Audited Supplier
The smooth surface of the implant has many advantages. Firstly, the surgical incision is relatively small so it would be easier to implant in the chest peeling cavity. Secondly, the chest fluctuates more naturally after the operation.
Product structure: Silicone gel-filled breast implants are constructed of shell made by medical grade two-part addition-cure silicone elastomer and filler made by silicone gel.
Product performance: The production and inspection of silicone gel-filled breast implants is consistent with the technical requirement of medical device (technical requirement number of medical device: CFDA20153130588); the product performance complies with the requirements of YY 0647 Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607), YY/T 0640 Non-active surgical implants - General requirements (ISO 14630) and the relevant laws and regulations.
 |  |  |  |
| Multiple profiles and sizes | High resistancy, 6.5 million times fatigue resistance test | Approved by CFDA | Strong gel cohesion, shell elongation exceed 1000%, excellent resilience |
Indication:
Used for augmentation, reconstruction and revision caused by hypomastia and breast defects and for sex-change surgery.
 |  |  |
| Agglomeration Technique The optimized technique can control the index of the surface pores, making the human tissues more easily to grow into the pores and being soft. | By enhancing the cohesive technique, the Snow Lamb« is more dynamic and realistic under the guarantee of the implant's intensity. | The Setreoscopic network increase the elasticity of the silicone gel and stability of the shape to keep the implant as excellent as before. |
| Lambe has the shell of twelve to fifteen layers structure, filling with soft cohesive silicon gel.lt has good endurance and feeling touch and also the anti-leakage techinique can effectively prevent the gel seeping. | Lambe breast implant use the raw material from Nusil and its safety has been proved by NAS. |
| REF | Width(W)±3mm | Height(H)±3mm | Profile(P)±5mm |
| DHGHP160 | 95mm | 95mm | 32mm |
| DHGHP180 | 98mm | 98mm | 33mm |
| DHGHP200 | 101mm | 101mm | 36mm |
| DHGHP220 | 104mm | 104mm | 37mm |
| DHGHP240 | 107mm | 107mm | 39mm |
| DHGHP260 | 110mm | 110mm | 40mm |
| DHGHP280 | 112mm | 112mm | 41mm |
| DHGHP300 | 115mm | 115mm | 43mm |
| DHGHP320 | 116mm | 116mm | 45mm |
| DHGHP340 | 119mm | 119mm | 40mm |
| DHGHP360 | 122mm | 122mm | 47mm |
| DHGHP380 | 123mm | 123mm | 48mm |
| DHGHP400 | 125mm | 125mm | 49mm |
| DHGHP440 | 129mm | 129mm | 51mm |
| DHGHP480 | 133mm | 133mm | 53mm |
| DHGHP500 | 135mm | 135mm | 54mm |
| DHGHP550 | 138mm | 138mm | 55mm |
| DHGHP600 | 139mm | 139mm | 56mm |
| REF | Width(W)±3mm | Height(H)±3mm | Profile(P)±5mm |
| DHGSHP200 | 93mm | 93mm | 46mm |
| DHGSHP220 | 96mm | 96mm | 47mm |
| DHGSHP240 | 98mm | 98mm | 49mm |
| DHGSHP260 | 101mm | 101mm | 50mm |
| DHGSHP280 | 103mm | 103mm | 52mm |
| DHGSHP300 | 106mm | 106mm | 53mm |
| DHGSHP325 | 108mm | 108mm | 54mm |
| DHGSHP350 | 111mm | 111mm | 55mm |
| DHGSHP375 | 114mm | 114mm | 56mm |
| DHGSHP400 | 116mm | 116mm | 57mm |
| DHGSHP425 | 118mm | 118mm | 59mm |
| DHGSHP450 | 121mm | 121mm | 61mm |
| DHGSHP475 | 123mm | 123mm | 62mm |
| DHGSHP500 | 126mm | 126mm | 63mm |
| DHGSHP550 | 128mm | 128mm | 67mm |
| DHGSHP600 | 129mm | 129mm | 71mm |
1. Medical Reconstruction
·Post-mastectomy reconstruction
Restoring breast shape after unilateral or bilateral mastectomy to improve psychological well-being and quality of life.
·Congenital deformity correction
For conditions such as Poland syndrome (pectoral muscle deficiency with breast hypoplasia), congenital absence, or severe underdevelopment of the breast.
·Post-traumatic or post-infective repair
Addressing tissue loss caused by trauma, severe infections, or prior surgeries.
2. Aesthetic Augmentation
·Addressing insufficient breast volume
For congenital hypoplasia, post-lactation atrophy, or significant weight loss leading to breast flattening.
·Correcting breast asymmetry
Adjusting congenital or acquired asymmetry (e.g., due to surgery or trauma).
·Shape enhancement
Improving sagging or lax skin-related appearance issues (may require combined breast lift surgery).
3. Gender-Affirming Surgery
·Transgender women (male-to-female)
As part of gender confirmation surgery to achieve feminine breast characteristics.
4. Implant Replacement
·Managing complications
Replacing implants in cases of capsular contracture, rupture, or displacement.
·Aesthetic preference changes
Adjusting implant size or type (e.g., switching from round to teardrop-shaped implants).
Guangzhou Wanhe Plastic Materials Co., Ltd. (referred to as "Wanhe"), founded in 1996, is a high-tech enterprise with a production site covering an area of 130,000 square meters and 2,500 square meters of GMP standard clean area, specializing in researching, developing and manufacturing silicone plastic medical devices. Mainly engaged in the development, production and sale of Silicone Gel-filled Breast implants, Silicone Facial Subcutaneous Implants, Tissue Expanders for Single Use, Medical Silicone Gel Sheets and Nostril Retaines.
 |  |  |
| Breast Implants - Shell Production Room | Breast Implants - Production Center | Breast Implants - Production Center |
From the date on it's establishment, Wanhe has Obtained ISO9001, ISO13485 quality management system certification, has received the certification of National High-Tech Enterprise for 4 times, and has obtained theRDC/61-2000 certification of Brazil National Health Surveillance Agency(ANVISA).
