Audited Supplier
| Product name: | 0.3mm 0.5mm silicone rubber sheet heat resistant rubber sheet thin rubber sheet | ||
| Item: | silicone foam sheet | Thickness: | 1-12mm |
| Material: | silicone foam | Hardness: | 25 ± 5 Shore C |
| Surface: | woven surface | Weight: | 10-70kgs per roll |
| Certificate: | ISO, RoHS, REACH | Width: | 914mm or Other |
| Color: | Brownish-red, black, grey etc. | Density: | 0.5-0.55 g/cm3 |
| Procedure: | high temperature curing and foaming | Elongation: | 280% |
| Features: | good elastic ,heat resistance | Tensile strength: | 950-1200 Kpa |
| MOQ: | 100kgs under discussion | Temperature range: | -50°C to 200°C |
| Application: | Used as oil seal, gasket and seal in low temperature and high temperature oil environment; | ||
| Good sealing performance, used in car or machine industries; | |||
| Suitable for environments with high pressure requirements; | |||
| Sample time: | 4-5 days | ||
| Sample fee: | Free cost for 1*A4 sheet ,USD 65 for one squre meter.(can be discussion) | ||
| Payment term: | bank T/T ( 30% in advance, 70% balance before loading) | ||
| Delivery time: | About 7-10 days (base on your confirmed products ) | ||
| Loading Port: | Guagnzhou, Shenzhen,Foshan | ||
| Transport: | Sea (FCL & LCL) or air freight | ||
| Package: | Usually packed in roll, 30~50kgs/roll; or customized | ||
Dongguan Lanhe Electronics Co.,Ltd., located in Dongguan the world's manufacturing capital-China. is a manufacturer and service provider committed to providing customers with professional, high quality and efficient silicone rubber related products solutions.
Our mainly products cover electronics, vehicle medical, artificial intelligence, service and other industries, the main products are: O-ring, oil seal, hydraulic seal, sealing ring, rubber damping pad and other silicone rubber products etc.
Since its inception, the company has always been focused on product research and development and manufacturing, committed to cost optimization and continuous improvement of technology, excellence, quality as life, to provide customers with fast quality products and services, to win customers' consistent praise and high trust.
MAINLY PRODUCTS
Product catalog:
https://membercenter.made-in-china.com/catalogproduct.do?xcase=catalogProductList
GASKETS:
Rubber gasket in metal flange or other parts of the connection between the two static surface sealing function of the thin sheet of rubber products referred to as rubber gasket.It can be made by moulding or by stamping vulcanized film.Rubber gasket is widely used in all kinds of mechanical equipment, lifting gasket, sealing and buffering.
O-RINGS:
O-ring is a general purpose annular sealing device with a circular cross section (derived from the "O" in its name). The purpose of using o-ring seals is to prevent leakage and loss of liquid or gas. They are simple, convenient and have small installation space. Long term sealing performance can be achieved in static or dynamic seals as long as the tank design and material selection are correct and the operating conditions are within the temperature range of the rubber material.
The size of the O-ring is determined by the inside diameter ID and line diameter CS. O-ring size calculation: outer diameter = inner diameter + 2x wire diameter (OD = ID + 2X CS).
OIL SEALS:
Workshop & Testing
Our Advantage
1.With over 60 molding machines. There are 12 machines of 500 tons, 24 machines of 300 tons which can meet the needs of key customers and the capacity of every machine is 7.05 million pieces per month.
2.The nitrogen freezing burr processor we used which is adopting advanced technology in china. The equipment is easy to operate with high efficiency and precision which remove the raw edges without damaging products.
3.The advanced full-size automatic measuring machine was introduced from Israel can make automatic quality inspection and sorting.The detection accuracy reaches 10μm and the speed reaches 300 pieces/min.
4.We have a professional customer service team with a complete service system and strong technical supports.
5. Fast production & in-time delivery that never delay your project and usage.
6. One-stop custom service and value-added service to save your time and cost.
7. OEM/ODM Services are available. We can design and produce various Non-standard.Rubber Parts according to your PDF,3D or STEP drawing files.
FAQ
Q1:Are you a manufacturer or trading company?
Q2: Can you do OEM parts?
A2.:Yes, we mainly do customized rubber and plastic parts. OEM service is available.
Q3:Do you provide samples?
A3:Yes, we could provide samples for you.
Q4:What about the lead time?
A4:It takes 15-20 days for making mould.It takes about 3 days to prepare samples.It takes about 3-6 days for shipping samples by FEDEX, UPS, DHL,TNT.The production lead time for mass order is as per the quantity.
Q5:How do you control the quality?
A5:All raw material we use are brand and new, material properties is stable. Skilled workers take care every details in producing and packing process.Quality control department inspect the product quality in each process.
Q6: What materials are available to produce from your side?
A6: NBR, EPDM, SILICONE, HNBR,FKM, FLS, etc. tc oi
Q7:What is your terms of payment?
A7: Pay deposit by TT in advance balance, pay the balance payment before shipping.
