Audited Supplier
sanitary pneumatic( manual ) safety / relief valve
HS Code:84818010
TECHNICAL PARAMETER:
Application:
The valves are used in automation and control systems to control the pressure, flow, level, temperature and the tank level.
Working principle:
This series safety valve is to adjust the spring compression nut to calibrate a particular pressure. The calibration of pressure is to fix the maximum pressure to avoid equipment damage. In the normal working operating pressure, the valve is closed; when the system pressure exceeds the calibrated pressure, the valve is closed; when the system pressure exceeds the calibrated pressure, the valve is open. The pressure in the piping system being released, to protect the pipe system and the equipment. The valve is with start the open device for the CIP cleaning of the safety valve and the piping.
The safety valve is a special valve through a rigorous calibration, but to make the valve more realistic operating conditions, so the conditions should be as much as possible the scene of the valve and then parity.
Advantages :
with simple structure, good shape, fast to adjust the pressure, easy to maintenance
Pressure control is adjustable and can be adjusted in the safety range.
The valve body made of stainless steel can bear acid, the surface is bright and clean, the sealing made of food rubber, comply with the sanitary regulations.
When installed, we can not reverse the flow of fluid input.
Material:
material contact Steel parts: Stainless 304\316L
valve core seal selection:a)soft seal: EPDM. (standard)
SILICON, FDM, HNBR(CHOOSE).
b)metal seal
Data:
working pressure:≤6bar
pressure control range :0.5~6bar
Normal diameter: DN25~DN50
sealing: food rubber
medium temperature:-10ºC~+120ºC
medium: liquid material, gas
Advantages:
Sealings: Excellent acid-proof, alkali proof and high-temperature performance. a little degree of permanent compression deforms. Investment forging valve plug: Pressure durability less than 1.2MPA, metallographic structure better than casting ones.Apparent design: Keep updated with international fashion style. Cost performance: Impor substituted, cost saved and reiableoperation.
Connection types:
- Welded.ClampedScrew or threaded welded - srewFlange
To assure the connection and substitution with imported facilities, all the connection styles withe pipe or equipment are made to DN11850, IDF / ISO, SMS 3A international standard size.
Size:
- DIN: DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN1003A: 3/4", 1", 1 1/2", 2", 2 1/2", 3", 4"SMS: 19, 25, 32, 38, 51, 63, 76, 89, 102 ISO: ?19, ?25, ?32, ?38, ?51, ?63, ?76, ?89, ?102,
Surface treatment
surface treatment: sandblasting Ra≤1.6um
cast sub-light Ra≤0.6um
inside surface treatment: polishing Ra≤0.6um
Operation Type:
- Manual: lever or duck-filled pneumatic actuator: stainless steel or plastic with control box or not.Electric actuator: single action or double action
Features of Pneumatic actuator:
- Normally opened: the spring is OPEN and pneumatic OFFNormally closed: the spring is OFF and pneumatic OPENWith signal feedback inductive provider/sensor for optionCompact appearance, small volume, large tongue simple and convenient assembly
Technical Parameter:
- OD Range: DN25~ DN200, 1"~ 8"Anti-pressure: 10BarCompressed Air supply: MIN:4 BAR, MAX:8BARPneumatic Actuator torque: 40NmFinishing degree:
Cutting: Ra1.5 ~ 3.2um
Polish: Ra0.4~ 0.8um
Specifications of Sanitary Safety/relief Valve:
1.Diameter of the valve:
a) YAK Castleman Safety valve:
b) YAP common safety valve:
