Audited Supplier
125 150 200 300
Standard
Conveyer Equipment
Polishing
Welded Chain
Alloy
Bush Chain
RongDa
Fumigation Free Wooden Box
10*10*10
Chinese Mainland
Product Description
Individual construction/ Toothed chain types
RS=Standard for universal use. Suitable for medium-sized and large products. Air permeability approx. 22%
RT/RD = For small glassware and products prone to tipping. Air permeability approx. 12%. Limited belt cooling·
TT/ET = Suitable for universal use, also for small glassware and products prone to tipping thanks to a level surface. Air permeability approx.31%. Good belt cooling.
TS/ES E For medium-sized to large products Air permeability approx.53%. Excellent belt cooling. Highly suitable for glasses with a solid base or large
Inverted tooth chain layout
These design examples illustrate the wide variety of customization options for inverted tooth conveyor chains to implement highly specific functions.
Design example
Special layout combining high tensile force and an air-permeable surface.
Design example
Special layout for tightly configured chains with a homogenous surface; improved cooling with extended pitches.
Design example
Special layout combining tensile force and an open surface with areas for decreased surface pressure.
Our internationally active expert teams for product development and industry solutions help you reach your goals!
Because requirements change, improvements are always possible, and a technological edge can mean the world, we strive to create even better solutions, day in and day out. Our customers should rest assured that they are receiving the best support and that their inverted tooth chain technology is nothing less than state of the art. We focus on continuous improvements in power transmission, perfecting synchronization, and cutting wear to a bare minimum.
*Industry-specific product innovations
*Components with needs-based add-ons
*Customer-specific overall solutions
Toothed chain belt is also called silent chain belt. Through special heat treatment process, it solves the problem that the heat treatment is not up to standard, which is common in China. The chain piece is forged by special steel strip with heat treatment thickness of 0.2mm. The outer layer is hard and the inner part is soft, which solves the problems of fragmentation and non abrasion, and prolongs the service life (it can be used for 3-5 years under normal conditions).
transport of even the smallest bottles. Consistent chain height allows glassware to be smoothly transferred on and off the conveyor, reducing breakage caused by improper product feeding and tipping. For the ultimate in smooth transport, the chain surface can be ground.
Economy. Because it lasts for years, improves product handling, and requires little or no maintenance, Ramsey chain provides a cost-effective means for conveying glassware in high-speed production lines. The right chain can help reduce breakage and machine downtime
Conveyor chain
CENTER GUIDE GHAIN
Link thickness:1.5mm for standard and La-profile:3mm for 25.4mm
MULTI GUID GHAIN
Conveyor chain
Advantages of RongDa Silent Chain
Silent conveying chains provide a smooth, durable, flat conveying surface that
operates with less vibration and velocity variation than other conveying products. Chains are manufactured from hardened steel components, making them long lasting and tolerant of elevated temperatures. They are available in a variety of standard widths and constructions or can be easily built to suit a specific application.
Linked and pin with a special treatment, so it has highly wearable and strength to pull and can provide more stable use effects and long usage life, all of the silent chain can meet the International standard.
We also can produce it from 304/316 as your special requirement and produce any type of these products as your demand.
The width of silent chain can from 50mm to 500mm.·
Special Recommendation: Two pin sinelt chain can provide better use effects and longer usage life than single pin. And with protection plate can offer more safety protection for the product.
This type silent chain is International standard product it which one, is often used in glass industrial around the world.
This type cilent chain has been ruduced. link height and has more flats on conveyor. It increased surface area on the bottom of chain serves to reduce bearing stress on wear plates. So It well work better where more compact is need.
It" s one type of lightweight and long--lasting chain which also be used on 1/2 " sprocket. Joins fewer links per metter .it s also less susceptible to joint fouling and wear.
RS=Standard for universal use. Suitable for medium-sized and large products. Air permeability approx. 22%
RT/RD = For small glassware and products prone to tipping. Air permeability approx. 12%. Limited belt cooling·
TT/ET = Suitable for universal use, also for small glassware and products prone to tipping thanks to a level surface. Air permeability approx.31%. Good belt cooling.
TS/ES E For medium-sized to large products Air permeability approx.53%. Excellent belt cooling. Highly suitable for glasses with a solid base or large
Inverted tooth chain layout
These design examples illustrate the wide variety of customization options for inverted tooth conveyor chains to implement highly specific functions.
Design example
Special layout combining high tensile force and an air-permeable surface.
Design example
Special layout for tightly configured chains with a homogenous surface; improved cooling with extended pitches.
Design example
Special layout combining tensile force and an open surface with areas for decreased surface pressure.
Our internationally active expert teams for product development and industry solutions help you reach your goals!
Because requirements change, improvements are always possible, and a technological edge can mean the world, we strive to create even better solutions, day in and day out. Our customers should rest assured that they are receiving the best support and that their inverted tooth chain technology is nothing less than state of the art. We focus on continuous improvements in power transmission, perfecting synchronization, and cutting wear to a bare minimum.
*Industry-specific product innovations
*Components with needs-based add-ons
*Customer-specific overall solutions
Toothed chain belt is also called silent chain belt. Through special heat treatment process, it solves the problem that the heat treatment is not up to standard, which is common in China. The chain piece is forged by special steel strip with heat treatment thickness of 0.2mm. The outer layer is hard and the inner part is soft, which solves the problems of fragmentation and non abrasion, and prolongs the service life (it can be used for 3-5 years under normal conditions).
transport of even the smallest bottles. Consistent chain height allows glassware to be smoothly transferred on and off the conveyor, reducing breakage caused by improper product feeding and tipping. For the ultimate in smooth transport, the chain surface can be ground.
Economy. Because it lasts for years, improves product handling, and requires little or no maintenance, Ramsey chain provides a cost-effective means for conveying glassware in high-speed production lines. The right chain can help reduce breakage and machine downtime
Conveyor chain
CENTER GUIDE GHAIN
| ALL LINK &LINK SPACER ASSMBLY | SINGLEPIN | TWO PIN | |||
| ASSEMBLY NUMBER | NOMINAL WIDTH(mm) | WL (MAX)mm | SPROCKET WIDTH(mm) | WH (MAX)mm | WH (MAX)mm |
| CL100 | 100 | 95 | 100 | 100 | 94 |
| CL125 | 125 | 122 | 125 | 126 | 125 |
| CL150 | 150 | 145 | 150 | 151 | 150 |
| CL180 | 180 | 175 | 180 | 182 | 181 |
| CL200 | 200 | 196 | 200 | 203 | 202 |
| CL220 | 220 | 216 | 220 | 202 | 222 |
| CL250 | 250 | 248 | 250 | 254 | 253 |
| CL300 | 300 | 296 | 300 | 305 | 303 |
MULTI GUID GHAIN
| ALL LINK&LINK-SPACER ASSMBLY | SINGLE PIN | TWO PIN | ||||
| ASSEMBLY NUMBER | NOMINAL WIDTH(mm) | WL (MIN)mm | WBG (MIN)mm | WBG (MIN)mm | WH (MAX)mm | WH (MAX)mm |
| ML100 | 100 | 98 | 68.5 | 67 | 103 | 103 |
| ML125 | 125 | 123 | 97 | 95 | 128 | 128 |
| ML150 | 150 | 150 | 97.3 | 96 | 154 | 154 |
| ML200 | 200 | 196 | 145.5 | 144 | 202 | 202 |
| ML250 | 250 | 248 | 196 | 195 | 252 | 253 |
| ML300 | 300 | 299 | 245.5 | 244 | 304 | 303 |
| Chain No. | Pitch | Chain width | Pin diameter | Pin length | Distance Fromhole Centerto | Plate depth | Plate thick- ness | Guide form | Number Of Plates | UItimate tensile strength | Mass Per meter | |
| GB ANSI | P | b min | d2 Max | L max | LC Max | tooth h1 | h2 max | T | n | Fu min | q = | |
| mm | mm | mm | mm | mm | mm | mm | mm | kN | Kg/m | |||
| SC3 | 9.525 | 13.5 | 3.95 | 18.5 | 20.0 | 5.3 | 10.0 | 1.5 | Side | 9 | 10.0 | 0.60 |
| 16.5 | 21.5 | 23.0 | Side | 11 | 12.5 | 0.73 | ||||||
| 19.5 | 24.5 | 26.0 | Side | 13 | 15.0 | 0.85 | ||||||
| 22.5 | 27.5 | 29.0 | Side | 15 | 17.5 | 1.00 | ||||||
| 28.5 | 33.5 | 35.0 | Middle | 19 | 22.5 | 1.26 | ||||||
| SC4 | 12.700 | 19.5 | 5.08 | 24.5 | 26.0 | 7.0 | 13.4 | 1.5 | Side | 13 | 23.4 | 1.15 |
| 22.5 | 27.5 | 29.0 | Side | 15 | 27.4 | 1.33 | ||||||
| 25.5 | 30.5 | 32.0 | Side | 17 | 31.3 | 1.50 | ||||||
| 28.5 | 33.5 | 35.0 | Middle | 19 | 35.2 | 1.68 | ||||||
| 34.5 | 39.5 | 41.0 | Middle | 23 | 43.0 | 2.04 | ||||||
| 40.5 | 45.5 | 47.0 | Middle | 27 | 50.8 | 2.39 | ||||||
| 46.5 | 51.5 | 53.0 | Middle | 31 | 58.6 | 2.74 | ||||||
| 52.5 | 57.5 | 59.0 | Middle | 35 | 66.4 | 3.10 | ||||||
| SC5 | 15.875 | 30.0 | 6.90 | 45.0 | 46.5 | 10.5 | 20.0 | 2.0 | Middle | 19 | 70.0 | 3.37 |
| 38.0 | 53.0 | 54.5 | Middle | 23 | 86.0 | 4.08 | ||||||
| 46.0 | 61.0 | 62.8 | Middle | 27 | 102.0 | 4.78 | ||||||
| 54.0 | 69.0 | 70.8 | Middle | 31 | 117.0 | 5.50 | ||||||
| 62.0 | 77.0 | 78.8 | Middle | 35 | 133.0 | 6.20 | ||||||
| SC6 | 19.050 | 30.0 | 6.90 | 45.0 | 46.5 | 10.5 | 20.0 | 2.0 | Middle | 19 | 70.0 | 3.37 |
| 38.0 | 53.0 | 54.5 | Middle | 23 | 86.0 | 4.08 | ||||||
| 46.0 | 61.0 | 62.8 | Middle | 27 | 102.0 | 4.78 | ||||||
| 54.0 | 69.0 | 70.8 | Middle | 31 | 117.0 | 5.50 | ||||||
| 62.0 | 77.0 | 78.8 | Middle | 35 | 133.0 | 6.20 | ||||||
| SC8 | 25.400 | 45.0 | 8.90 | 52.0 | 53.5 | 14.0 | 26.7 | 3.0 | Middle | 15 | 111.0 | 5.31 |
| 51.0 | 58.0 | 59.5 | Middle | 17 | 125.0 | 6.02 | ||||||
| 57.0 | 64.0 | 65.5 | Middle | 19 | 141.0 | 6.37 | ||||||
| 69.0 | 76.2 | 77.7 | Middle | 23 | 172.0 | 8.15 | ||||||
| 81.0 | 88.2 | 83.7 | Middle | 27 | 203.0 | 9.57 | ||||||
| 93.0 | 100.2 | 101.7 | Middle | 31 | 235.0 | 10.98 | ||||||
| SC10 | 31.750 | 57.0 | 10.84 | 66.6 | 69.6 | 17.5 | 33.4 | 3.0 | Middle | 19 | 165.0 | 8.42 |
| 69.0 | 78.6 | 81.6 | Middle | 23 | 201.0 | 10.19 | ||||||
| 81.0 | 90.6 | 93.6 | Middle | 27 | 237.0 | 11.96 | ||||||
| 93.0 | 102.6 | 105.6 | Middle | 31 | 273.0 | 13.73 | ||||||
| 105.0 | 114.6 | 117.6 | Middle | 35 | 310.0 | 15.50 | ||||||
| 117.0 | 126.6 | 129.6 | Middle | 39 | 346.0 | 17.27 | ||||||
Conveyor chain
Advantages of RongDa Silent Chain
Silent conveying chains provide a smooth, durable, flat conveying surface that
operates with less vibration and velocity variation than other conveying products. Chains are manufactured from hardened steel components, making them long lasting and tolerant of elevated temperatures. They are available in a variety of standard widths and constructions or can be easily built to suit a specific application.
Linked and pin with a special treatment, so it has highly wearable and strength to pull and can provide more stable use effects and long usage life, all of the silent chain can meet the International standard.
We also can produce it from 304/316 as your special requirement and produce any type of these products as your demand.
The width of silent chain can from 50mm to 500mm.·
Special Recommendation: Two pin sinelt chain can provide better use effects and longer usage life than single pin. And with protection plate can offer more safety protection for the product.
This type silent chain is International standard product it which one, is often used in glass industrial around the world.
This type cilent chain has been ruduced. link height and has more flats on conveyor. It increased surface area on the bottom of chain serves to reduce bearing stress on wear plates. So It well work better where more compact is need.
It" s one type of lightweight and long--lasting chain which also be used on 1/2 " sprocket. Joins fewer links per metter .it s also less susceptible to joint fouling and wear.
