Audited Supplier
The VBAT series tanks are designed to directly mate with VBA boosters to add a reservoir of higher pressure air to the system. With such a reservoir of high pressure air, the booster is able to charge the system during periods of low demand. Available in carbon or stainless steel, the tanks are available in four sizes from 5 to 38 liters in capacity. Models are available to meet various regional pressure vessel regulations.
Product Feature
The VBAT-Q tanks are CE certified for use in Europe and other countries that require compliance wtih the European Pressure Equipment Directive (PED).
1. Compact connections are possible with booster regulators.
2. Easy installation.
3. Low heat generation. Very little heat is generated because no electricity is used, and there is impact on cylibders, solenoid valves, etc.
4. It can be used alone as a tank.
5. Also partially compatible with overseas standards.
| Model | VBAT05A_-SV-Q | VBAT10A_-SV-Q | VBAT20A_-RV-Q | VBAT38A_-RV-Q |
| Working medium | Compressor air | |||
| Tank capacity | 5 L | 10 L | 20 L | 38 L |
| Max. operating pressure | 2.0 MPa | 1.0 MPa | ||
| IN port size | 3/8 | 1/2 | 3/4 | |
| OUT port size | 3/8 | 1/2 | 1/2 | 3/4 |
| Proof pressure | 3.3 MPa | 1.6 MPa | ||
| Working temperature | 0 to 75 ºC | |||
| Installation | Horizontal (Floor mounting) | |||
| Weight | 6.6 Kg | 10 Kg | 14 Kg | 21 Kg |
| Meterial | Carbon steel (SS400) | |||
| Paint | Outside: Silver paint, Inside: Rustproof paint | |||
*1) Accessories are included in the same container.
*2) Scratches, scrapes, blotches, and uneven color maybe present on the surface, but they do not affect the function or performance of the product.
Accessories/Port No.
| Model | VBAT05A_-SV-Q | VBAT10A_-SV-Q | VBAT20A_-RV-Q | VBAT38A_-RV-Q |
| Accessory kit | VBAT5A-Y-2 | VBAT10A-Y-2 | VBAT20A-Y-2 | |
| Safty valve | VBAT-S (Set pressure: 2 MPa) | VBAT-R (Set pressure: 1 MPa) | ||
| Drain valve | VBAT-V1 | |||
The Accessory Kit is a Set of Nos. 1 to 5.
| No. | Model | VBAT5A-Y-2 | VBAT10A-Y-2 | VBAT20A-Y-2 |
| Description | Quantity | |||
| 1 | Busging assembly (with O-ring) | 1 | 1 | 1 |
| 2 | Hexagon socket head taper screwed plug (for drain port) | 1 | 1 | 1 |
| 3 | Hexagon socket head cap screw | 4 | 4 (VBA1_A) 4 (VBA2_A) | 4 |
| 4 | Anchor bolt/nut | - | - | 4 |
| 5 | Hexagon socket head taper screwed plug (for safety valve port) | 1 | 1 | 1 |
* When used as a single unit (not connected with a booster regulator) and pressurized at over 1 MPa at normal temperatures.
*1) The length may be longer than the specification if the plugs mounted on the tank are not fit to the end.
*2) The plug in the spare port has been firmly secured with adhesive. When removing the plug to use the port, be careful so as not to damage the plug.
*1) The length may be longer than the specification if the plugs mounted on the tank are not fit to the end.
*2) The plug in the spare port has been firmly secured with adhesive. When removing the plug to use the port, be careful so as not to damage the plug.
*1) The length may be longer than the specification if the plugs mounted on the tank are not fit to the end.
*2) The plug in the spare port has been firmly secured with adhesive. When removing the plug to use the port, be careful so as not to damage the plug.
(mm)
| Booster regulator mode | A | B | C | D* |
| VBA20A | 481 | 394 | Rc3/8 | - |
| VBA40A | 520 | 429.8 | Rc1/2 | - |
| VBA22A | 444 | 394 | Rc3/8 | 469 |
| VBA42A | 477 | 429.8 | Rc1/2 | 493 |
*1) The length may be longer than the specification if the plugs mounted on the tank are not fit to the end.
*2) The plug in the spare port has been firmly secured with adhesive. When removing the plug to use the port, be careful so as not to damage the plug.
(mm)
| Booster regulator mode | A | B | C | D* |
| VBA20A | 531 | 444 | Rc3/8 | - |
| VBA40A | 570 | 479.8 | Rc1/2 | - |
| VBA22A | 494 | 444 | Rc3/8 | 519 |
| VBA42A | 527 | 479.8 | Rc1/2 | 543 |
Packaging type:
| VPC Box | White Box | Color Box | VPC Carton | Pallet |
Delivery time:
| conventional products | customized products | specially customized products |
| on the day of payment | 10 workdays | 25 workdays. |
Payment term:
| Paypal | TT | Western Union | DP | LC | Money Gram | Online Bank | Pay later | DA |
| YES | YES | YES | NO | NO | YES | YES | YES | YES |
Transportation:
Express(DHL, UPS, TNT, JCEX, FEDEX) is available.
Sea and Air transports are available.
The most suitable means of transport will be chosen for you.
Q1: What is your quality assurance?
A: We will inspect them one by one before delivery. If the product is damaged in transit or has quality problems, you can choose to refund or resend the product, and the freight will be borne by us.
Q2: What are your terms of payment?
A: TT, we'll show you the photos of the products and packages before you pay the balance.
B: Paypal payment, Bank transfer, and Trade Assurance orders are also available.
Q3: How about the lead time?
A: Normally it will take 3-7 days for our routine products.
Q4: What is your sample policy?
A: Some free samples can be offered if you contact us.
Q5: How about the warranty?
A: 1 year warranty.
