Audited Supplier
Model: TC126
System available: FANUC, SIEMENS, MITSUBISHI, SYNTEC, HCN etc.
Double spindle
8-axis function
Machining range 1-12mm
Electric spindle
Features
*Each axis equipped with imported high-precision linear guide,ball screws and precise bearings.
* Using synchronous guide bush structure,realize high-speed and high-precision machining.
* With guide bush or without guide bush switching flexiblely to meet different needs of processing.
* Key components with gas sealing structure, oil and slag prevention, improving service life and stability.
* Select high torque motor, high rigidity and high strength slipway for each axis and tool holder to meet the requirements of large cutting volume and high efficiency.
* High scalability, tool quantities matched with different requirements of processing, reaching great cost-effective.
Standard configuration
* SYNTEC numerical control system
* Main pneumatic chucking device
* Movable guide bush
* Synchronal rotary guide bush device
* Live tool
* Workpiece belt conveyor
Optional configuration
* Non guide bush
* MITSUBISHI numerical control system
* FANUC numerical control system
* High pressure pump
* Oil mist collector
* Y2 tool holder
* Chip conveyor
* Long workpiece collector
Main accessary brand| Name | Origin and brand | ||||
| Spindle and guide bush bearing | Japan NSK, Germany-FAG | ||||
| Guide rail | Japan THK,Sweden-SKF,Taiwan PMI ,Taiwan HIWIN | ||||
| Guide screw | Taiwan PMI ,Taiwan HIWIN | ||||
| Elextrical components | France-Schneider,Japan IDEC | ||||
| Relay | Japan IDEC | ||||
| Pneumatic system | Taiwan AirTAC, Japan SMC |
| Model | TCQZ125 | TCQZ126 | ||
| 5axis,dual spindle | 6axis,dual spindle | |||
| NC system | SYNTEC 220 | SYNTEC 220 | ||
| Lathe rated power | kw | 12 | 12 | |
| Machining range | ||||
| Maximum machining diameter | mm | φ12 | φ12 | |
| Maximum machining length (one-time clamping)With guide bush | mm | 200 | 200 | |
| Maximum machining length (one-timeclamping)Non guide bush | mm | 2.5D | 2.5D | |
| Max tool installed qty | 20 | 24 | ||
| Main/sub spindle | ||||
| Main spindle power | kw | 1.5/2.2 | 1.5/2.2 | |
| Sub spindle power | kw | 1.5/2.2 | 1.5/2.2 | |
| Main spindle max through hole dia | mm | φ13 | φ13 | |
| Main/sub spindle rev speed | rpm | 12000/12000 | 12000/12000 | |
| Sub spindle max clamping dia | mm | φ12 | φ12 | |
| Sub spindle max through hole dia | mm | φ13 | φ13 | |
| Main spindle tool | ||||
| OD Turning tool | Qty x Model | 8-10*10 | 8 | |
| Side- Live tool | Qty x Model | 3×ER11+1×ER16 | 3×ER11+1×ER16 | |
| Drilling dia | mm | φ10 | φ10 | |
| (/)Tapping/Threading die dia | M5 | M5 | ||
| Live tool rev speed | rpm | 6000 | 6000 | |
| Live tool power | kw | 1 | 1 | |
| End face fixed tool | Qty x Model | 4ER11 | 4ER11 | |
| Drilling dia | mm | φ7 | φ7 | |
| (/)Tapping/Threading die dia | M5 | M5 | ||
| Sub spingdle tool | ||||
| End face fixed tool | Qty x Model | 4×ER11 | 4×ER11 | |
| Drilling dia | mm | φ7 | φ7 | |
| (/)Tapping/Threading die dia | M5 | M5 | ||
| End face live tool | Qty x Model | mm | - | 4×ER16 |
| Drilling dia | mm | - | φ10 | |
| (/)Tapping/Threading die dia | - | M5 | ||
| Live tool rev speed | rpm | - | 6000 | |
| Live tool power | kw | - | 1 | |
| Others | ||||
| Rapid feed speed | m/min | 32(X1/X2/Y1/Z1/Z2) 24(X1) | 32(X1/X2/Y1/Z1/Z2) 24(X1/Y2) | |
| Feed motor power | kw | 1 | 1 | |
| The power capacity | vac | 380 | 380 | |
| Air pressure device | mpa | 0.6 | 0.6 | |
| Cooling box capacity | L | 120 | 120 | |
| Weight | T | 1800 | 1800 | |
| Dimensions | mm | 1900X1150X1750 | 1900X1150X1750 | |
Service and support are a top priority. Our engineers and after sales team are trained to provide uncompromising customer service and support.
Training policy
Pre-training is available at our factory freely for our clients, video or remote training can also be provided. We charge for local training on the basis of travel expense + man day.
Warranty policy
Warranty period: 12-month. It is free of charge if it is damaged under normal use during warranty period. If the equipment is damaged due to improper operation, we charge material fees within one year. After one year, it will charge material fees and Labor costs
1.High quality/Reliable/Robust machines
2.Service and support are top priorities
3.Quickly response 7/24
4.Customized Machine According to Customer's Requirements
5.Integrated solution provider
6.More details please contact us, or send your drawings for professional recommendations
1.What's the main products of your company?
A: We specialized in Swiss-type CNC lathes for small, complex, precision metal parts processing.
2.What CNC system do you use?
A:FANUC, SIEMENS, MITSUBISHI, SYNTEC, HCN .It depends on your choice.
3.How can I choose the most suitable machines?
A:Send us the products drawings and applications ,we will choose the most suitable machines for you.
4.What is your leading time?
A:Generally speaking, 1-3 month based on different quantity.
5.What's the Payment Terms?
A: Our practice is T/T ,30% deposite ,70% balance before shipment.
6.What's the shipment Terms?
A: By sea, by train, by truck, by air(metal parts samples).
7.What's the offering Terms?
A:EXW/Shenzhen, FOB/Shenzhen, CIF/Shenzhen, CFR/shenzhen.
8.Where is your factory located? How can I visit there?
A :Our company is located at Building A#, Xinhui industrial park, Tangtou, Shiyan, Baoan, Shenzhen, Guangdong, CN. We are warmly welcomed to visit us.
