Audited Supplier
Stainless Steel Grain Screw Auger Conveyor Powder Lifting Elevator
Screw Conveyor product description
The screw conveyor can convey many different materials, like dry powder,such as coffee powder, wheat flour, condiment and it also fits for some small batches. Combining with the packaging machine, we can present you situation tracing with the above material. It can also be used separately. The whole machine are made of stainless steel (also can be made by carbon steel) of 304 except for the motor.
Main performance
Spiral conveyer is continuous conveying equipment using screw rotation to move the material. It used to convey flour, grain, cement, chemical fertilizer, lime-ash, sand, pebble, coal powder etc. Spiral conveyer can't convey easy metamorphous, high stickiness and easy blocking materials
Spiral conveyer can fix up level or dip conveying form. (dip angle: GX<20°,LS<15°) If needing to change the convey orientation, you should make special orders. The working environment temperature usually is -20°~ 80°C
The working environment temperature usually is -20°~ 40°C.The conveying materials temperature usually is -20°~ 200°C
LS series spiral conveyer fits to fix up in level or small dip angle form, the dip angel is suitable not exceeding 20°.
If you have any special requirement, we can make the special design according to the site.
Application
Main technical parameter
| model Model | screw diameter (mm) | Screw pitch (mm) | rotational speed of screw (r/min) | convey measure (m3/h) | motor power (kw) | max dip angle (o ) |
| LS-100 | 100 | 100 | 140 125 112 100 90 80 71 63 50 40 | 2.2 | 2.2~18.5 | ≤20 |
| LS-125 | 125 | 125 | 4.0 | |||
| LS-160 | 160 | 160 | 8 | |||
| LS-200 | 200 | 200 | 11 | |||
| LS-250 | 250 | 250 | 22 | |||
| LS-315 | 315 | 315 | 34 | |||
| LS-400 | 400 | 355 | 64 | |||
| LS-500 | 500 | 400 | 95 | |||
| LS-630 | 630 | 450 | 150 | |||
| LS-800 | 800 | 500 | 210 |
Screw conveyer operation and maintenance
Spiral conveyer conveys powder, granules and small massive material as general application. All kinds' bearings work in dust, so screw conveyor reasonable operation and maintenance is very important in this working case. Screw conveyor operation and maintenance requirements as follows:
1. Spiral conveyor should start with non-loaded. It starts with no material in machine, then adding material.
2. Increase adding material speed gradually up to fixed conveying capacity and evenly adding material when adding material at first. Or else the material easy to blocking and actuating device overload leading to the whole machine damage.
3. In order to guarantee the machine starting with non-loaded requirement, the spiral conveyer should stop adding material before shut down.
4. The conveying material can't mix tough large material avoiding the machine stuck leading to damage.
5. Examine each part the screw conveyer working condition in use, notice the fastening parts loosen or not. If the parts loosen, we should tightening screw to make it fasten.
6. Pay special attention to the spiral tube and screw in connection shaft loosen or not. If it happens, we should stop and correct.
7. The cover can't take down in revolving in case leading to the accident.
8. The machine appears abnormality in revolving; we should examine and eliminate not forcing to revolve.
9. The machine moving parts should add lubricate oil.
Product Show
Our Services
All produts purchased in our company are guaranteed to keep in good repair for one year. If quality problems happen in guarantee period, our company will maintain for free.
a, Before sending the machine, we will test and adjust, so you can use directly when you get it.
b, Operation video & instruction will be sent to clients, to help them use the machines better.
Additionally, our company provides technical support and fittings for life. After-sales service isn't restricted by time and we will solve your problems in time. If you are caught in some problems when using our products, welcome to contact us at any time.
a, Any problems occur while using, professional advice will be offered.
b, All kinds of frequently used parts are supplied all the year round.
c, 24 hours hot line 0086-18236103447(Tel)
Company Information
Xinxiang Sanyuantang Machine Co.,Ltd.ISO9001 certified enterprise.Our company is located in XINXIANG CITY HENAN PROVINCE CHINA,We are one of leading manufacturer who specialize.
At present, the main range of products include kinds of series of Vibrating Screen,Conveyor Equipment,Honey Processing Machine,etc.
We have advanced manufacture equipment, abundant technology power, complete testing measures, strict management system and favorable corporation credit-standing. 
Our products
1.Vibrating screening;
2.Conveyor equipment;
3.Honey processing machine;
4.Related equipments and spare parts.
Q:This is my first time to import,how can I trust your company and ensure to get the goods if I order from you.
A:We are alibaba legitimate certification company (VIP),and we support payment L/C.Escrow.T/T and so on to ensure your safty.
Q:There are too many models,i don't know which one to choose
A: Welcome to consult our online TradeManager,we will recommend according to your
demands.If during closing time or weekend,Please send mail to us,we will response within 24 hours.^_^
Thanks for view us with patience!You are always free to inquiry us and we will response asap.
Contact meWe'll get back to you within 12 HOURS!
