Audited Supplier
- The drives Amarillo Gear Company LLC produces for cooling tower, design features and ratings are in accordance with, or exceed, the minimum requirements of AG MA (American Gear Manufacturers Association) and CTI (Cooling Technology Institute) standards. Service Factor= 2.0. The wide application in many brands cooling towers.
Housing and Castings
Castings are rigidly designed and constructed to absorb internal and external loads with minimum deflection. Gear cases are pre-drilled with pilot holes to assist in installation of dowel pins.
Spiral Bevel Gears
Designed and manufactured by Amarillo Gear Company LLC for fan drive service.All spiral bevel gears are precision machined from high grade alloy steel, case hardened and lapped in pairs.
Helical Gears
Helical gears are designed specifically for fan drive service and are precision machined from high grade alloy steel, case hardened and precision ground to provide low-noise, low vibration operation.
Bearings
Amarillo Gear is an industry leader with L10a bearing life exceeding 100,000 hours on all bearings. Input and intermediate bearings provide double the service life specified in AG MA and CTI standards, resulting in lower maintenance costs. The fan shaft bearings are designed to carry all loads imposed by the fan while maintaining this outstanding bearing life.
Quiet Operation
Quiet operation of the Amarillo Fan Drives is achieved through careful design and controlled manufacturing methods of components.
Shaft Seals
Both the input and output shaft openings have 2 spring-loaded, single-lip seals to keep outside contamination from entering the gearbox.
Lubrication
Oversized slinger on the input shaft provides excellent lubrication in either direction or at half speed operation.
Low Speed Operation
For operation when motor speeds are less than 450 rpm, single reduction fan drives require Amarillo Gear's exclusive KLow Speed" option, and double reduction fan drives require a mechanical oil pump for proper lubrication. The addition of these options allow operation with no minimum input speed restrictions.
Service Openings
Large inspection opening facilitates periodic inspections.
| TABLE 1.- SINGLE REDUCTION | |||||||||||||||||||||
| Service Horsepower Ratings (HP) at (Service Factor = 2.0) | |||||||||||||||||||||
| Model | Input (RPM) | Ratio* Nominal Ratio (See Table 2. for exact ratio) | |||||||||||||||||||
| 2.0 | 2.5 | 3.0 | 3.25 | 3.5 | 3.75 | 4.0 | 4.25 | 4.5 | 4.75 | 5.0 | 5.5 | 6.0 | 6.5 | 7.0 | 7.5 | 8.0 | 8.5 | 9.0 | 9.5 | ||
| 65 | 1750 1450 1160 | 25 21 17 | 25 21 17 | 20 17 13 | 18 15 12 | 17 14 11 | 15 12 10 | 12 10 8 | 10 8 7 | ||||||||||||
| 85 | 1750 1450 1160 | 48 40 32 | 45 37 30 | 43 36 29 | 39 32 26 | 36 30 24 | 33 27 22 | 32 26 21 | 28 23 19 | 27 22 18 | 25 21 17 | 20 17 13 | 18 15 12 | 15 12 10 | 15 12 10 | ||||||
| 110 | 1750 1450 1160 | 75 62 50 | 74 61 49 | 72 60 48 | 71 59 47 | 69 57 46 | 64 53 42 | 60 50 40 | 46 38 30 | 40 33 27 | 33 27 22 | 30 25 20 | 25 21 17 | 24 20 16 | |||||||
| 135 | 1750 1450 1160 | 110 91 73 | 93 77 62 | 88 73 58 | 83 69 55 | 71 59 47 | 65 54 43 | 59 49 39 | 48 40 32 | 43 36 29 | 42 35 28 | 35 29 23 | 30 25 20 | ||||||||
| 155 | 1750 1450 1160 | 110 91 73 | 100 83 66 | 90 75 60 | 85 70 56 | 75 62 50 | 65 54 43 | 55 46 36 | 50 41 33 | 45 37 30 | |||||||||||
| 175 | 1750 1450 1160 | 133 110 88 | 126 104 84 | 112 93 74 | 105 87 70 | 100 83 66 | 80 66 53 | 60 50 40 | 60 50 40 | 60 50 40 | 50 41 33 | ||||||||||
| TABLE 2.- EXACT RATIO | ||||||||||||||||||||
| Model | 2.0 | 2.5 | 3.0 | 3.25 | 3.5 | 3.75 | 4.0 | 4.25 | 4.5 | 4.75 | 5.0 | 5.5 | 6.0 | 6.5 | 7.0 | 7.5 | 8.0 | 8.5 | 9.0 | 9.5 |
| 65 | 2.00 | 2.47 | 2.94 | 3.27 | 3.54 | 3.92 | 4.55 | 4.90 | ||||||||||||
| 85 | 2.56 | 3.00 | 3.23 | 3.50 | 3.75 | 4.00 | 4.27 | 4.55 | 4.70 | 5.00 | 5.56 | 6.00 | 6.56 | 7.00 | ||||||
| 110 | 3.46 | 3.77 | 4.00 | 4.25 | 4.45 | 4.73 | 5.00 | 5.50 | 6.00 | 6.56 | 7.00 | 7.50 | 8.00 | |||||||
| 135 | 4.00 | 4.50 | 4.73 | 5.00 | 5.50 | 6.00 | 6.56 | 7.00 | 7.50 | 8.00 | 8.57 | 9.00 | ||||||||
| 155 | 5.08 | 5.58 | 6.00 | 6.56 | 7.11 | 7.56 | 8.00 | 8.50 | 9.00 | |||||||||||
| 175 | 5.08 | 5.58 | 6.09 | 6.60 | 7.10 | 7.56 | 8.13 | 8.50 | 9.14 | 9.57 | ||||||||||
Main information need to be provided for supplying:Motor power &Reduction ratio
Installation size ( customized): out put shaft length, shaft diameter & key ( width x depth)
If any special requirements, please consult NEWIN sales representative.
NEWIN supplys kinds of superior gear reducer for different cooling tower fan drive systems
NEWIN FACTORY
Discover the expansive manufacturing base of NEWIN, nestled in the industrial heartland of Huizhou, Guangdong. This state-of-the-art facility spans a sprawling 10,000 square meters, dedicated to excellence in every facet of production.
ISO CERTIFICATION
NEWIN proudly upholds the highest standards with ISO9001:2015 Quality Management System Certification and ISO14001:2015 Environmental Management System Certification, ensuring impeccable quality and sustainable practices.
WORKSHOPS
Welding Workshop
Filler Thermoforming Workshop
Sheet Metal Processing Workshop
Cooling Tower Assembly Workshop
Independent Testing LAB
NEWIN COOLING TOWERS:
· NWN/ NWF/ NCFN Revolutionary Closed Type Cooling Tower Series, engineered for optimal efficiency and performance.
· NSH/ NST Innovative Open Type Cooling Tower Series, designed for versatility and reliability in diverse applications.
· NTG Robust Industrial Type Cooling Tower Series, crafted for heavy-duty cooling solutions.
· NECN/NECH Advanced Evaporative Condenser, for superior thermal management and energy efficiency.
· NWFL Efficient Dry Air Cooler, offering reliable performance in varied cooling requirements.
At NEWIN, we manufacture and maintain an extensive inventory of essential cooling tower accessories, ready to meet the diverse maintenance and replacement needs for any size or type of cooling tower. Reach out to us for customized solutions tailored to your specific requirements.
CONTAIN:
· Comprehensive Fan Drive System (including fan, fan stack, reducer, motor, shaft, etc.)
· Advanced Water Distribution Components (featuring nozzles, drift eliminator, etc.)
· Superior Heat Exchange Elements (such as PVC infills, cooling coil, etc.)
· Additional Accessories (including air inlet louver, valve, etc.)
Open Type Cooling Towers Shipment: Ensuring the safe and secure delivery of our remarkable open type cooling towers, we meticulously package each unit to withstand the rigors of transport. Our commitment to excellence extends beyond manufacturing to include reliable shipping solutions, ensuring your equipment arrives in pristine condition.
Closed Type Cooling Towers Shipment: We take immense pride in our thoughtful shipping process for closed type cooling towers. Each unit is packaged with precision and care, guaranteeing that it reaches its destination intact and ready for seamless integration into your operations. Trust in our dedicated approach to deliver not just a product, but a promise of quality.
