Audited Supplier
waste heat closed sludge dryer,sludge drying system,sludge drying machine,sludge treatment,sludge cake,sewage dryer,sludge dryer machine
waste heat closed Sludge Dewatering Machine,Sludge Dryer,Sludge Drying Machine
Project Site------------sludge dryer sludge drying machine sludge drying system
Characteristics of the waste heat closed sludge dryer
The waste heat type heat source design
can utilize the existing flue gas, generator waste heat, steam condensate, anaerobic digestion (gas made hot water), solar energy and other hot water production as the equipment heat source.
Deep dehydration,reduction infinite
Multi-stage energy comprehensive treatment, strong drying reduction capacity, reduction can be up to more than 80%.break the technical bottleneck of dry mud's high water content and weak reduction ability existing in the traditional drying mode.
Efficient dehumidifying,no-worry about the cost
Multiple invention patent innovative design,highly efficient and energy-saving,each ton of wet sludge with 80% water content will be dried to dry sludge with 10% water content,comprehensive electricity consumption will be low to 50kw.h.
Closed circulation,environment friendly
Utilize closed drying design, no odor discharge,there's no need to install expensive deodorization system which will increase the cost, can be directly installed in the plant for centralized sludge disposal, low condensate COD and simple treatment.
Balance heat and cold, energy saving and consumption reduction
Adopt energy comprehensive application technology, cold and heat balance treatment and utilization, no heat loss, which is different from the continuous wet drainage and heat dissipation, continuous high temperature heat supply drying equipment,the system work energy efficiency is more perfect.
Waste heat drying,dust-free and no explosion
waste heat fully closed low-temperature dry operation, safe and environmental protection, no dust and explosion risks, temperature of outlet materials is less than 48°c,no need for secondary cooling, can be directly stored.
Overall varieties,flexible drying
Product drying and placing of wet material feed range per hour ranges from 3kg-1000kg per hour to meet the drying requirements of different places.At the same time, the product is a comprehensive anti-corrosion design, to ensure the quality of the product, the service life is longer.
Free setting,drying adjustable
Freely set the drying time and drying temperature, to meet the unnecessary dry water content is the requirement, control the drying degree is more accurate, to solve the uncertainty of traditional drying time and inaccurate drying degree and other difficulties.
| Model | RC-50IIJ4dX | RC-100IIJ4dX | RC-100IIJ4dX×2 | RC-100IIJ4dX×3 | RC- 200IIJ4dX×2 | RC-200IIJ4dX×3 |
| Standard water reduction kg/24h | 1200 | 2500 | 5000 | 7500 | 10000 | 15000 |
| Water removal capacity kg/h | 50 | 104 | 208 | 312 | 416 | 624 |
| Operation power kW | 6 | 7.5 | 15 | 22.5 | 28 | 42 |
| installed power kW | 7 | 10 | 19 | 25 | 37 | 52 |
| Standard heat supply quantity kW | 50 | 100 | 200 | 300 | 400 | 600 |
| Hot water flow (temperature difference 20ºC) m³/h | 2 | 4 | 9 | 13 | 17 | 26 |
| Standard cooling amount kW | 45 | 90 | 180 | 270 | 360 | 540 |
| cooling water flow (temperature difference 12ºC) m³/h | 3.5 | 6.5 | 13 | 19.5 | 26 | 39 |
| Number of modules | 1 | 1 | 2 | 3 | 2 | 3 |
| Standard heat supply conditions ºC | 90ºC/70ºC(hot water) | |||||
| Cooling condition ºC | 33ºC/45ºC(cooling water) | |||||
| electric source V/Hz | 380V/3N ~ 50Hz | |||||
| drying temperature ºC | 48~65ºC(return wind)/68~85ºC(wind deliver) | |||||
| Wet mud usage range % | water content(40%~82%)(Different water content has different adaptability) | |||||
| Dry material water content % | Frequency conversion regulation,water content(10%~60%)(the inlet sludge has different water content, the adjustment range of dry material water content is different) | |||||
| Forming mode | Stripe,Squeeze(Different water content,Muddiness shall be suitable for selection) | |||||
| Heat pump outside size(length) mm | 2600 | 2700 | 5400 | 8100 | 6500 | 9750 |
| Heat pump outside size(width) mm | 1860 | 1200 | 1200 | 1200 | 1400 | 1400 |
| Heat pump outside size(height) mm | 2200 | 1800 | 1800 | 1800 | 2200 | 2200 |
| overall outside size(length) mm | 3310 | 3800 | 6500 | 9200 | 8100 | 11350 |
| overall outside size(width) mm | 1860 | 2300 | 2300 | 2300 | 3110 | 3110 |
| Overall outside size(height) mm | 2286 | 2800 | 2800 | 2800 | 3200 | 3200 |
| structural style | assembled | assembled | unassembled | unassembled | unassembled | unassembled |
| Equipment weight kg | 2200 | 3300 | 6000 | 8000 | 9200 | 12500 |
| Model | RC- 200IIJ4dX×4 | RC- 200IIJ4dX×5 | RC- 200IIJ4dX×6 | RC- 200IIJ4dX×7 | RC- 200IIJ4dX×8 | RC- 200IIJ4dX×9 | RC- 200IIJ4dX×10 | |
| Standard water reduction kg/24h | 20000 | 25000 | 30000 | 35000 | 40000 | 45000 | 50000 | |
| Water removal capacity kg/h | 832 | 1040 | 1248 | 1456 | 1664 | 1872 | 2080 | |
| Operation power kW | 56 | 70 | 84 | 98 | 112 | 126 | 140 | |
| installed power kW | 67 | 82 | 97 | 112 | 127 | 142 | 158 | |
| Standard heat supply quantity kW | 800 | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 | |
| Hot water flow rate (temperature difference of 20ºC) m³/h | 34 | 43 | 52 | 60 | 69 | 77 | 86 | |
| Standard cooling amount kW | 720 | 900 | 1080 | 1260 | 1440 | 1620 | 1800 | |
| Cooling water flow rate (temperature difference of 12ºC) m³/h | 52 | 65 | 78 | 91 | 104 | 117 | 130 | |
| Number of modules | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
| Standard heat supply conditions ºC | 90ºC/70ºC(hot water) | |||||||
| Cooling condition ºC | 33ºC/45ºC(cooling water) | |||||||
| electrical source V/Hz | 380V/3N ~ 50Hz | |||||||
| drying temperature ºC | 48~65ºC(return wind)/68~85ºC(wind deliver) | |||||||
| Wet mud usage range % | water content(40%~82%)(Different water content has different adaptability) | |||||||
| Dry material water content % | Frequency conversion regulation,water content(10%~60%)(the inlet sludge has different water content, the adjustment range of dry material water content is different) | |||||||
| Forming mode | Stripe,Squeeze(Different water content,Muddiness shall be suitable for selection) | |||||||
| Heat pump outside size(length) mm | 13000 | 16250 | 19500 | 22750 | 26000 | 29250 | 32500 | |
| Heat pump outside size(width) mm | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 | |
| Heat pump outside size(height) mm | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | |
| overall outside size(length) mm | 14600 | 17850 | 21100 | 24350 | 27600 | 30850 | 34100 | |
| overall outside size(width) mm | 3110 | 3110 | 3110 | 3110 | 3110 | 3110 | 3110 | |
| Overall outside size(height) mm | 3200 | 3200 | 3200 | 3200 | 3200 | 3200 | 3200 | |
| structural style | unassembled | unassembled | unassembled | unassembled | unassembled | unassembled | unassembled | |
| Equipment weight kg | 16000 | 18000 | 22000 | 25000 | 28000 | 31000 | 34000 | |
Yangzhou Pujiang Environmental Protection Technology Co., Ltd. is located in the ancient city of Yangzhou which is very close to Shanghai, China. Our equipments covers: screw press sludge dewatering machine, sewage treatment machine, dosing device, screw conveyor, hopper and sand-water separation equipment etc. Our products are widely used in municipal sewage, petroleum and petrochemical, food and beverage, aquaculture and slaughter, oil and starch, chemical pharmacy, iron and steel metallurgy, textile printing and dyeing, electric power and papermaking industries.We are professional manufacturer for producing waster water sewage treatment equipments.
Customers&Exhibitions
Q: Are you trading company or manufacturer?
A: We are factory. We are professional manufacturer which specializes in producing waste water treatment equipments.
Q: Where is your factory located?
A: Yangzhou City, which is very close to Shanghai with only less than 3 hours' driving.
Q: Do you provide OEM service?
A: Yes. Any required logos are available.
Q: How about the production capacity of your company?
A: We produces machines more than 30000 sets per year.
Q: How could we trust you and your company? This is first time transaction?
A: Our company has long term professional experience. We cooperate over 1000 customers in China and overseas. We export nearly 40 countries all over the world. Welcome to our company and visit our plant production condition any time.
Q: Do you offer after-sales service?
A: Yes. Engineers available for technology assistence.
Q: How long is your warranty?
A: One year after the arrival of the goods.
Q: What about your delivery Time?
A: Normally within 45 days against down payment.
Q: What about the package of your export product?
A: Normally we use anticorrosion wooden case.
Q: What kind of payment do you accept?
A:Normally we do T/T, L/C.
Q: What kind of transportation do you offer?
A: Customers decide freight mode, Air&express & Sea .
