Audited Supplier
Stainless steel 304/316 flanged flexible rubber expansion joint
FEATURES
- Applicable for suction and delivery (discharge).
- Provides sound and vibration isolation.
- Gaskets and packing are not required.
- Floating flanges allow for easy installation.
- Prevents piping system and equipment breakdown by absorbing elongation and contraction caused by temperature variances.
- Absorbs water pulsation and minimizes water hammering.
OPERATING CONDITIONS
| Size Range | 1-1/2" - 12" | 14" - 24" |
|---|---|---|
| Operating Pressure | up to 214 psi | up to 114 psi |
| Operating Temp. Range* | 14-170 F (Neoprene) 14-210 F (EPDM) | 14-170 F (Neoprene) 14-210 F (EPDM) |
| Burst Pressure | 853 psi | 340 psi |
| Vacuum Rating* | Contact API Sales | Contact API Sales |
* - Warnings:
a. Pressure ratings listed in the above table are for up to 110 Degrees F (for Neoprene), and 125 Degrees F (for EPDM). For elevated temperature service, please contact API Sales for actual working pressure ratings.
b. Limit rods are required in systems that are unanchored and recommended in all other applications.
MATERIALS
| Part | Part Description | Material |
|---|---|---|
| 1 | Flanges | Stainless Steel |
| 2 | Reinforcing Wire | Mild Steel Strands |
| 3 | Tube | Synthetic Rubber |
| 4 | Cover | Synthetic Rubber |
| 5 | Reinforcing Fabric | Synthetic Fiber |
APPLICATIONS
- Pumps & air compressors in air conditioning system & sanitary equipment.
- Refrigeration systems and blowers in industrial plant equipment.
- Feed-water and drainage equipment in marine piping systems.
- Applicable for use in power generation and chemical plants.
- Marine applications
Note: Customized for flanges ANSI-150, ANSI-300 and DIN
Technical parameters
Model Item | JGD-1 | JGD-2 | JGD-3 |
Working pressure Mpa (kgf/cm2) | 1.0(10) | 1.6 (16) | 2.5 (25) |
Explosion pressure Mpa (kgf/cm2) | 2.0 (20) | 3.0 (30) | 4.5 (45) |
Vacuum Kpa (mm/Hg) | 53.3 (400) | 86.7 (650) | 100 (750) |
Applicable Temperature ºC | -15ºC-115ºC(-30ºC-250ºC under special conditions) | ||
Applicable media | Air,compressed air,water,sea water,oil,acid,alkali,and so on | ||
Main data
Nominal Diameter DN | Length Lmm | Flange thickness bmm | Bolts Qty n | Diameter of bolt hole domm | Central diameter of bolt hole D1mm | Axial displacement mm | Horizontal displacement mm | Angular deflection (a1+a2) | ||
mm | Inch | Extension | Compression | |||||||
32 | 1.25 | 95 | 16 | 4 | 18 | 100 | 6 | 9 | 9 | 15 |
40 | 1.5 | 95 | 18 | 4 | 18 | 110 | 6 | 10 | 9 | 15 |
50 | 2 | 105 | 18 | 4 | 18 | 125 | 7 | 10 | 10 | 15 |
65 | 2.5 | 115 | 20 | 4 | 18 | 145 | 7 | 13 | 11 | 15 |
80 | 3 | 135 | 20 | 4 | 18 | 160 | 8 | 15 | 12 | 15 |
100 | 4 | 150 | 22 | 8 | 18 | 180 | 10 | 19 | 13 | 15 |
125 | 5 | 165 | 24 | 8 | 18 | 210 | 12 | 19 | 13 | 15 |
150 | 6 | 180 | 24 | 8 | 23 | 240 | 12 | 20 | 14 | 15 |
200 | 8 | 210 | 24 | 8 | 23 | 295 | 16 | 25 | 22 | 15 |
250 | 10 | 230 | 26 | 12 | 23 | 350 | 16 | 25 | 22 | 15 |
300 | 12 | 245 | 28 | 12 | 23 | 400 | 16 | 25 | 22 | 15 |
350 | 14 | 255 | 28 | 16 | 23 | 460 | 16 | 25 | 22 | 15 |
400 | 16 | 255 | 30 | 16 | 25 | 515 | 16 | 25 | 22 | 15 |
450 | 18 | 255 | 30 | 20 | 25 | 565 | 16 | 25 | 22 | 15 |
500 | 20 | 255 | 32 | 20 | 25 | 620 | 6 | 25 | 22 | 15 |
600 | 24 | 260 | 36 | 20 | 30 | 725 | 6 | 25 | 22 | 15 |
700 | 28 | 260 | 36 | 24 | 30 | 840 | 16 | 25 | 22 | 15 |
800 | 32 | 260 | 38 | 24 | 34 | 950 | 16 | 25 | 22 | 15 |
900 | 36 | 260 | 42 | 28 | 34 | 1050 | 6 | 25 | 22 | 15 |
1000 | 40 | 260 | 44 | 28 | 34 | 1160 | 18 | 26 | 24 | 15 |
1200 | 48 | 260 | 48 | 32 | 41 | 1380 | 18 | 26 | 24 | 15 |
1400 | 56 | 350 | 44 | 36 | 34 | 1560 | 20 | 28 | 26 | 15 |
1600 | 64 | 350 | 46 | 40 | 34 | 1760 | 25 | 35 | 30 | 10 |
- Flange
- Rubber Layer
- Rubber Impregnated Fabric and Tire Cord
- Steel Ring
High quality single sphere flange rubber expansion joint/ rubber flexible dadpter
2. Pressures shows are recommended"operating", test pressure is 1.5time"operating", burst pressure is 3 time"operating".
3. Vacuum rating is based on neutral installed length without external load. Products shall not be installed "elongated"on vacuum applications.
4. Do not weld near the expansion joints or weld the steel flanges to the piping after the expansion joints are installed. This will either burn or seriously damage the expansion joints. Huayuan Product Specifications in this catalogues for reference only. Huayuan reserve the right to change design construction, specification and materials without prior notice and without incuring any obligation. Any precise measurements, kindly contact with Huayuan technical service directly.
Factory Corner
FAQ
Q. Are you a trading company or a manufacturer?
A: We are a manufacturer as you can see our workshop as above.
Q. What is your payment term?
A:Normally T/T 30% in advance, balance to be paid before delivery.
Q: What is your main market?
A:North America,Greenland,South America,Africa,Southeast Assia, Former Soviet Republics ,East Assia,and Europe.
Q: Can I place sample order to your factory?
A: Yes, Samples can be provided.
Q:What kind of trade terms can you do?
A:EX-WORKS,FOB,CFR,CIF,etc.
Q: How long is your delivery time?
A: Generally it is 5-7 days if the goods are in stock. Or it is 15-20 days if the goods are not in stock, it is accordijng to quantity.
