Air flow Dryer/Drum Rotary Drying Machine
Lifetime After-Sales Service
1 Year
Combined
Convective
Powder, Strap, Bulk
Superheated Steam, Air
Atmospheric Pressure
Single
Rotary Dryer
5500 Kg
800-1200 Kg/H
100-120 Kg/H
Wood, Gas, and Others
New
Biomass Sawdust, Chips, Other Solid Material
VANGTON
Wooden Case
1.2M*10M
China
8419399090
Product Description
Drum dryer isused for drying out liquids from raw materials with drying drum. In the drum-drying process, pureed raw ingredients are dried at relatively low temperatures over rotating, high-capacity drums that produce sheets of drum-dried product. The drum dryer is suitable for fuel plant, fertilizer plant, chemical plant, pharmaceutical and other industries.

Principles of Rotary Drying
The directly heated rotary dryer operates on the principle of lifting and showering the product through a hot gas stream moving either in parallel or counter-flow whereas with the indirect dryer, which is more suited to fine and dusty materials, there is little or no contact between the product and the drying gases since they are heated from the outside, via a stationary jacket fitted with either multiple burners or other external heat source.
The efficiency of the dryer is largely dependant on the differential between the inlet and exhaust gas temperatures, although the heat transfer rate is also influenced by the relationship between the design of flights and the speed of rotation. However, irrespective of the gas and material temperatures the drying (or residence) time may be critical, as this is governed by the rate of diffusion of water from the core to the surface of the material.
For special applications, the rotary cascade design is adapted to provide a shortfall, or 'Cruciform', lifter configuration.
Similarly, Rotary Cascade Coolers and Combined Dryer/Coolers are available as required.

Features of the Rotary Drying
Robust construction
Permits use of higher drying temperatures
Relatively long residence time
Drum provides dispersion as material is conveyed along the length
Benefits of Rotary Drying
Combines flexibility with reliability resulting in a long service life. The rotary is also suitable for operation with a wide range of materials & particle sizes and can more readily accommodate 'upset' up-stream process conditions
Co-current is suitable for materials with relatively high moistures and provides rapid evaporation without overheating the product. Counter-current has the greatest thermal gradient and helps achieve low product moistures
Reduces equipment size and the associated capital and operating costs
Promotes diffusion drying
Relatively low fan power and low headroom
Enables energy savings
OUR PROJECTS

OUR CERTIFICATE

THE CLIENTS WITH US

OUR SERVIC
Pre-sale service
1.Our professional and experienced engineer team helps every client to find his most suitable equipment or chose of plant.
2. Any kind of legal logo printing or design are available.
3.Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.
After you choose:
1. We will make drawing and show you how the pant looks.
2. Every equipment will be checked carefully before packing. Video on machine testing is available.
3. Email you the tracking no., and help to chase the container until it arrives you.
After-sale service
1.We are very glad that customers give us some suggestion for price and products.
2.If you have any question,please contact us freely by E-mail or Telephone.
FAQ
Q. what is your payment term?
A: T/T 30% down payment, balance to be paid before shipment.
Q: what is your main market?
A: South America, Eastern Europe, Southeast Asia, Africa, Oceania, Eastern Asia
Q: what is your producing time?
A: Producing time depends on that machines you ordered. Usually takes 45 days.
Q: what documents you can offer?
A: We can offer invoice, packing list, contract, instructions, customs declaration, certificate of origin, CE. If client need other documents, specifications, please confirm with service staff.
Q: If equipments have some quality problem, how would you deal with?
A: We will responsible for all the quality problems. We will check the machine to get the problem. If need parts, will send them to you.
Q: how to install the equipments?
A: We send 1-2 engineer (100usd/person/day) to the local plant for helping install and commissioning equipments. To save time, our service stuff will tell you what to prepare in advance. We can also teach the workers to how to use the machines and how to make the products better.
Model | DR650B | DR650A | DR1200B | HG1000 | HG1100 | HG1200 | HG1500 | HG1800 | HG2000 |
Initial moisture | 30%-40% | 30%-40% | 30%-40% | 35%-45% | 35%-45% | 35%-45% | 35%-45% | 35%-45% | 35%-45% |
Final Drying Moisture | 10%-15% | 10%-15% | 10%-15% | 10%-15% | 10%-15% | 10%-15% | 10%-15% | 10%-15% | 10%-15% |
Fan power | 7.5KW | 7.5KW | 7.5KW | 11KW | 15KW | 18.5KW | 22KW | 37KW | 45KW |
Drum Power | 2.2KW | 2.2KW | 5.5KW | 2.2KW | 3KW | 5.5KW | 7.5KW | 11KW | 12KW |
Drum size | 0.65M*10M | 0.65M*10M | 1.2M*10M | 1M*6M | 1.1M*8M | 1.2M*10M | 1.5M*12M | 1.8M*12M | 2M*12M |
Drying Pipe Diamet | 300MM | 300MM | 300MM | 350MM | 400MM | 450MM | 500MM | 600MM | 700MM |
Cyclone diameter | 900MM | 900MM | 900MM | 1050MM | 1200MM | 1270MM | 1500MM | 1800MM | 2000MM |
Fuel Consumption | 100-120KG/H | 80-120KG/H | 100-120KG/H | 80-100KG/H | 100-120KG/H | 130-160KG/H | 200-250KG/H | 300-350KG/H | 450-500KG/H |
Drying Speed | 500-600KG/H | 500-600KG/H | 800-1200KG/H | 700-900KG/H | 800-1200KG/H | 1300-1500KG/H | 1500-2000KG/H | 2000-2500KG/H | 2800-3000KG/H |
Machine Weight | 3900KG | 3700KG | 5500KG | 4300KG | 5500KG | 7400KG | 11600KG | 23800KG | 28500KG |

Principles of Rotary Drying
The directly heated rotary dryer operates on the principle of lifting and showering the product through a hot gas stream moving either in parallel or counter-flow whereas with the indirect dryer, which is more suited to fine and dusty materials, there is little or no contact between the product and the drying gases since they are heated from the outside, via a stationary jacket fitted with either multiple burners or other external heat source.
The efficiency of the dryer is largely dependant on the differential between the inlet and exhaust gas temperatures, although the heat transfer rate is also influenced by the relationship between the design of flights and the speed of rotation. However, irrespective of the gas and material temperatures the drying (or residence) time may be critical, as this is governed by the rate of diffusion of water from the core to the surface of the material.
For special applications, the rotary cascade design is adapted to provide a shortfall, or 'Cruciform', lifter configuration.
Similarly, Rotary Cascade Coolers and Combined Dryer/Coolers are available as required.

Features of the Rotary Drying
Robust construction
Permits use of higher drying temperatures
Relatively long residence time
Drum provides dispersion as material is conveyed along the length
Benefits of Rotary Drying
Combines flexibility with reliability resulting in a long service life. The rotary is also suitable for operation with a wide range of materials & particle sizes and can more readily accommodate 'upset' up-stream process conditions
Co-current is suitable for materials with relatively high moistures and provides rapid evaporation without overheating the product. Counter-current has the greatest thermal gradient and helps achieve low product moistures
Reduces equipment size and the associated capital and operating costs
Promotes diffusion drying
Relatively low fan power and low headroom
Enables energy savings
OUR PROJECTS

OUR CERTIFICATE

THE CLIENTS WITH US

OUR SERVIC
Pre-sale service
1.Our professional and experienced engineer team helps every client to find his most suitable equipment or chose of plant.
2. Any kind of legal logo printing or design are available.
3.Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.
After you choose:
1. We will make drawing and show you how the pant looks.
2. Every equipment will be checked carefully before packing. Video on machine testing is available.
3. Email you the tracking no., and help to chase the container until it arrives you.
After-sale service
1.We are very glad that customers give us some suggestion for price and products.
2.If you have any question,please contact us freely by E-mail or Telephone.
FAQ
Q. what is your payment term?
A: T/T 30% down payment, balance to be paid before shipment.
Q: what is your main market?
A: South America, Eastern Europe, Southeast Asia, Africa, Oceania, Eastern Asia
Q: what is your producing time?
A: Producing time depends on that machines you ordered. Usually takes 45 days.
Q: what documents you can offer?
A: We can offer invoice, packing list, contract, instructions, customs declaration, certificate of origin, CE. If client need other documents, specifications, please confirm with service staff.
Q: If equipments have some quality problem, how would you deal with?
A: We will responsible for all the quality problems. We will check the machine to get the problem. If need parts, will send them to you.
Q: how to install the equipments?
A: We send 1-2 engineer (100usd/person/day) to the local plant for helping install and commissioning equipments. To save time, our service stuff will tell you what to prepare in advance. We can also teach the workers to how to use the machines and how to make the products better.