Stainless Steel Belt Dryer for Food Processing and Agricultural Applications

Price $50000.00 Compare
Min Order 1 Piece
Shipping From Jiangsu, China
Popularity 248 people viewed
Quantity
+-
 

Changzhou Weituo Pharmaceutical and Chemical Machinery Co., Ltd.

VIP   Audited Supplier 1 year
Profile Certified by SGS/BV
DWT
Free Spare Parts Exchange
One Year Warranty
Combined
Gas Atomization
Contra-Flow
Transmission
Powder, Solution, Cream, Strap, Bulk
Inactive Gas, Superheated Steam, Effluent Gas, Air
Atmospheric Pressure
Continuous
WEITUO
Wooden Case
1135* 810*1020
Changzhou
8419399090
Product Description
Product Description

Descriptions
Dry equipment of continuous type that DWT series bringing type desiccator produced by batch, dryness for ventilative better slice, strip, particle form supplies. High moisture content as to dehydrated vegetables,traditional Chinese medicine sliced medicinal  herbs, etc, have, but supplies temperature does not allow the high supplies particularly suitable, serial desiccator this have dry and fast, evaporate intensity to be high. products of high quality advantage. Strain the lotion form supplies of the cakes in dehydrating, need to be also very dry after making one to make bar-shapedly.
 
 
Applications

Applications

It is suitable for heating and solidification, drying and dehydration of raw materials in pharmaceutical industry, chemical industry, foodstuff industry, agricultural and sideline products, aquatic products, light industry, heavy industry and so on. The raw materials can be medicine raw materials, Chinese traditional medicine,tablet of drink, immersed electuary, powder, granule, packing bottle, pigment, dyestuff, dehydration vegetable, dried fruit and melons, banger, plastic resin, electric elements, drying varnish and so on.

 

Product Parameters

Principles of work
The dryer for vegetable dehydration consists of feeder, drying bed, heat exchanger,damp exhaust fan, etc.
When operation, air will be entered into dryer and heated through heat exchanger.
Being adapted scientific and reasonable cycle method, the hot air will pass through raw materials to be dried on the bed and carry out uniform heat exchange. Under the action of cycle fan, the hot air stream inside each unit of the dryer will carry out hot air cycle.
Final air with low temperature and high damp will be out. The whole drying process with stable and high effect will be finished.


 Schematic of stracture

 

Technical parameters
ModelsDWT1.6-I
fed table
DWT1.6-II
middle table
DWT1.6-III
discharge tabl
DWT2-I 
fed table
DWT2-II
middle tahk
DWT2-III
discharge table
Belt width (m)1.61.61.6222
Drying section length (m)1010810108
Thickness of the material to be covered(mm)≤100≤100≤100≤100≤100≤100
Temperature(ºC)50-150ºC50-150ºC50-150ºC50-150ºC50-1600ºC50-150ºC
Areae of heat conduction(m²)525398262.5656497327.5
Steam pressure(MPa)0.2-0.80.2-0.80.2-0.80.2-0.80.2-0.80.2-0.8
Drying time(h)0.2-1.20.2-1.20.2-1.20.2-1.20.2-1.20.2-1.2
Power(kw)15.7512.759.5520.7516.7512.55
Overall Dimension (m)12×1.81×1.912×1.81×1.910×1.81×1.912×2.4×1.9212×2.4×1.9210×2.4×1.92
 
Company Profile


 
 
Certifications

Project Cases

Exhibitions

FAQ

Q1: What is the equipment price?
A1: The equipment price is determined according to the product size, product characteristics and product material.

Q2: What is the packaging method?
A2: Naked packaging and wooden box packaging, damage compensation

Q3: What is the temperature range?
A3: The temperature range is 50-270 degrees and can be controlled

Q4: What is the heating method?
A4: There are many heating methods, such as steam, hot air, electric heating, natural gas, etc.

Q5: How long does it take to deliver?
A5: Within 15 days at the earliest

Q6: What does your after-sales service include?
A6: Our afer-sales service includes
(a) Equipment installation and commissioning
After the equipment is completed and the buyer's installation and commissioning notice is received, the supplier will immediately send personnel to install and commission the equipment.
(b) Operator training
Since the equipment is installed and commissioned, the buyer's operators will learn the working principles of the equipment and the maintenance elements during the operation process under the guidance of the supplier's after-sales service personnel, master the theoretical and practical experience of using the equipment, and produce qualified products.
(c) Equipment warranty
The equipment warranty period is one year. The supplier will provide free repairs for any equipment failure caused by manufacturing quality during the warranty period.
(d) Technical service
The supplier will provide free technical consultation for any technical problems encountered during use.
(e) Equipment maintenance after the warranty period
If there is any problem with the equipment after the warranty period, the supplier will provide high-quality maintenance services and original accessories at a unified preferential price.
(f) Service commitment
All door-to-door services will arrive in the most timely manner.
(g) After-sales service spare parts inventory guarantee
The supplier has sufficient spare parts and will send them out within 4 hours according to user needs.

Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA