Audited Supplier
150cm Repair Corrosion Protection Tape
Plastic
Welding
Without Treatment
OEM
Individual Foil Bag
China
7019909000
Product Description
SynthoGlass Water activated Composite Repair Leak Repair Corrosion Protection Tape
It is a roll of fibreglass bandage impregnated with water-activated resin. You simply immerse the bandage in water for 4 seconds,then apply by wrapping around the damaged pipe area. A successful pipe wrap can be achieved in 30 minutes. It is a good solution moisture cured wrap system for Pipeline Mechanical Protection for corrosion.
PU resin fiberglass cast for pipe leaks and reinforcement | PU resin fiberglass cast is used in : |
√ Withstand temperature up to 120-150°C √ Repairs leak in 30 minutes √ Withstand pressure up to 3.1Mpa/31bar/450psi √ Compressive strength: 27182psi √ Hardness : 70 Shore D √ Ideal for pipe reinforcement & corrosion protection | Power Generation, Building &Facilities Management, Water distribution,Wastewater, Manufacturing plants, Industrial processing, Electronics,Pharmaceutical, Pulp & Paper, Agricultural,Food processing) |
Ansen Pipe Repair Bandage is used for : | Ansen Pipe Repair Bandage applies to : |
(Offline pipe repairs, Active leaks, Sealing joints, Hazardous material spill control,Reinforce thinning walls,Corrosion control & protection) * Abrasion protection * Structural reinforcement * Repairs in hard to reach areas * Underwater repairs * Electrical conduit or cable repairs | Black Iron, Stainless Steel, PVC, CPVC, Fiberglass,Polyethylene,Polypropylene) * Pressure up to 450 PSI * Temperature up to 150°C * Pipe diameter up to 60″ (1524 mm) * Liquid or Gas pipeline * Permanent repair or extend service life of pipes |
Specification
Name | Model | Size | Packing |
polyurethane resin wrap bandage tape | PR002 | 50mm × 3.6m (2''×12'') | 10 rolls ×10 rolls/ctn |
polyurethane resin wrap bandage tape | PR003 | 75mm × 3.6m (3''×12'') | 10 rolls ×10 rolls/ctn |
polyurethane resin wrap bandage tape | PR004 | 100mm × 3.6m (4''×12'') | 10 rolls ×10 rolls/ctn |
polyurethane resin wrap bandage tape | PR005 | 125mm × 3.6m (5''×12'') | 10 rolls ×10 rolls/ctn |
polyurethane resin wrap bandage tape | PR006 | 150mm × 3.6m (6''×12'') | 10 rolls ×10 rolls/ctn |
1/2/3/4/5/6inch width, 3m/5m/6m/9m/10m/15m length, we can do. | |||
Application:(two levels for saving costs)
How to use itCompany Profile
How to contact
Level 1 Level 1 is for normal Industrial, such as water pipe repaired, sewer pipe repaired, etc. | Level 2 Level 2 is for high requirement of Industrial usage, such as oilfield, gas pipeline etc. |
 |  |
1.Shut off the pressure and isolate leak. Clean, degrease and abrade substrate around leak site.
2.Put on gloves supplied with the Pipe Repair Bandage. Immerse Bandage in water or place under running tap water for 4 secs.4.Wrap the Bandage tautly around the wrap site extending 50mm either side of damaged area.
5.Smooth the resin as it foams during curing and work resin into the base fabric in a 'tightening motion'. Restore pipe to service once Bandage is cured.
How to contact