Speed Control Laboratory Lab Benchtop Centrifuge Machine

Desktop Electric Lab Laboratory Centrifuge Machine Lab Medical Practice w/Timer and Speed Control - Low Speed,4000 RPM, Capacity 20 ML x 6-110v
Maintanance and precautions:
1,electrical machinery should be poured into lubricating oil every three months.
2,when not using,it should be kept in dried room.
3,after using for long time,if carbnatebrush is less than 10mm,it should be changed.
4,plug and socket should have good earth wire.
5,weight of test tube and test tube cover shoul be equal.when they are different,they can not be used.

• Time rang:0~60min or without limit.
• Maximum relative Centrifugal force: 1790×g.
• Electric current:AC110V 60 HZ. Capacity:20ml×6
• Maximum speed: 4000r/min.6
• Tubes are provided in this lab centrifuge,
• Centrifugal capacity is 20ml per tube, benefitting your workflow efficiency.
• Table-centrifugal machines are widely used in the laboratory or produce department for organisms, medical, chemistry etc.
• Our lower speed centrifugal machine with the maximum speed 4000r/min and be equipped with/without timer.
• It mainly be used for the appraisal radioactivity and separate cell or particle.

 

Safety -To prevent the Centrifuge  tube fly out of the machine ,we had safety door lid-interlock prevent opening the centrifuge lid until the rotor has stopped spinning and automatic lid-lock release when operation has stopped to save processing time

The centrifuge can place 6 Tubes once a time 
1.More Efficency centrifuge can hold 20mlX6 tubes .
2.Tubes need to be inserted into the machine symmetrically, it is not allowed to operate the machine asymmetrically,the balance of the centrifuge machine was very important before turn on ,
3.It will show as error once the tube and the weight didnot symmetrically placed

Maximum capacity of 6 x 20ml
Maximum speed of 4000rpm,
Good choice for low volume sample separation.Worktop centrifuge Safe, compact and quiet to use Ideal for home and educational settings
Compact and quiet enough to install in an office or classroom as well as in laboratories and medical settings
The speed dial ranges from 0-4000rpm and it has a 0 to 60 minute timer.
If the switch of time didnot turn on ,it means the centrifuge machine will always operating until the control of the speed was shutdown

 

The production of the lab centrifuge machine introduce
1.Start by the blanking process for the metal part

Normally the house of the centrifuge machine was made by the steel or stainless steel of type as 316
The part was beginning as the blanking
1.Laser blanking machine capacity :8000*2000*10mm 
2.We had about 15 pcs of the laser cutting machine in blanking workshop ,name from No1 to No 15,
3.6S fully carry out in our workshop according to the iso13485,
4.All of the raw material can be Traceability

The press brake machine is a powerhouse in the metal fabrication industry, providing an efficient and successful method to bend sheet metal into different forms
To form the metal part into the shape we need ,the first part was by the bending press and the bending die

 

Stainless Steel :Provides great strength and resistance to corrosion, but its greater spring back the ability to revert to its original shape after bending means that it must be handled carefully. 

 

Centrifuge machine need the bracket for the motor and metal stamping part for the housing and electric connect part,The progressive die stamping can give out the huge volume and low cost for the Centrifuge machine spare metal part.

The Centrifuge machine need a lot of welding ,to imporve the capacity and welding quality we introduce the welding robot machine instead of labor human welding
1.QTY of the welding robot :23pcs
2.Capacity of the welding robot :500A
3.Work station:2000*1500mm

Plastic part was one part of the high speed and low speed centrifuge machine
We had about 10 sets of the plastic injection work for the centrifuge machine.
1.The capacity for plastic injection machine was :1000*850*750mm
2.The max ton for plastic injection machine was 1000T

The 6S was fully carry out in our warehouse with the ERP system 
1.We need to know how many part in our warehouse
2.We need to anticipate the part when to full fill in for all the benchtop centrifuge centrifuge machine
 

The rotor was the key part for the centrifuge centrifuge ,to make it perfect especial for the high speed centrifuge centrifuge ,we need to control the tolerance of the rotor very tight,that was why we introduce the centrifuge centrifuge
1.CNC QTY:15PCS
2.Tolerance for CNC machine :0.01mm

All the high speed and low speed centrifuge machine need to be test before transfer it to the warehouse.

Customer review our Laboratory Centrifuge Machine workshop,We were welcome all of our customer to visit our company to review and test the Centrifuge Machine for Organisms, Medical, Chemistry,Our business vision was :long term business ,win-win for the future

The maintain and repair guarantee for the Centrifuge Machine workshop was the key to the business ,when a customer bought a machine from us ,the guarantee was the most importance things customer concern.we sent out technical service team to oversea customer site for the maintain and repair for our customer .Our service for the lab equipment was not stop after the Centrifuge Machine sold ,it was the start for our company and your company for win win situation .You use the Centrifuge Machine we take care of the rest.

We take part into the MedtecChina Canton Fair (The China Import and Export Fair) exhibition every year ,hope one day we can meet each on the fair

The supplier and the customer was togeher for the future ,both parties should be in win-win situation ,so we were looking forwarder to hold hand by hand for bright future.