Audited Supplier
Expanded metal mesh is also called pulled plate wire mesh. A rigid piece of metal that has been slit and drawn into an open mesh pattern in a single operation. It is stronger, lighter in weight and more rigid than the original base metal.
Expanded metal mesh refers to after the special metal sheet metal (sheet metal punching machine) processing, the formation of the network status of the material sheet.Steel mesh is a variety of metal screen industry. Also known as metal plate mesh, diamond mesh, iron net, expanded metal net, heavy steel plate net, pedal net, punching plate, aluminum, stainless steel net, net, filter net, granary antenna network, audio network etc.
Standard expanded metal is a type of metal stock that features diamond-shaped patterns that are produced by simultaneously slitting and stretching the material.
Flattened expanded metal is made by passing raised expaned metal through a cold rolled reducing mill, leaving a flat and smooth surface.
Material | Stainless Steel, Low Carbon Aluminum,Low caron steel, Galvanized steel,Stainless steel,Copper, Titanium etc |
LWD | MAX 300mm |
SWD | MAX 120mm |
Stem | 0.5mm-8m |
Sheet width | MAX 3.4m |
Thickness | 0.5mm - 14mm |
Surface Treatment | - Without treatment is ok - Anodized (colour can be customized) - Powder coated - PVDF - Spray painted - Galvanized : Electric galvanized, Hot-dipped galvanized |
Classification | - Small expanded wire mesh - Medium expanded wire mesh - Heavy expanded wire mesh - Diamond expanded wire mesh - Hexagonal expanded wire mesh - Special expanded |
Use | Expended metal mesh can be widely used in including theprotection of machinery equipment, handicraft manufacturing, shelves, heavy machinery,work platforms, walkways,ships as well as other areas. |
SWD (Short Way of the Diamond) is the distance from the middle of the bond on one side to the middle of the bond on the opposite side.
LWD (Long Way of the Diamond) is the distance across the largest dimension of the diamond measured halfway between the diamonds.
SWO (Short Way of the Opening) is the width of the opening of the shortest side of the diamond. SWO does not include the strand width, where SWD (Short Way of the Diamond) does.
LWO (Long Way of the Opening) is the length of the opening of the longest side of the diamond. LWO does not include the strand width, where LWD (Long Way of the Diamond) does.
