Audited Supplier
TY15102602
Forever
One Year
10-30m
<50 L/min
Magnetic
Single-Stage Pump
Middle Pressure Pump
Single Suction Pump
Horizontal Pump
Horizontal Split Pumps
Suction Centrifugal
Semi-Open
Pumps
Blue
Neutral Packing
Pumtip
Carton Package
CE
Ningbo China
Product Description
Sealless Acid Chemical Circulation Magnetic Drive Chemical Pump
Product features
Magnetic drive, no shaft seal design, will not cause chemical liquid leakage easily.
Using FRPP and PVDF material injection molding, is suitable for most chemical acid alkali conveyer.
Optional interface, thread and hose interface, pump shaft with silicon carbide and ceramic material is optional, places to meet different requirements.
Techinical Parameter
1, MP (MD), MP (MD) - F series magnetic pump structure compact, absolute leakproof, widely used in various industry, its corrosion resistance and durability and get the praise of users.Main material use manufactured from GFRPP, PVDF, can be used to transport a variety of corrosive liquids.MP (MD), MP (MD) - F series because of its structure is compact, very suitable for used as photographic flushing, plating equipment, PCD liquid circulation.
2, MP (MD), MP (MD) - F series pump maximum flow from 5 to 220 liters per minute, a hose interface and the selection of screw thread interface MP (MD), MP (MD) - F series pump is suitable for acid broken liquid transportation, according to the proportion of liquid and choose a different page wheel, can transport a variety of high proportion of liquid without load.
3, MP (MD), MP (MD) - F series magnetic pump is an attached pages magnet driven wheel and motor axis, unlike traditional centrifugal pump in the structure, without shaft seal.The pump chamber separated by a shell after motor with active magnetic rotation.Republic of active and passive magnetic torque page wheel rotates, so as to realize the liquid transportation.
4, MP (MD) series pump is simple, solid, durable do one of the best magnetic drive pump.
1), motor for solid totally enclosed fan cooled structure, and is a double layer of epoxy coating.
2) MP (MD) series pump and axis of ceramic and ceramic thrust washers, makes the comparison with the same products, run more smoothly and to increase its durability.
3), the pump is no shaft seal design, can supply the material has FRPP, PVDF, CFRPP.
4), the pump can supply of sealing material is VITON, NBR and EPDM.
5), the potion of delivery will not be in contact with the metal parts.
Company Information:
NINGBO ONEREEL MACHINE CO., LTD.Business Type :Manufacturer.
Product Range :Pumps and other Mechanical and electrical rquipment.Products Service:Water pumps, Gas pumps, Vertical multistage cemtrifugal pumps,chemical pumps
Year Established :2011.
Certificate :GS , CE , GB , ISO14001 , CCC.
Company Address :No.1229 Baoshan Road, Daqi, Beilun, Ningbo 315800 China, Ningbo, Zhejiang, China. 
Packaging & Transportation
Authoritative Certificate
Product features
Magnetic drive, no shaft seal design, will not cause chemical liquid leakage easily.
Using FRPP and PVDF material injection molding, is suitable for most chemical acid alkali conveyer.
Optional interface, thread and hose interface, pump shaft with silicon carbide and ceramic material is optional, places to meet different requirements.
Techinical Parameter
| Model | Voltage | Inlet | Flow rate | Lift | Power |
| V | mm | L/min | m | w | |
| MD-6 | 220 | 14 | 8 | 1 | 6 |
| MD-10 | 220 | 14 | 11 | 1.5 | 6 |
| MD-15R | 220 | 14 | 16 | 2.4 | 10 |
| MD-20R | 220 | 18 | 27 | 3.1 | 20 |
| MD-30R | 220 | 20 | 32 | 3.8 | 45 |
| MD-40R | 220 | 20 | 45 | 4.6 | 65 |
| MD-55R | 220 | 26 | 60 | 5.6 | 90 |
| MD-70R | 220/380 | 26 | 86 | 6.7 | 150 |
| MD-100R | 220/380 | 26 | 120 | 8.6 | 260 |
| MD-120R | 220/380 | 40 | 150 | 8.5 | 370 |
| MX-400 | 380 | 40 | 100 | 10.5 | 400 |
| MX-401 | 380 | 40 | 150 | 14.5 | 750 |
| MX-402 | 380 | 50/40 | 200 | 20 | 1500 |
| MX-403 | 380 | 50/40 | 250 | 23 | 2200 |
1, MP (MD), MP (MD) - F series magnetic pump structure compact, absolute leakproof, widely used in various industry, its corrosion resistance and durability and get the praise of users.Main material use manufactured from GFRPP, PVDF, can be used to transport a variety of corrosive liquids.MP (MD), MP (MD) - F series because of its structure is compact, very suitable for used as photographic flushing, plating equipment, PCD liquid circulation.
2, MP (MD), MP (MD) - F series pump maximum flow from 5 to 220 liters per minute, a hose interface and the selection of screw thread interface MP (MD), MP (MD) - F series pump is suitable for acid broken liquid transportation, according to the proportion of liquid and choose a different page wheel, can transport a variety of high proportion of liquid without load.
3, MP (MD), MP (MD) - F series magnetic pump is an attached pages magnet driven wheel and motor axis, unlike traditional centrifugal pump in the structure, without shaft seal.The pump chamber separated by a shell after motor with active magnetic rotation.Republic of active and passive magnetic torque page wheel rotates, so as to realize the liquid transportation.
4, MP (MD) series pump is simple, solid, durable do one of the best magnetic drive pump.
1), motor for solid totally enclosed fan cooled structure, and is a double layer of epoxy coating.
2) MP (MD) series pump and axis of ceramic and ceramic thrust washers, makes the comparison with the same products, run more smoothly and to increase its durability.
3), the pump is no shaft seal design, can supply the material has FRPP, PVDF, CFRPP.
4), the pump can supply of sealing material is VITON, NBR and EPDM.
5), the potion of delivery will not be in contact with the metal parts.
Company Information:
NINGBO ONEREEL MACHINE CO., LTD.Business Type :Manufacturer.
Product Range :Pumps and other Mechanical and electrical rquipment.Products Service:Water pumps, Gas pumps, Vertical multistage cemtrifugal pumps,chemical pumps
Year Established :2011.
Certificate :GS , CE , GB , ISO14001 , CCC.
Company Address :No.1229 Baoshan Road, Daqi, Beilun, Ningbo 315800 China, Ningbo, Zhejiang, China.
ONEREEL is specialized in the design and manufacture Steel Spools, Plastic Spools, Cable roller, Yarn Bobbin, aluminum spool , Cable Reel Stand, Sheave Pulley, Cable Conveyor, Hydraulic Puller Tensioner, Gin Poles, Cable Pulling Winch, Safety Tools, Wire Grip, Plastic Parts, and Pump in the industry since 1991. All of our customer spool and wire carrier are engineered and manufactured in our 120,000 square foot state-of-the-art manufacturing plant located in Ningbo, Zhejiang.
ONEREEL is specialized in the manufacture of reels for cables and electric wires, iron axles, disc spool for steel cables and various delivery reels. With strong technological capabilities and full series of production equipment. All of our products go through the dynamic and static balance tests. We have passed the quality system certification ISO9001:2000 to ensure the product quality. Following the standards of GB4004-83, JB/T8997, DIN46395 and DIN46397 in productions.
Hot Product
Our Customer
Packaging & Transportation
Authoritative Certificate
FAQ
Q1: Can I get samples?
A: According to spool model and material, we will advise.
Q2: How long is the sample LEAD TIME?
A: For existing samples, it takes 2-3 days. If no stock, we will advise lead time.
Q3: Can you develop new products?
A: Yes, we have new products developing ability and we are good at developing new mold.
Q4: How much is the freight charge?
A: It depends on spool package volume, if small quantity, volume and urgent goods,
we may advise FEDEX or other couriers' charge for your check.
If volume bigger and by seaway suitable, we provide FOB or CIF price to you.
Q5: What format of the file do you need if I want my own design?
A: We have our own mound workshop and can provide spool or other plastic product developing and injection service.
Q6: How about your service?
A: We have pre-sale service, in-sale service and after-sale service. As "Customer First" is the most important principle of company operation.
A: According to spool model and material, we will advise.
Q2: How long is the sample LEAD TIME?
A: For existing samples, it takes 2-3 days. If no stock, we will advise lead time.
Q3: Can you develop new products?
A: Yes, we have new products developing ability and we are good at developing new mold.
Q4: How much is the freight charge?
A: It depends on spool package volume, if small quantity, volume and urgent goods,
we may advise FEDEX or other couriers' charge for your check.
If volume bigger and by seaway suitable, we provide FOB or CIF price to you.
Q5: What format of the file do you need if I want my own design?
A: We have our own mound workshop and can provide spool or other plastic product developing and injection service.
Q6: How about your service?
A: We have pre-sale service, in-sale service and after-sale service. As "Customer First" is the most important principle of company operation.
