Audited Supplier
DC4382 series ultrasonic anemometer, supplied by Lucyelec Test Equipment, is a wind sensor product that uses the phase difference of the ultrasonic wave in the air propagation time to measure the wind speed and direction through precise calculation. It can simultaneously measure the wind speed and direction of the measured environment.
The shell of the product is made of high-quality aluminum alloy by die-casting, and with special surface treatment process, it has strong durability, high corrosion resistance and sand resistance, and the sealing protection level can reach IP67; The product has no mechanical wear of any rotating parts, long service life and maintenance free; The product is designed with automatic temperature control system, automatic program control, efficient and accurate heating, and is especially suitable for harsh working conditions on land and sea, such as severe cold, high altitude, high humidity, strong wind and sand, low temperature and freezing.
Features and Advantages:
- Simultaneous measurement of wind speed and direction.
- No initial wind speed limit, high-precision measurement.
- No rotating parts and zero mechanical wear, long service life and maintenance-free.
- Digital filtering technology, strong anti-electromagnetic interference ability.
- Multiple output modes, analog/digital output, compatible with THIES, FT, Lambrecht, Kriwan, NRG, LUFFT, etc..
- High-quality aluminum alloy material shell with special surface treatment, it is lightweight, compact, corrosion resistant and sand resistant.
- Automatic program control, efficient and accurate heating, suitable for high altitude, cold, freezing and other harsh working conditions.
| Product Name | 2-axis ultrasonic static anemometer |
| Wind Speed | Measuring range: 0-50m/s 0-60m/s 0-70m/s 0-75m/s |
| Accuracy: ±0.3m/s, ±3% RMS(> 35m/s) ±0.2m/s, ±2% RMS(> 35m/s) optional | |
| Resolution: 0.1m/s | |
| Wind Direction | Measuring range: 0°-360° |
| Accuracy: ±2° | |
| Resolution: 1° | |
| Analog Output | Wind Speed: 0-20mA 4-20mA 0-10V 2-573Hz,2-850Hz |
| Wind Direction: 0-20mA 4-20mA 0-10V | |
| Digital Output | Wind Speed: RS485 |
| Wind Direction: RS485 | |
| Baud Rate: 4800/8N1 9600/8N1 19200/8N1 38400/8N1 | |
| Built-in Heating Unit | PTC heater (Auto control) |
| Heating Power: 240W | |
| Operating Voltage | Electronics: 24V DC/AC ±25% |
| Heatings: 24V DC/AC ±25% (230V AC optional) | |
| Working Environment | Temperature: -40ºC~+70ºC |
| Humidity: 0%~100%RH | |
| Adaptability to High Altitude/Low Atmospheric Pressure | 4000m/atmospheric pressure: 60 kPa |
| Wind Resistance | 80m/s |
| Waterproof Protection | IP67 |
| Anti Corrosion Grade | C4 (C5 optional) |
| Electrical Connection | 8 pin Plug Cable |
| Shell Material | Die-casting Aluminum alloy with special coating treatment |
| Installation Hole Size | φ50mm |
| Product Dimension | 175 ×φ150mm |
| Net Weight | 1.2KG |
| Storage Environment | Temperature: - 45 ºC~ + 70 ºC Humidity: 0% ~ 95% RH |
DC4832 Ultrasonic Anemometer is installed on the outer diameter by default φ 50mm meteorological mast or hollow tubular wind measuring support; Other mechanical interface specifications can be configured with adapters to realize the conversion of mechanical interfaces.
Step 1: Connect the cable plug matched with this product to the socket of the product base, and tighten the plug.
Step 2: Use the hex wrench to unscrew 4 M8 socket head cap screws anticlockwise until the product can be smoothly inserted into the weather mast.
Step 3: Rotate the product so that the 0 ° indication mark on the product shell points to the 0 ° wind direction (North Marker Arrow).
Step 4: Use a hex wrench to insert the M8 socket head cap screws, tighten the
four M8 socket head cap screws clockwise, and ensure that the product and the meteorological mast are installed firmly.
Lucyelec Test Equipment Co., Ltd. engaged in oil Analysis and electrical test equipment since 2015, is your reliable partner and professional provider of test and measurement instruments in Baoding China.
Main Products:
1. Oil Test kits (BDV, Tan Delta, Flash Point, Water content, Interfacial Tension, Gas Chromatography, Kinematic Viscosity… etc)
2. Transformer testers /CT PT analyzer (TTR, Winding resistance, Winding deformation, Capacitance and tan delta test, Partial dicharge, etc)
3. SF6 Gas Analyzers (Dew point, Purity, Compensation, etc)
4. Switch/Circuit breaker analyzers (Contact resistance, Mechanical characteristics)
5. MOA/Insulator test devices
6. HV Hipot Testers (AC/DC/VLF)
7. Insulation/Earth resistance test
8. Secondary Injection Relay Test Sets
9. Cable fault location system
10. DC System/Battery Testers
11. Electric safety tools and test equipments
Ultrasonic Anemometer workshop
If you have any inquiry about quotation or cooperation, please contact Lucyelec. Our sales representative will reply you within 24 hours. Thank you for your interest in our products.
