Audited Supplier
JYC-210
250X150X200, 300X200X200, 400X300X200
0.5 micron
automacit
Sinpo
Veneer Case
CNC model
Guizhou, China
9031809090
Product Description
JYC-210 Surface Profile Meter
Surface profile meter can measure the line features on the surface of various types of workpiece, point features, distance between point and point, distance between line and line, as well as true position of various features, including distance, parallelism, verticality, angle, groove depth, groove width, and radius. Meanwhile, it can carry out straightness analysis, convexity analysis, profile analysis and so on.
:
Application Field and Technical Parameters:
,,,,,,,.,,,.:
It is widely used in machining, automobile, motorbike, precision hardware, precision tools, tools, moulds, optical elements and other industries, which are applicable to institutes of scientific research, colleges and universities, metrology organizations, and the enterprise metrology rooms and workshops. For example:
:,,,,,;
Industry of automobile parts: It not only can measure the generatrix's parameters of the piston, piston pin, gear and valve lifter for car, motorcycle and compressor, but also can measure the parameters of various oblique parts.
:(,R,,);,,,;,,;
Bearing industry: It can measure the shape of sealing groove for inner and outer rings (e.g., angle, chamfer R, groove depth, groove width, and etc.), the generatrix's straightness, convexity, angle and logarithmic curve of the roller and ring for various roller bearings, as well as the raceway's straightness of needle bearing, cylindrical roller bearing, linear bearing.
:,,.
Motor industry: It can measure the straightness of motor shaft, various groove's parameters of motor shell and motor rotor, etc.
:
Product Characteristics:
,.
Uses high-rigidity alloy guide rail, without any need of air source.
,,.
Adopts the current international mainstream software's engineering mode, which can give a definition to the items to be measured, so as to make the measurement more fast and convenient.
USB,350k/S.
For both data acquisition system and motion control system, adopt USB and Ethernet transmission plans, with the acquisition rate up to 350k/S.
,.
Real-time display of the actual position information for various axes, so that the users can view/see the exact location of the instrument in real time.
:
Technical Parameters:
Surface profile meter can measure the line features on the surface of various types of workpiece, point features, distance between point and point, distance between line and line, as well as true position of various features, including distance, parallelism, verticality, angle, groove depth, groove width, and radius. Meanwhile, it can carry out straightness analysis, convexity analysis, profile analysis and so on.
:
Application Field and Technical Parameters:
,,,,,,,.,,,.:
It is widely used in machining, automobile, motorbike, precision hardware, precision tools, tools, moulds, optical elements and other industries, which are applicable to institutes of scientific research, colleges and universities, metrology organizations, and the enterprise metrology rooms and workshops. For example:
:,,,,,;
Industry of automobile parts: It not only can measure the generatrix's parameters of the piston, piston pin, gear and valve lifter for car, motorcycle and compressor, but also can measure the parameters of various oblique parts.
:(,R,,);,,,;,,;
Bearing industry: It can measure the shape of sealing groove for inner and outer rings (e.g., angle, chamfer R, groove depth, groove width, and etc.), the generatrix's straightness, convexity, angle and logarithmic curve of the roller and ring for various roller bearings, as well as the raceway's straightness of needle bearing, cylindrical roller bearing, linear bearing.
:,,.
Motor industry: It can measure the straightness of motor shaft, various groove's parameters of motor shell and motor rotor, etc.
:
Product Characteristics:
,.
Uses high-rigidity alloy guide rail, without any need of air source.
,,.
Adopts the current international mainstream software's engineering mode, which can give a definition to the items to be measured, so as to make the measurement more fast and convenient.
USB,350k/S.
For both data acquisition system and motion control system, adopt USB and Ethernet transmission plans, with the acquisition rate up to 350k/S.
,.
Real-time display of the actual position information for various axes, so that the users can view/see the exact location of the instrument in real time.
:
Technical Parameters:
| X1() X1 axis (beam) | ||
Measuring range | 100mm | |
Straightness | 0.7um/60mm 0.7μm/60mm | |
Moving speed | 0 ~4mm/s () 0 ~ 4mm/s (at any speed) | |
Resolution | 0.5 | |
Indicating accuracy | ±(2.5+2L/100) L(mm) ± (2.5+2L/100) , where L: Drive length (mm) | |
Measuring direction | Backwards | |
Detecting method | Grating ruler | |
| Z1() Z1 shaft (sensor) | ||
Measuring range | 12mm | |
Resolution | 0.03 | |
Detecting method | Precision inductive transducer | |
Indicating accuracy | ±(1.5+|4H|/50) ± (1.5+|4H|/50) | |
| / Upward/Downward movement of measuring needle | Arc motion | |
Direction of measuring needle | Downwards | |
Lifting mode of measuring needle | Manual | |
Measuring force | 6mN | |
Radius of measuring needle | 25 25 hard alloy | |
Ascending angle | 75 85 Upward: 75° Downward: 85° | |
Measuring speed | 0.02 mm/s~4 mm/s() 0.02 mm/s~4 mm/s (at any speed) | |
| Z2() Z2 axis (column) | ||
Height of column | 200mm | |
Maximum measuring height | 100mm | |
Movingt mode | CNC CNCor handle | |
Moving speed | 0.1~8/mm() 0.1~8/mm (at any speed) | |
Collection and control system | ||
System transmission mode | PCI | |
System resolution | 16AD 16-bit AD | |
Control mode of movement | CNC CNCdrive or handle drive | |
Data processing | ||
Graphic scaling | , Adjust the size by the mouse pulley | |
Auxiliary line | Add some auxiliary lines anywhere in the graph | |
Data fitting | , When the work-piece cannot be measured completely for one time, it can be divided into several times for measurement, and then combine these results | |
Elimination of abnormal points | Manual elimination or automatic elimination of abnormal convex and concave points | |
Graphic movement | Drag the graph arbitrarily within the coordinates by using mouse | |
Graphic rotation | Rotation of arbitrary angle | |
Local zoom | Select a zone/area to zoom in or zoom out the graph | |
| SPC SPC quality analysis | , Bar chart, normal distribution diagram | |
Mode of document output | PDF,Excel,CAD PDF, Excel, CAD | |
Edit of measurement report | , Can output standard reports, which can be edited by the users according to their needs | |
Operating parameters | ||
Power supply | 400W,AC220V 50HZ 400W, AC220V, 50HZ | |
Environment | :10~30ºC;:<85% Temperature: 10 ~ 30 ºC; Relative humidity: < 85% | |
