Shimi DC238t High Pressure Cast Cold Chamber Die Casting Machine for Aluminum Magnesium Copper Die Casting

Price $42525.00 Compare
Min Order 1 Piece
Shipping From Guangdong, China
Popularity 375 people viewed
Quantity
+-
 

Guangdong Shimi Intelligent Equipment Co., Ltd

VIP   Audited Supplier 1 year
Profile Certified by SGS/BV
DC238T
Provided
One Year
Cold Chamber Die Casting Machine
Horizontal
2380kN
820*820mm
530*530mm
1.42~2.8kg
145~620cm²
SHIMI
Wooden / Iron Pallet
DC238T
China
84543010
Product Description
GUANGDONG SHIMI INTELLIGENT EQUIPMENT CO.,LTD


ShiMi DC238T High Pressure Cast Cold Chamber Die Casting Machine for Aluminum Magnesium Copper Die Casting
Clamping system
Four large bar guide pillars, using high-tensile steel as raw materials, the surface is hardened by high-frequency heat treatment, and the outer layer is re-plated with hard chrome, which has high wear resistance and prolongs the service life of the machinery.
The three major formwork and machine hinges are made of high-strength ductile iron and double-toggle connecting rod five-point expansion structure to provide strong clamping force.
The clamping action is divided into multi-level pressure and speed control and low-pressure clamping protection function.
Double-cylinder hydraulic ejection design provides balanced ejection force and reduces the factors of product ejection deformation.
Adopt central electric lubrication system, advanced point-by-point quantitative lubrication. Ensure that the lubrication points near and far are evenly lubricated, and there are liquid level and pressure alarm functions to ensure the good lubrication effect of the machine.
The fixed plate and moving plate are equipped with mold cooling water contacts, which are convenient for installation and operation.

 

 

Hydraulic System
Adopt fast differential regeneration clamping oil circuit system, the opening and clamping action runs smoothly and quickly, and improves production efficiency.
Equipped with abundant hydraulic core-pulling groups, 1 group of hydraulic core-pulling valve shaping plate and 1 group of moving plate are standard; 2 sets of shaping plates and moving plates can be selected each.
There is a set of fixed molds and moving molds, which are designed for molds with special requirements to improve the air tightness and strength of die castings.
Double-cylinder hydraulic ejection design provides balanced ejection force and reduces the factors of product ejection deformation.
Use reliable brand hydraulic components (Tokyo, Yuken, etc.).

Dual-proportional control hydraulic power system

Dual-proportional control of the hydraulic system, intelligent dynamic operation, clear high-pressure throttling, reduce oil temperature.
Dual proportional control hydraulic system, pressure and speed can be adjusted.
Improve the stability of the whole machine and ensure the product quality.
Flexible and smooth action conversion, reduce the impact of action, and prolong the service life of machinery and molds.
 
 

Electrical control systems

Siemens control system and Siemens touch screen, easy to control, rich function pages, to meet the control of die-casting process.
Powerful parameter storage function, up to 60 sets of mold parameters can be stored, which is convenient for future production call, improves production efficiency, and maintains consistent product quality.
The fuselage line is made of oil-resistant and temperature-resistant and outer steel wire protection wire. Even in harsh environments, it is well protected to ensure normal production.
The line connecting the fuselage and the main control box adopts aviation plug, which is safe and reliable, and easy to maintain.



Injection system
Two independent high-speed and booster accumulators are adopted, each with sufficient storage capacity, and the high-speed and pressurization do not affect each other to ensure stable injection force.
The slow injection is controlled by an electric proportional valve, which is sensitive and stable.
The injection action is controlled by multi-stage speed, which is suitable for various mold product process requirements.
Wide injection speed adjustment range, slow injection speed 0.1-1.4m/s.
High-speed injection: The maximum air injection speed >= 8.5m/s. Guarantee of high-quality castings.
Active check pressurization system: short pressure construction time, small pressure impact, high repeatability. It is suitable for the production of high-density castings.
Built-in pressurized piston structure improves action response, improves the integrity of the injection system, and reduces oil leakage points.
ulti-injection position lifting, suitable for the production of molds with different structures.


 


DC238T Configuration 
  1. Servo drive hydraulic system: 30%-60% power saving than conventional motor, production speed is about 20% higher than conventional machine, and the pressure is more stable. 
  2. Double proportional control hydraulic system: Double proportional control hydraulic system, pressure and speed can be adjusted.
  3. Siemens control system
  4. Contactless switch for injection stroke.
  5. Quick clamping function.
  6. Core pull configuration.
  7. Injection pressurization.
  8. Lifting of the injection table.
  9. Machine hinge lubrication device.
Hydraulic Brand List
  1. Siemens PLC Controller
  2. Siemens  7" or 10" touch screen
  3. Air Switch, button Switch and AC Contactor are Schneid
  4. Hydraulic Valves are Yukan Japan
  5. Servo Motor: Modrol, China
  6. Servo Pump: Sumitomo, Japan
  7. Lubricate oil pump: Herg, Sino-Japanese joint venture

Technical Parameters 
 
ITEMUNITDC 238T
Clamp ForeKN2380
Clamping strokeMM400
Ejecting ForceKN170
Ejection StrokeMM100
Mold thicknessMM220-670
Platen Size (w*h)MM820*820
Diameter of die barMM100
Tie bar spacing(w*h)MM530*530
Force of shotKN300
Stroke of shot MM390
Plunger diameterMM50-60-70
Shot Weight/AlKG1.42/2.2/2.8
Shot Weight/MgKG0.94/1.47/1.78
Casting Pressure (Intensify)Mpa148/104/75
Casting areaCM2145/210/284
Max Casting areaCM2620
Injection PositionMM0, - 140
Launch distance of shot headMM140
Shot chamber flange diameterMM110
Shot flange protruding plate heightMM10
Power of MotorKW15
System working pressureMPa14
Oil Tank VolumeL600
Weight of MachineKG8500
Size of MachineM5.6*1.3*2.6

Packing and Delivery 


Each of our machines has a final test time over 72 hours before leaving the factory
Ensure that every detail is done to the extreme
On the premise of ensuring the stability and durability of the machine
Create more efficient and energy-saving products

Products Application 

ShiMi die casting machines are widely used to automobile parts, lighting, motor, sport equipment, electric tools, home appliances, bicycles, gas applicances,etc.


Company Profile


Guangdong Shimi Intelligent Equipment Co., Ltd. is a manufacturing enterprise specializing in R&D, manufacturing, sales and export of cold / hot chamber die-casting machine, vertical die-casting machines and aluminum, magnesium, copper, lead, zinc alloy die-casting machines and semi-solid die-casting machines and extruders, which are widely used in new energy, aviation, auto parts, kitchenware, clothing, lighting, bathroom, hardware and other industries.

Since its establishment in 2009, the company has relied on a professional R&D team, combined with advanced die-casting machine manufacturing technology at home and abroad, independently developed and produced hundreds of reliable products with high performance and high stability, and always walked in the forefront of industry technology, thus realizing the rapid development of the company. and it has invested in a new production base in Enping city ,Guangdong in 2022 , covering an area of 23000 square meters.


The final inspection time of each die casting machine is more than 72 hours before leave factory, to ensure that every detail to be the utmost, to create more efficient, energy-saving die-casting machines under precondition of stability and durability of machines.

We provide customers with one-stop solution for free of charge, from workshop layout, selection of machine models, die design, die casting process, full automatic peripherals to further machining after die-casting .

Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA