Audited Supplier
Mono-filament Liner Fabric
Tyre Industries
Make to Order
Sponge Compound Mono-Filament
Plain
Fabric Form
Dyed
Woven Fabric
20-300cm Is Available
White
Tyre Industries Use as Liner
Shrink-Resistant
Use as Liner in Tyre
HL GROUP
in Roll
Polyester Mono-filament Liner for tyre industries
China
59119000
Product Description
Tire Liner Fabric
Liner fabric is widely used for the process of rubber calendered. Such as tire, rubber hose , Conveyor belt, rubber sheet and the other rubber products.
It is made of high quality yarn by twisting, parallel and weaving.
We can supply the liner fabric with the Max width of 3600mm, the Max length per roll is 1000m.
Our main products are: PP mono-filament liner fabric , High tenacity PP liner fabric, PVA liner fabric, PP Mesh-filament Liner fabric, High tenacity PP liner fabric, newly- developed liner fabric, Bonded liner fabric etc.
With the advantage of light weight, high tenacity, good abrasion-resistant per formance, smooth surface and low hygoscopic per formence.
With the advantage of high elasticity, good hygoscopic per formence and non-skid property.
Its advantage includes high elasticity, dust-proof, gofferfree and good insulation.
With the advantage of high elasticity, good hygoscopic performence and non-skid property.
with the advantage of light weight, high tenacity, good abrasion-resistant performance, smooth surface and low hygroscopic performance.
Characteristics:
1.No deformation:
The company adopts special imported yarn raw materials. The transverse stiffness of the pad is large. Product wrinkle less, stable size;
The rubber semi-finished product will not be deformed when the gasket is rolled or separated, and the crease is well avoided.
2.Long service life: the internal structure of our products is strengthened so that the product structure is stable and the service life is greatly improved.
3.No stitching: the edges and corners of the fabric will be clean and clean after heat treatment or heat cutting. Less wear and tear at the edge of the pad.
4.Good separation: after the special surface treatment of the pad, the separation is good after a long time, the rubber semi-finished product is intact without deformation when the pad is separated.
5.Good water absorption and drainage: the gasket can control a certain air permeability in the production process. Therefore, in the process of use, not only the water absorption is fast, but also the water discharge is good.
6.Good flexibility: the pad is woven with different fibers to ensure the longitudinal flexibility. Very good roll up and unroll in use, no time to waste
7.Customization: HL GROUP LTD can be customized according to different companies,
According to the uneven thickness of rubber, a double layer is developed
Applications:
Liner fabric is widely used for the process of rubber calendered. Such as tire, rubber hose , Conveyor belt, rubber sheet and the other rubber products.
Specification:
Our main products are: PP mono-filament liner fabric , High tenacity PP liner fabric, PVA liner fabric, PP Mesh-filament Liner fabric, High tenacity PP liner fabric, newly- developed liner fabric, Bonded liner fabric etc.
We also can supply the liner fabric according to customer' requirements.
Pictures:
Why choose us?
1.A professional international sales team, which is specialized in the framework materials for 16 years.
2.Well and high-quality control
3. Strong production capacity and testing capabilities
4.Various designs are available
5.Prompt delivery
6.FREE SAMPLE can be offered
7.The products are sold to all larger tyre manufacturer in China and export to many counties and regions in Europe,
South America, Africa ,Middle east, South and east Asia and so on,and enjoy a good reputation.
What 's the capacity?
The Group has production capacity of Canvas Fabric 30,000 tons/year, Steel Cord 100,000 tons/year, Bead Wire 60,000 tons per year
Tyre Cord Fabrics 40,000 Tons / year, Carbon Black 150,000 tons/year , Tyre Liner Fabric 5 million meters/year ,Film 20,000/year
Shipping Details:
1.International standard export packing in packages or according to t o customer's requirement.
2.Loading port: Qingdao ,Shanghai or according to customer's requirement
3.Delivery Time:
2 -5 days for samples
15-20 days for 1-4 20fcl containers
20-30 days for 3-6 20fcl containers
4.Payment Terms:
Payment: 30% deposit, 70% by T/T against B/L copy or by L/C.
Liner fabric is widely used for the process of rubber calendered. Such as tire, rubber hose , Conveyor belt, rubber sheet and the other rubber products.
It is made of high quality yarn by twisting, parallel and weaving.
We can supply the liner fabric with the Max width of 3600mm, the Max length per roll is 1000m.
Our main products are: PP mono-filament liner fabric , High tenacity PP liner fabric, PVA liner fabric, PP Mesh-filament Liner fabric, High tenacity PP liner fabric, newly- developed liner fabric, Bonded liner fabric etc.
- PP mono-filament liner fabric(230gsm)
- High tenacity PP liner fabric(jacquard )
With the advantage of light weight, high tenacity, good abrasion-resistant per formance, smooth surface and low hygoscopic per formence.
- PVA liner fabric
With the advantage of high elasticity, good hygoscopic per formence and non-skid property.
- PP Mesh-filament Liner fabric
Its advantage includes high elasticity, dust-proof, gofferfree and good insulation.
- PP Mixed cotton liner fabric (270gsm)
With the advantage of high elasticity, good hygoscopic performence and non-skid property.
- High tenacity PP liner fabric
with the advantage of light weight, high tenacity, good abrasion-resistant performance, smooth surface and low hygroscopic performance.
- Bonded liner fabric
Characteristics:
1.No deformation:
The company adopts special imported yarn raw materials. The transverse stiffness of the pad is large. Product wrinkle less, stable size;
The rubber semi-finished product will not be deformed when the gasket is rolled or separated, and the crease is well avoided.
2.Long service life: the internal structure of our products is strengthened so that the product structure is stable and the service life is greatly improved.
3.No stitching: the edges and corners of the fabric will be clean and clean after heat treatment or heat cutting. Less wear and tear at the edge of the pad.
4.Good separation: after the special surface treatment of the pad, the separation is good after a long time, the rubber semi-finished product is intact without deformation when the pad is separated.
5.Good water absorption and drainage: the gasket can control a certain air permeability in the production process. Therefore, in the process of use, not only the water absorption is fast, but also the water discharge is good.
6.Good flexibility: the pad is woven with different fibers to ensure the longitudinal flexibility. Very good roll up and unroll in use, no time to waste
7.Customization: HL GROUP LTD can be customized according to different companies,
According to the uneven thickness of rubber, a double layer is developed
Applications:
Liner fabric is widely used for the process of rubber calendered. Such as tire, rubber hose , Conveyor belt, rubber sheet and the other rubber products.
Specification:
Our main products are: PP mono-filament liner fabric , High tenacity PP liner fabric, PVA liner fabric, PP Mesh-filament Liner fabric, High tenacity PP liner fabric, newly- developed liner fabric, Bonded liner fabric etc.
| Type | PP Mono-filament Liner Fabric | High Tenacity PP Liner fabric | Polyamide Mono-filament Liner Fabric | PP Mixed Cotton Liner Fabric | PET Mixed Cotton Liner Fabric | |||
| No | Item | Unit | Test | Test | Test | Test | Test | |
| 1 | Warp | D | 840 | 840 | 300 | 600 | 21S*4 | |
| Weft | D | Φ40 | 1000 | Φ30 | 10S | 10S*2+21S*2 | ||
| 2 | Width | mm | / | / | / | / | / | |
| 3 | Length | m | L | L | / | / | / | |
| 4 | Density | Warp | end/10cm | 135 | 135 | ≥210 | 200 | 320 |
| Weft | end/10cm | 105 | 105 | ≥130 | 180 | 90 | ||
| 5 | Breaking strength | Warp | N/5cm | 3000 | 3900 | 1900 | 2600 | 5784 |
| Weft | N/5cm | 3300 | 3800 | 1800 | 800 | 800 | ||
| 6 | Elongation | Warp | % | 41 | 40 | ≤35 | ≤5% | 35 |
| Weft | % | 15 | 31 | ≤25 | ≤2% | 13 | ||
| 7 | Tickness | mm | 0.75±0.02 | 0.65±0.02 | 0.75±0.05 | 0.6±0.03 | 0.8±0.05 | |
| 8 | Construction | Plain | Plain | Plain | Plain | Plain | Plain | |
| 9 | Melting point | ºC | 162 above | 162 above | 145-160 | 145-160 | / | |
| 10 | Weight | G/m2 | 330±5 | 300±5 | / | / | 330 above | |
We also can supply the liner fabric according to customer' requirements.
Pictures:
Why choose us?
1.A professional international sales team, which is specialized in the framework materials for 16 years.
2.Well and high-quality control
3. Strong production capacity and testing capabilities
4.Various designs are available
5.Prompt delivery
6.FREE SAMPLE can be offered
7.The products are sold to all larger tyre manufacturer in China and export to many counties and regions in Europe,
South America, Africa ,Middle east, South and east Asia and so on,and enjoy a good reputation.
What 's the capacity?
The Group has production capacity of Canvas Fabric 30,000 tons/year, Steel Cord 100,000 tons/year, Bead Wire 60,000 tons per year
Tyre Cord Fabrics 40,000 Tons / year, Carbon Black 150,000 tons/year , Tyre Liner Fabric 5 million meters/year ,Film 20,000/year
Shipping Details:
1.International standard export packing in packages or according to t o customer's requirement.
2.Loading port: Qingdao ,Shanghai or according to customer's requirement
3.Delivery Time:
2 -5 days for samples
15-20 days for 1-4 20fcl containers
20-30 days for 3-6 20fcl containers
4.Payment Terms:
Payment: 30% deposit, 70% by T/T against B/L copy or by L/C.
