Audited Supplier
BSMJ Shunt Capacitor
Feature
- Small volume, light weight
- Low loss: active loss ≤1.2W/kvar
- Excellent self-healing property: Rapidly self-healing after midum dielectric breakdown by over-voltage or over-current, recovered to normal work.
- Good Safety performance: Discharge resitor and over-pressure protection device inside capacitor
- No leaking
- Applicable
- BSMJ series self-healing low voltage shunt power capacitor is applied to improve the power factor of circuit by the parallel connection with AC electric power system with rated voltage lower than 1000V and 50/60Hz.
- Environmental conditions of installation
- Temperature rage: -25ºC/50ºC
- Altitude: ≤2000m
- When temperature is 35ºC, humidity should be ≤90%
- There is no harmful gases, no electrical conductivity or explosive dust, or violent vibration in the installation place.
- There shoulde be 30mm gap at least if two sets capacitor need to be installed together. Cooling measures should be taken in hot summer.
- Main technical data
- Rating Voltage: 0.23~11.14kv
- Rating capacitance: 1~60kvar
- Rating frequence: 50Hz/60Hz
- Tolerance: -2~+5%
- Active loss: ≤1.2W/kvar
- T-T Voltage: 2.15Un 10s
- Max permissible overvoltage: 1.1Un
- Max permissible overcurrent: 1.3In
- Self-discharge charactor: Residual voltage from Un to 50V or below with 3 minutes after capacitor power off
- Executive standard: GB/T12747-2004, IEC 60831-2002
- Notes of installation and running
- Installation and maintenance should be perfomed by a qualified personnel.
- Must cut off power before running.
- Interval between disconnect and next operation should be more than 3 minutes, use a insulation wire to discharge two poles of capacitor before touching capacitor.
- More than 30mm gap should be maintained between capacitors, inner capacitor cabinet should be enough ventilation space and should be installed in a wee-ventilated place.
- Main models and specifications
- Single phase products installation dimensions are same as three phases products if their specifications are same.
- We can supply you other special specification products.
| Dimensions | |||||||
| No. | MODEL | Rating Voltage (K V) | Rating Volume (k var) | Rating Freqeuncy (Hz) | Rating Capacity ( uF) | Rating Current (A) | Shell Outer Heigth (mm) |
| 1 | BSMJ0.25-5-3YN | 0.25 | 5 | 50 | 254.6 | 11.5 | 130 |
| 2 | BSMJ0.25-10-3YN | 0.25 | 10 | 50 | 509.3 | 23.1 | 185 |
| 3 | BSMJ0.25-15-3YN | 0.25 | 15 | 50 | 763.9 | 34.6 | 240 |
| 4 | BSMJ0.25-20-3YN | 0.25 | 20 | 50 | 1018.6 | 46.2 | 270 |
| 5 | BSMJ0.25-25-3YN | 0.25 | 25 | 50 | 1273.2 | 57.7 | 270 |
| 6 | BSMJ0.25-30-3YN | 0.25 | 30 | 50 | 1527.9 | 69.3 | 200 |
| 7 | BSMJ0.4-3-3 | 0.4 | 3 | 50 | 59.7 | 4.3 | 130 |
| 8 | BSMJ0.4-5-3 | 0.4 | 5 | 50 | 99.5 | 7.2 | 130 |
| 9 | BSMJ0.4-10-3 | 0.4 | 10 | 50 | 198.9 | 14.3 | 130 |
| 10 | BSMJ0.4-15-3 | 0.4 | 15 | 50 | 298.4 | 21.6 | 185 |
| 11 | BSMJ0.4-20-3 | 0.4 | 20 | 50 | 397.9 | 28.9 | 220 |
| 12 | BSMJ0.4-25-3 | 0.4 | 25 | 50 | 497.4 | 36.1 | 240 |
| 13 | BSMJ0.4-30-3 | 0.4 | 30 | 50 | 596.8 | 43.3 | 270 |
| 14 | BSMJ0.4-40-3 | 0.4 | 40 | 50 | 795.8 | 57.5 | 240 |
| 15 | BSMJ0.4-50-3 | 0.4 | 50 | 50 | 994.7 | 72.2 | 240 |
| 16 | BSMJ0.4-60-3 | 0.4 | 60 | 50 | 1193.6 | 86.6 | 270 |
| 17 | BSMJ0.45-3-3 | 0.45 | 3 | 50 | 47.2 | 3.8 | 130 |
| 18 | BSMJ0.45-5-3 | 0.45 | 5 | 50 | 78.6 | 6.4 | 130 |
| 19 | BSMJ0.45-10-3 | 0.45 | 10 | 50 | 157.2 | 12.8 | 130 |
| 20 | BSMJ0.45-12-3 | 0.45 | 12 | 50 | 188.6 | 15.4 | 185 |
| 21 | BSMJ0.45-14-3 | 0.45 | 14 | 50 | 220.1 | 18 | 185 |
| 22 | BSMJ0.45-15-3 | 0.45 | 15 | 50 | 235.8 | 19.2 | 185 |
| 23 | BSMJ0.45-20-3 | 0.45 | 20 | 50 | 314.4 | 25.7 | 220 |
| 24 | BSMJ0.45-25-3 | 0.45 | 25 | 50 | 393 | 32.1 | 240 |
| 25 | BSMJ0.45-30-3 | 0.45 | 30 | 50 | 471.6 | 38.5 | 240 |
| 26 | BSMJ0.45-40-3 | 0.45 | 40 | 50 | 628.8 | 51.3 | 270 |
| 27 | BSMJ0.45-50-3 | 0.45 | 50 | 50 | 786 | 64.2 | 200 |
| 28 | BSMJ0.45-60-3 | 0.45 | 60 | 50 | 943.1 | 77 | 270 |
| 29 | BSMJ0.525-5-3 | 0.525 | 5 | 50 | 57.7 | 5.5 | 130 |
| 30 | BSMJ0.525-10-3 | 0.525 | 10 | 50 | 115.5 | 11 | 185 |
| 31 | BSMJ0.525-15-3 | 0.525 | 15 | 50 | 173.2 | 16.5 | 220 |
| 32 | BSMJ0.525-20-3 | 0.525 | 20 | 50 | 231 | 22 | 240 |
| 33 | BSMJ0.525-25-3 | 0.525 | 25 | 50 | 288.7 | 27.5 | 240 |
| 34 | BSMJ0.525-30-3 | 0.525 | 30 | 50 | 346.5 | 33 | 270 |
| 35 | BSMJ0.525-40-3 | 0.525 | 40 | 50 | 462 | 44 | 200 |
| 36 | BSMJ0.69-5-3 | 0.69 | 5 | 50 | 33.4 | 4.2 | 130 |
| 37 | BSMJ0.69-10-3 | 0.69 | 10 | 50 | 66.9 | 8.4 | 130 |
| 38 | BSMJ0.69-15-3 | 0.69 | 15 | 50 | 100.3 | 12.6 | 185 |
| 39 | BSMJ0.69-20-3 | 0.69 | 20 | 50 | 133.7 | 16.7 | 220 |
| 40 | BSMJ0.69-25-3 | 0.69 | 25 | 50 | 167.2 | 20.9 | 240 |
| 41 | BSMJ0.69-30-3 | 0.69 | 30 | 50 | 200.6 | 25.1 | 270 |
| 42 | BSMJ0.69-40-3 | 0.69 | 40 | 50 | 267.4 | 33.5 | 200 |
| Note: Can be manufactured according to customer's request. | |||||||
Capacitors Details:
High-Return Solutions
Specifically to your satisfaction.
Most of our customers have been doing business with us for more than a decade, with full trust in our capabilities and reliability. We take pride in solving different challenges to customers in a productive way. Maybe you need a special collection, a distinct packing, an urgent delivery or any other supports, our team is here ready to offer you the integrated solutions and save you more.
OEM and ODM
Contract manufacturing and housing molding for your brand.
Your brand and personal preferences could be custom on the products and packings. As a comprehensive capacitor manufactuer, Topo possesses the extensive custom design capabilities to meet your specific requirements, which help you to extend your brand's advantages.
ECO Friendly and Full Material
Speaking of quality, green material is the very start. Topo only utilizes the materials friendly to the environment with a social responsibility perspective. Besides, great quality films make excellent capacitors. We never cut corners on materials, but apply full materials for each parts.
Free Sample for Testing
An adequate amount of free samples could be offered for your testing of the important electrical parameters. From these aspects those prove that our products are of high quality and can stand the tests.
Rest assured and get your samples right away!
FAQs
Topo knows about your general concerns. Check the Q&A that will help you save time and worries in the first place. If your question is not listed, please contact us and we are happy to help.
Can the Topo capacitors be used in the AC and DC circuits?
Generally, our capacitors could apply with both circuits of AC and DC. Yet most of our products are for AC circuit purpose.
Are the Topo capacitors compliance products of EU CE and RoHS?
Yes. All of our capacitors comply with the CE, VDE, and RoHS standards.
Can I print my brand on the capacitor?
Absolutely. Topo has the capability of OEM and ODM. You are free to choose custom services or our regular high-standard capacitors.
How long does a quotation take?
In most cases, your enquiry will be answered within 24 hours. Rest assured that your enquiry will be taken seriously.
Can I get samples?
Sure. We offer adequate samples for your testing free of charge. However, the freight is not covered.
