Support Grid Ss 304 Material Rectangular Mesh Pad Demister

Support Grid AISI 304 Material Rectangular Mesh Pad Demister

Support Grid AISI 304 Material Rectangular Mesh Pad Demister

1. AISI 304 Material Rectangular Mesh Pad Demister inquiry:

 Welcome your inquiry related with any type of demisters. We have experienced technicians and devoted workers here . We are happy to try to understand your requirement, design and fulfill the details and make the satisfied mesh pad demisters for you.

Meanwhile, we have good knowledge of world popular demister types and specifications. We can make brand new and the same demisters with what you are using in your devices. Sure, a relatively lower cost for replacement than before can be expected.

In this case, we took a piece of simple rectangular mesh pad demister for example. Its main specification is in the following chart.

2. AISI 304 Material Rectangular Mesh Pad Demister Specification:

3. When AISI 304 Material Rectangular Mesh Pad Demister should be replaced?

Due to the fact that the mesh pad demister is normally installed in a major process line, it is almost impossible to replace them while the lines are in operation. Therefore, for economy purpose, it is important to have them replaced during annual or periodic shut-down period. For these reasons, the followings are presented for the user's consideration.

• When the thickness has changed.
• When the corrosion of the wire is severely noticed.
• When the tightness of each pad sections has changed.
• When the entrained mist or dust gives pressure drop hazard.
• Others as having been experienced by maintenance engineers.

4. AISI 304 Material Rectangular Mesh Pad Demister Material:

Mesh and grids may be made from most metals and plastics i.e. SS304, 304L, 316, 316L, 321, 310S, 201, Duplex 2205, 316Ti, 904L, Monel, Nickel, Alloy 20, Copper, P.T.F.E., H.D.P.E., P.P., co-knit of 316L + PTFE, alloy 20 + PTFE, 304+PTFE, 904L + PTFE, 304+glass fiber, 316L + glass fiber, 904L + glass fiber, 316L+PP etc. and other metals, alloys or plastic which can be drawn or extruded.

5. Advantages in AISI 304 Material Rectangular Mesh Pad Demister:

• Optimized solutions
• Standard configurations
• Tailored made configurations
• Expedited services available
• knowledge and engineering experience
• High quality manufacturing standards and procedures
• Manufactured in a variety of corrosion resistant materials (Metals, Plastics and Co-knit mesh options)

6. More cases of AISI 304 Material Rectangular Mesh Pad Demister:

Free design and drawing service welcome to contact

Warmly welcome your contact for demisters and related products!