Audited Supplier
Soundlink Zb03-B Professional Hearing Aid Dehumidification Maintenance Cleaner Vacuum Pump
| Product Name | Soundlink ZB03 II professional hearing aid vacuum pump cleaner |
| External dimension | 345 x 200 x 255 mm |
| Drying tank dimension | φ100x90 (mm) |
| Net Weight | 6 kg |
| Color | Black+White |
| Time Alarm | 15 min |
| Working Noise | <65dB |
| Work Power | 50Hz ± 1Hz |
| Overload Protection | RFφ5x20 1.5A/250V |
| Single package size: | 55 x 36 x 35 cm |
| Adapting plug | Flat Plug, Round Plug |
The Soundlink Hearing Aid Vacuum Pump Cleaner is a state-of-the-art device designed to efficiently dry and clean hearing aids. With its powerful motor, it can effectively remove moisture and dirt from the device without the risk of liquid damage. Its unique design ensures a deep cleaning that leaves your hearing aid looking and functioning like new.
Low noise
Our Vacuum Pump chamber is designed to provide a quiet and efficient cleaning experience. With a noise level below 65 dB, it can be comfortably used in any environment without causing disturbance.
Easy to operate
The hearing aid vacuum dehumidifier has a simple on/off switch and is easy to operate. Suitable for people of all ages, even older people who are less familiar with electronic devices.
Powerful suction
Hearing aid vacuum have enough strong suction to remove dirt and debris from tiny crevices in hearing aids. Its powerful suction function ensures thorough cleaning of hearing aids, eliminating debris and keeping them in excellent condition.
Emergency pressure relief
After the operation of the machine stops, when the vacuum tank does not automatically relieve pressure, you can use the small word starting point counterclockwise to spin the machine back of the emergency pressure relief valve, so balance the pressure in the tank, you can open the tank cover. Turn clockwise before powering on to close the emergency relief valve.
How to vacuum hearing aids?
1. The pin of the blow-out handle is thick, the needle of the vacuum handle is thin, the corresponding interface should be connected correctly.
2. Keep the needle from bending. Always use a through needle to clean pinholes to keep the holes smooth.
3. When vacuuming cleans, the needle must not be inserted into the microphone or receiver too deep to avoid damaging the microphone or the receiver.
4. Take out the batteries on the magnetic stored position on the side of cover.
5. Vacuum pump continuous operation should not exceed 30 minutes, the factory set a limit of 15 minutes.
6. The hearing aid vacuum cleaner is only used for the maintenance of hearing aids and should not be used in gas and explosive gases containing particulate dust.
7. The replacement fuse pipe should be repaired and troubleshooting by professionals before start up.
8. Be sure to unplug the power cord from the power socket in order to completely cut off the power.
Why Choose Us?
- We are the leading systems integrator of hearing aid products and solutions in China, serving more than 6,000 hearing institutions worldwide(world's top hearing aid manufactures, global chain stores, distributors, earmould labs, 3D printing and so on.) Our business cooperation partners are located across 150+ countries and regions.
- We supplys complete solutions including Hygiene & care, Ear Impression, Market & Display, 3D printing & Earmold lab related goods, and hearing aid accessories.
- We have experienced R&D team, supply chain management, customer service system, and global trade experience. You will have international trade experience with both good quality and high speed.
- We participate in EUHA in Germany and AAA in the United States every year. We show customers the latest products and have face-to-face communication with customers.
Related Product
Established in 2004, Soundlink is a professional supplier for hearing aid accessories and earmold lab solutions. We build the first 3D printing lab for earmold and hearing aids in China.
With 18 years of rapid development, Soundlink supply complete solutions including Hygiene&care, Ear Impression, Market&Display, 3D printing&Earmold lab related goods, and hearing aid accessories.
And has become a strategic partner of many hearing aid manufacturers like, Sivantos, Phonak, Oticon, Starkey, GN, Resound and more than 10000pcs hearing clinics.
Q: What is your MOQ?
A: There is Customers can purchase according to their needs.
Q: What are the payment methods you accept?
A: We provide multiple options such as TT, Paypal, Credit Card online.
Q: How to ship goods?
A: Small size parcels are shipped by DHL, FedEx, TNT, UPS. Bigger volume package are shipped by air or by ocean to save cost.
Q: What is the delivery time?
A: General goods are shipped within 7 days if stock enough. If w/o stock, the delivery time will be based on qty, customize or not.
Q: How do you guarantee the quality of your products?
A: The Production Process is Design → Production → Assembling → Quality Testing → Packing → Loading → Shipping. Each product has strict QC standards.
Q: Is OEM available?
A: Yes, OEM is available.
