Audited Supplier
* The width of the output voltage pulse (ie the lighting time of the light source) can be set to 0-999μs;
* Can work in external trigger mode, set the light source time as needed;
* It can also work in internal trigger mode, lighting the light source time according to the set frequency;
* When the load is over-current and short-circuited, the controller will automatically protect and stop the output,
and it can be restored after the fault is removed and the power is turned on again.
Name | Strobe controller |
Model | K792-T4-200 / K792-T4-400 |
The output voltage | 24V |
Total output current | 2.5A |
External trigger voltage | 5~24V |
Output Power | 200W/400W |
Over current protection | >2.5A |
The most electric current on the single road | 2.5A |
Input power | 100~240VAC |
Trigger delay time | <7μs |
Adjustable brightness level | 0~999μs adjustable |
communication method | RS232/network port |
Environment humidityn | 0~40ºC |
Selection example: K792-T4-400 means K792 series, 4 channels, and the total output power is 400W.
Communication parameters
Baud rate | 19200 |
Data bit | 8 |
Stop bit | 1 |
Check Digit | none |
Communication protocol | RS232/network port |
Commands can be sent through the communication serial port.
The communication protocol is as follows:
Each channel command can be sent individually or at the same time
For example: send the command "SA0100# port", the lighting time of the first channel light source
is 100μs.
Send the command "SA0150# SB0320# SC0280# SD0999#",
the lighting time of the first channel light source is 150μs, the second channel light source lighting
time is 320μs, the third channel light source lighting time is 280μs,
the fourth channel light source lighting time Time is 999µs
Remarks: A - the first channel, B - the second channel; C - the third
channel; D - the fourth channel.
1.What type of company are you?
We are a manufacturer,we have stock of most of products and we support customization.
2.What can you buy from us?
Terminal Block Module, Relay Module, Cable, LED Light, Sensor, Control Power Box Body, Push Button, Switch, and Auxiliary Equipment, Human Machine Interface, Frequency Converter, Servo Motor, Module, Reducer and Other Industrial Automation Control Products.
Please contact us if you do not find the product you want.
3.How about the quality of the products?
We can provide one year warranty for you and we have the certification of CE, CCC, UL, and RoHs etc.,
we could send the certification test of our company to you
4.How do you make our business long-term and good relationship?
We have agents in Thailand, Japan, Singapore, Vietnam and South Korea..., and we do hope you become our agent in the future,
welcome to discuss the deep details with us.
