Audited Supplier
This series of machines is suitable for various chemical fber flaments, elastic fibers, composite fibers, and other raw materials to beevenly arranged, sized, dried, and shaped before being wound onto the pulp shaft; it has the advantages of high speed, stable sizingrate, constant tension, and precise contro, makina it an ideal eauipment for shzina chemical iber filaments; it is the preparationequipment for the beaming machine.
*Using hard aluminum oxide rollers.
*Equipped with the yarn sheet compression device to ensure that the yarns remain tensioned during shaft replacement.
*Equipped with tape paper adhesive device.
*Pneumatic up/down shaft and clapper flip/flop system with air pressure sensor to ensure safety.
*Equipped with manual telescopic reed left and right movement and electric reel expansion deviceEquipped with retractable reed swinging device and yarn lifting device.
*Equipped with electrostatic eliminators.
*Adopting a two-stage reverse hot air circulation structure chamber and five drying cylinders.
*Each drying cylinder and chamber is equipped with independent temperature measurement control system.
*Tension sensor control system is adopted to ensure stable tension during operation.
*Equipped with oiling device after drying filament, the speed of oling roller is steplessly adjustable withina certain range.
*Cooling system for dry yarn can be selected as needed. (customer option)
*Using advanced double frequency conversion motor drive system, the tension of the yarn sheet between the sizing roller and the yarn-feeding roller can be adjusted as needed.
*Adopting pneumatic immersion grouting method and specially designed grouting roller, ensuringuniform grouting at both ends and in the middle of the yarn sheet.
*Equipped with a lifting and locking system for the grouting roller and a lifting system for the soakingroller, it makes cleaning and replacing the roller more convenient, and can also protect the rubber rollerduring long-temm shutdown.
*Equipped with double-layer heat preservation slurry drum and slurry heating control circulation device.
*Equipped with automatic slumy spraying device (optional).
*The newly designed slurry supply tank can effectively prevent the slurry from splashing.
*Equipped with reed up/down/left/right movement mechanism, fully extending the service life of the reed.
*6 wet layered rods (condensation rods) are used to protect the slumy film.
*The water chiller (optional) can be provided to achieve better condensation effect.
*Equipped with lifting device of layered reed frame.
*The drying mode of the chamber can be steam drying, natural gas drying, or thermaloil drying.
*A control system is used to automatically adjust the steam / natural gas / thermal oilvolume based on the temperature of the chamber set for hot air circulation, in order tomaintain the temperature of the chamber and achieve uniform drying of the yarns.
*Adopting a hot air circulation heating method opposite to the direction of yarnmovement and an efficient heat exchanger, driven by frequency conversion, greatlyimproves drying efficiency.
| Max speed | 500m/min | ||||||
| Width | 1800mm | 2000mm | 2200mm | 2400mm | 2800mm | 3200mm | |
| Unwinding Part | Power | 7.5kw | 11kw | ||||
| Warp Shaft diameter | ø800mm ø900mm ø1000mm | ||||||
| Number of sizing roots | 2000 2200 2400 2600 3200 3600 | ||||||
| Sizing method | The Compression Mode | ||||||
| Diameter of dipping roller | ø200mm | ||||||
| Sizing roller diameter | ø240mm | ||||||
| Squeeze roller diameter | ø220mm | ||||||
| Pulping method/Max. load | The Grouting Method for Uniform Pressure/Max.1500kg | ||||||
| Drying method | Steam/ Natural gas/ Heat transfer oil | ||||||
| Electric heating power(optional) | 75kw | 110kw | |||||
| Drying room length | 6m+6m | ||||||
| Drying cylinder diameter | ø800mm | ||||||
| Number of drying cylinders | 5 or 7 | ||||||
| Temperature regulating system | Automatic Temperture Control System | ||||||
| After oiling system | The Roller-sticker Oiling (Waxing) Method | ||||||
| Cooling system | Active Cooling System with Airflow Circulation | ||||||
| Winding tension control mode | AC Vector Tension Feedback Control Method | ||||||
| Winding tension control range | 40N~750N | ||||||
| Pulp shaft loading and unloading system | Pneumatic device loading and unloading | ||||||
| Winding shaft diameter | ø800mm~ø1000mm | ||||||
| Display system | Touch-operated Displays | ||||||
| Electrical equippment capacity | 80KVA(155KVA) | 80KVA(190KVA) | |||||
| Steam assembly | 700kg/h | 800kg/h | |||||
| Steam volume | 600kg/h | 700kg/h | |||||
Q: What products does your textile machinery equipment company offer?
A: Our company offers a wide range of textile machinery and equipment, including warping machines, sizing machines,beaming machines, and more.
Q: Can your company provide customized solutions for textile production lines?
A: Yes, we have a team of experienced engineers and technicians who can provide customized solutions for textile production lines to meet the specific needs of our customers.
Q: Do you offer installation and training services for your textile machinery equipment?
A: Yes, we provide installation and training services for all of our textile machinery equipment to ensure that our customers can operate the equipment effectively and efficiently.
Q: What is the warranty for your textile machinery equipment?
A: Our textile machinery equipment comes with a standard warranty, and we also offer extended warranty options for our customers' peace of mind.
Q: Can I get technical support and spare parts for your textile machinery equipment?
A: Yes, we have a dedicated team to provide technical support and offer spare parts for all of our textile machinery equipment to ensure the smooth operation of our customers' production lines.
Q: How can I get a quote for your textile machinery equipment?
A: You can contact our sales team for a quote based on your specific requirements, and we will work with you to provide the best solution at a competitive price.
Q: Does your company have a global presence and can you provide international shipping?
A: Yes, we have a global presence and can provide international shipping for our textile machinery equipment to serve customers around the world.
Q: What is the lead time for delivery of your textile machinery equipment?
A: The lead time for delivery of our textile machinery equipment may vary depending on the specific products and quantities ordered, but we strive to ensure timely delivery to meet our customers' production needs.
Q: How can I learn more about your company and your textile machinery equipment?
A: You can visit our website for more information about our company and our textile machinery equipment, and you can also contact us directly for any inquiries or assistance.
