Side Force Feeder HDPE LDPE Film PP Woven Bags Recycling and Granulation Line Manufacturer

Side force feeder HDPE LDPE film PP woven bags recycling and granulation line manufacturer , This is mainly used for PP PE film and rigid or hard crushed material is also possible. 

Two stage machine with two screen changer, so that it can fliter much more impurity. Meanwhile the machine with one vacuum degassing and one natural degassing, then the final pellets will be more beautiful. The machine is with high performance and high efficiency, 

Screw is designed with differennt type for different, and the heater also can use Cost Aluminium, cost copper, alloy, keramic or others.

Side feeder with mixer, material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder
Machine detail parameter

The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. High capacity: the capacity of the machine is about 300kg/h
4. Material come out more stably: material go through from the first stage to the second stage, with two screen changer, much more impurity will be filterd and the material come out from the die won't broken down.
5. Beautiful pellets: two degassing system, no air in the pellets.
6. The machine wih long life.

Layout of themachine


Machine line


More machine photoes
Side force feeder(material  feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder, the film can be pressed to the bottom of the feeder)
feeder speed is controlled by gearbox. 



The first stage of machine(After side force feeder, the material will be send to the first stage, with extrusion and first screen changer, the material will go to the second stage) seed the material into the extruder

Material from the first stage to the second stage, the screen changer size is 200mm.

The second stage of the machine(with two stage, the material can be plasticed more time, the final pellets will be better)

Material come out from the die( Normally we use 13,15,17,19,21 holes on the die)

Vacuum degassing on the first extruder, and natural degassing between the first and second stage extruder, with double degassing, the water can be out, and the pellets' quality will be much better

See the whole line of the machine(Side force feeder ----The first stage extruder----The first screen changer----Second stage extruder----Second screen changer----Die----Water tank----Pelletizer)

More machine line


 

Pameter of such kinds of machine

1. We supply below necessary documents with the machine:

1. Machine layout
2. Electricity diagram
3. Machine certificate
4. General manual book/maintenance book

2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.

3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.

4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.