Audited Supplier
WXC80BA
PLC
Customized
New
Semi-Automatic
CE, ISO9001
Special Casting
RW
Seaworthy Package
weight: 5.4T
Shandong, China
84581900
Product Description
General Introduction
The WXC series peeling machine are special high-efficiency lathes for roughing and finishing the outer circumference of round bars/ pipes and wire rods. It removes decarburized layers, cracks and other crackers on the surface of the bars quickly and with high precision.
he models in the parameter table can be made into common types (Type B, Type C), small (CA) type and numerical control (S) type.
Strengths & Merits
1. It can process extra long rods, pipes and wires, including coil to coil, and coil to bars.
2. High efficiency: multiple blades simultaneously operate: its work efficiency is several times higher than conventional lathe.
3. High precision: diameter tolerance of finished products ≤h9, surface roughness ≤6.3 μm
4. Non-pollution: disposals can be recycled.
Composition Introduction
Parameter table
Clients Visit to Our Factory
The WXC series peeling machine are special high-efficiency lathes for roughing and finishing the outer circumference of round bars/ pipes and wire rods. It removes decarburized layers, cracks and other crackers on the surface of the bars quickly and with high precision.
he models in the parameter table can be made into common types (Type B, Type C), small (CA) type and numerical control (S) type.
| Model | Input Dia | Length | Feeding Speed | Cutting Depth | Surface Roughness | Dia.Tolerance | Spindle Motor | Total Capacity |
| WXC20 | ф5-ф20mm | ≥1400mm | 1-25m/min | 0.5-2mm | Ra≤3.2 | IT9 | 22KW | 30KW |
| WXC40 | ф5.5-ф40mm | ≥1400mm | 1-15m/min | 0.5-2mm | Ra≤3.2 | IT9 | 45KW | 63KW |
| WXC60 | ф13-ф75mm | ≥2000mm | 1-15m/min | 0.5-2mm | Ra≤3.2 | IT9 | 45KW | 63KW |
| WXC80 | ф16-ф85mm | ≥2200mm | 1-12m/min | 0.5-3mm | Ra≤3.2 | IT9 | 55KW/75KW | 75KW/90KW |
| WXC100 | ф25-ф110mm | ≥2800mm | 0.5-10m/min | 1-4mm | Ra≤3.2 | IT9 | 75KW | 95KW |
| WXC130 | ф35-ф135mm | ≥3000mm | 0.3-6m/min | 1-5mm | Ra≤3.2 | IT9 | 90KW | 120KW |
| WXC160 | ф45-ф170mm | ≥3500mm | 0.3-5m/min | 1-5mm | Ra≤3.2 | IT9 | 110KW | 140KW |
| WXC200 | ф70-ф210mm | ≥4000mm | 0.3-4m/min | 1-5mm | Ra≤3.2 | IT9 | 132KW | 165KW |
| WXC250 | ф95-ф260mm | ≥4000mm | 0.2-2.5m/min | 1-5mm | Ra≤3.2 | IT9 | 160KW | 210KW |
| WXC350 | ф150-ф360mm | ≥4500mm | 0.1-2m/min | 1-10mm | Ra≤3.2 | IT9 | 200KW | 265KW |
| WXC400 | ф205-ф410mm | ≥4800mm | 0.1-2m/min | 1-10mm | Ra≤3.2 | IT9 | 250KW | 345KW |
| WXC500 | ф315-ф510mm | ≥5000mm | 0.1-1.5m/min | 1-10mm | Ra≤3.2 | IT9 | 315KW | 415KW |
Strengths & Merits
1. It can process extra long rods, pipes and wires, including coil to coil, and coil to bars.
2. High efficiency: multiple blades simultaneously operate: its work efficiency is several times higher than conventional lathe.
3. High precision: diameter tolerance of finished products ≤h9, surface roughness ≤6.3 μm
4. Non-pollution: disposals can be recycled.
Composition Introduction
Parameter table
| Model | WXC80BA | |
| Workpiece Required | Daimater range(mm) | Φ13~ Φ80X2200~unlimited |
| Tensile strength σb(Mpa) | ≤1100 | |
| Surface hardness | ≤HB320 | |
| Bending(mm/m) | ≤2 | |
| Diameter tolerance | As per GB 702- second group | |
| Roundness | ≤diameter tolerance 50% | |
| Surface roughness(Ra) | ≤25~50mm | |
| Finished Products | Diameter range(mm) | Φ12~Φ78 |
| Radius cutting depth(mm) | 0.25~1.50 | |
| Diameter tolerance | ≤IT9(standard diameter tolerance) | |
| Surface roughness (Ra) | ≤6.3μm | |
| Roundness (mm) | ≤0.05 | |
| Feeding speed (infinitely adjust speed m/min) | 2.0~15.0(Slow down for materials with ceaseless chips, high strength and high hardness.) | |
| Cutter head rotating speed (infinitely variable speed) (r/min) | 200~2200 | |
| Main motor power (kW) | 55(4 ) | |
| Feeding motor power (kW) | 5.5 (4 electrodes) | |
| Clamping vehicle motor (kW) | 3.7 (servo) | |
| Dimensions (m) (reference) | Host machine 3.2X2X2.1 | |
| Weight (t) (reference) | Host machine 5.4 | |
| Total capacity (kW) | 75 | |
| Source of compressed air (prepared by user) | 0.4~0.8MPa, 2m3/min, with second grade oil and water separator | |
Clients Visit to Our Factory
