Audited Supplier
The working principle of the negative pressure three-station thermoforming machine is mainly divided into the following steps:
Heating: Place the plastic film or sheet in the heating frame and heat it by electric heating or infrared radiation to make its temperature reach the state of plastic softening.
Molding: The heated softened plastic is transferred to the molding station, where a mold is provided. Suction is generated by negative pressure to fit the plastic tightly to the mold surface. At this time, the plastic is stretched and formed under the action of negative pressure to form the desired product shape.
Cooling and demolding: After the molding is completed, the plastic cools and solidifies. The cooling process can be cooled by air or water. At the same time, the negative pressure is released, and after demolding is completed, the formed product can be taken out.The negative pressure three-station thermoforming machine usually has three different stations, each of which is used for heating, forming, and cooling, thus achieving efficient production.
| THREE-STATION NEGATIVE PRESSURE THERMOFORMING MACHINE | |
| Model | SEZW-900*720 / 700*720 |
| Maximum Forming Area | 900 X 720 mm |
| Closing Stroke | 150 mm |
| Running Speed | 40 Cycles / Min |
| Sheet Thickness | 0.12~2 mm |
| Cutting Force | 800 KN |
| Heating Brick | Trimble / Elstein (HTS) |
| Heating Power | 58.5 kw 2-Section Heating |
| Installed Power | 84 kw |
| Axle Pin And Sleeve Material | Bearing Steel / Copper |
| Control System | PLC DELTA / YASKAWA |
| Servo Motor | DELTA / YASKAWA |
| Main Solenoid Valve | SMC / MAC |
| Maximum Sheet Width | 750 mm |
| Thermostat | Azbil |
| Minimum Energy Consumption | 25 kw / h |
| Reducer Type | Planetary Reducer |
| Equipment Size | 11 m X 2.3 m X 2.4 m |
| The Actual Parameters After Receiving The Goods Shall Prevail | |
Automated machines ensure consistent and precise forming of plastic products, reducing the risk of human error and variability in the final product. This helps maintain high-quality standards and uniformity across the production line.
Full automatic three-station vacuum forming machines are versatile and can be used to produce a wide range of plastic products with different shapes, sizes, and complexities. This flexibility makes them suitable for various industries and applications.
Automated machines enhance workplace safety by reducing manual handling of materials and minimizing the risk of injuries associated with repetitive tasks. Operators can also benefit from a more comfortable working environment with less physical strain.
Three-station vacuum-forming machines can significantly speed up the production cycle by allowing multiple operations to be carried out simultaneously. This leads to quicker turnaround times and increased output capacity.
Full automatic machines eliminate the need for manual operation, resulting in higher productivity and efficiency in the production process. The three-station design allows for continuous production without the need for frequent operator intervention.
Q1: Are you a factory or trading company?
A1: We are a factory.
Q2: How much production capacity does your company one year?
A2: This depends on your needs.
Q3: Can we visit your machine operation in your factory?
A3: We have our own plastic products company, you can see all the machines operating.
Q4: What's the warranty on your machines?
A4:12 month Warranty, Life-long technical support
Q5: How do you help with the installation?
A5: The engineer is available to serve overseas if needed. it is easy for customers to install through video calling. What's more, we have video tutorials for customers.
Q6: Can we test our own material with your machine before ordering?
A6: Yes, please contact us to send your material. We will test it and send you a video.
