the cable to the connector on the body with the wiring arranged as shown below.
Proceed carefully,as incorrect wiring can cause damage.
Further, use DC power with sufficient capacity and a low ripple.
 
Itvx2000 Series High Pressure Electro Pneumatic Regulator
 
Note) The cable is also available in a right angle type. A right angle type connector is attached facing left (toward the SUP port). Do not attempt to rotate, as the connector does not turn.

F.G. (Grounding)

Ground the frame ground (F.G.) terminal at the front of the main  body. If the F.G. terminal port is not used, this product may not  operate properly due to the noise.

Itvx2000 Series High Pressure Electro Pneumatic Regulator
Current Signal Type/Voltage Signal Type
 
1BrownPower supply
2WhiteInput signal
3BlueGND (COMMON)
4BlackMonitor output
Itvx2000 Series High Pressure Electro Pneumatic Regulator

Monitor output wiring diagram

 
 
Itvx2000 Series High Pressure Electro Pneumatic Regulator

Product Category

Itvx2000 Series High Pressure Electro Pneumatic Regulator

Packaging & Shipping

Packaging type: 

VPC BoxWhite BoxColor BoxVPC CartonPallet

Delivery time:

Conventional ProductsCustomized ProductsSpecially Customized Products
on the day of payment10 workdays 25 workdays

Payment term:

PaypalTTWestern UnionDPLCMoney GramOnline BankPay laterDA
YESYESYESNONOYESYESYES

        YES           

Transportation:

Express (DHL, UPS, TNT, JCEX, FEDEX) is available.

Sea and Air transports are available.

The most suitable transport way will be chosen for you.

FAQ

Q1: What is your quality assurance?
A: We will inspect one by one before delivery.If the product is damaged in transit or has quality problems, you can choose to refund or resend the product, and the freight will be borne by us.

Q2: What is your terms of payment?
A: TT, we'll show you the photos of the products and packages before you pay the balance.
B: Paypal payment, Bank transfer order also available.

Q3: How about the lead time?
A: Normally it will take 3-7 days for our routine products.

Q4: What is your sample policy?
A: Some free samples can be offered if you contact us.

Q5: How about the warranty?
A: 1 year warranty.
 

 
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA