Audited Supplier
1.Input and output electro-optic isolation or transformer isolation;
2.Input constant current control and LED display,control signal and TTL & CMOS logic is compatible;
3.Bidirectional controlled sillion or unidirectional controllable counter-parallel output,zero electric current opening zero electric current shutdown;
4.Power solid state uses the SCR chip counter-parallel output and working is stable;
5.Buit-in resistance-capacitance absorbing circuit,dead zone voltage and small harmonic interference;
6.Higher than of 2.5KV safe isolation voltage between the input output and ledger wall's;
7.Small volume,small input power, non-contact, sparkless, noiseless, non-machinery wear, anti-vibration and the long life.
Solid state relay connection diagram:
Technical Specification & Diemsnion Drawing
Product Model |
SSR-DD2510W1 | |
| Control Voltage | 5-30VDC | |
| Control Current | 4-25mA | |
| Reverse Voltage | 30VDC | |
| Guarantee close voltage | 1.5VDC | |
| Guarantee open voltage | 3VDC | |
| Load Voltage | 12-250VDC, 12-400VDC | |
| Load Max Current | 5A,10A,20A | |
| Load Mini Current | 0.06A | |
| Breakover Voltage | ≤1.8VDC | |
| Output Leakage Current | ≤1mA | |
| Medium withstand voltage | ≥2500VAC | |
| Insulating resistance | ≥100MΩ | |
| Switching time | ≤5mS | |
| Operating temperature | -20-70ºC | |
| Load current safety factor | resistive load 40-50% | |
inductive load 20-30% | ||
| SSR6 |
FAQ
