Audited Supplier
NINGXIN-CFF
Refractory
Molten Metal Filtration
Square, Rectangular, Round
Zr02
Yellow
10/20/30
800-1100
35mm to 200mm
Refractory Material
1500-1700 Celsius
Sic, Alumina, Zirconia
NINGXIN
Carton & Pallet
As per request
Hebei, China
690390
Product Description
SIC ALUMINA ZIRCONIA Ceramic Foam Filter for Foundry Molten Metal Castings Filtration
Ceramic foam filters of NINGXIN are developed and manufactured for the filtration of molten metals. As the most advanced filter type with the highest filtration efficiency, It can effectively reduce inclusions and turbulence of molten metal, ensuring purified molten metal goes into the mold cavity with improved flow rates.
Ceramic foam filters can effectively remove non-metallic inclusions including slag and dross from the molten metal stream. Additionally, foam filters aid in reducing turbulence in the gating system. Ceramic foam filter's outstanding thermal shock resistance and high strength properties were developed for superior performance in extreme metal casting foundry applications.
Simplified pouring system and increasing pouring efficiency
The lengthy runner can be shortened when filters are used. It could greatly save scrap recycling cost, save pouring times and improve pouring efficiency.
Remove tiny slag effectively and purify molten metal
Ceramic foam filters can adsorb nearly 0.1mm diameter tiny slags based on it's special working principle.
Well-distributed molten metal and improve performance
After purification, the casting's density and strength are improved and elongation and impact toughness is improved greatly, some extension rate even can be increased by 19-30%. Therefore, the casting mechanical properties and processing performance are improved obviously.
Reduce turbulence
The molten metal can be changed from turbulent flow to laminar flow when through the 3D structure ceramic foam filters. This could greatly reduce the casting bubble defect.
Model Name: NINGXIN-CERA-A1
Application: For the filtration of molten Iron,copper,brass,aluminum and steelalloy
| Main material | Silicon carbide (SIC) | Aluminium oxide (Al2O3) | Zirconia (ZrO2) |
| Working Temperature | ≤1500ºC | ≤1100ºC | ≤1700ºC |
| Color | Gray black | White | Yellow |
| Hole density (PPI=pores per inch) | 10/15/20/25/30PPI | 20/30/40/50/60PPI | 10/20/30PPI |
| Porosity(%) | 80‐90 | 80‐90 | 80‐90 |
| Compressive Strength(MPa) | ≥1.0 (Room temperature) | ≥1.0 (Room temperature) | ≥1.0 (Room temperature) |
| Bulk Density(g/cm3) | 0.4‐0.55 | 0.35-0.4 | 0.8-1.1 |
| Thermal shock resistance | ≥2times/1100ºC‐Room temp. | ≥2times/900ºC‐Room temp. | ≥2times/1300ºC‐Room temp. |
