Audited Supplier
CO2 welding automatic trolleys are widely used in ships, bridges, locomotives, steel structures, petrochemicals and other industries. They are suitable for welding a variety of welding structures, such as: welding of stiffened plates, ribs, intersections, welding of box beams, etc. wait. Its main advantages are:
- Reduce labor intensity and improve the working environment.
- Improve work efficiency, which is 1.5 times that of manual welding.
- Avoid poor weld quality caused by human factors. Generally, the defective rate of manual operation is about 20%. , and the use of automatic welding trolleys has no welding defect rate, so its comprehensive benefits are nearly 200% higher than manual welding.
- High degree of automation, ensuring the stability of welding quality.
- No need for very skilled technical workers.
Features
(1) KA-H5-G is an automatic device for side absorption angle welding.
(2) Install a permanent powerful magnet to prevent the car from falling off during welding. The permanent powerful magnet can also prevent the car damaged accident caused by the carrier caused by the loss of electromagnets during power outages.
(3) It is suitable for corner welding of work steel, T -shaped parts or 7 types. It is small, light in size, is easy to walk without orbit. In addition, it can be moved on the tilt surface and narrow space.
(4) The drive wheel itself is designed to towards the welding site. The bottom of the car is equipped with a friction limit wheel to better ensure that the car is walking along the welding line. The side suction type installation method is suitable for some special welding forms.
Applicable environment
(1) Suitable for horizontal fillet welding
(2) Box-shaped I-beam and H-shaped steel parts outer wall welding
(3) Suitable for I-LIB, T-BAR welding
1. The body part: X-Y block, sensor, handle and other attachments composed
2.Drive part: The device of the driver's car part is composed of rubber wheels, oblique gear, chain, sprocket wheels, spindle, etc.
3.Welding torch 1 adjust the slider: adjust the welding tool 1 position device. In the welding, you can also use the handle, lower, left, and the right to fine -tune
4. Welding torch 2 adjust the slider: adjust the location of the welding gun 2
5. Welding torch fixing rack: The device of fixed welding gun is used in order to check and adjust the design and production of the convenient welding gun.
6.Guide wheel part: walk along the welding workpiece, accurately guide the welding site
7.Control box: Control all the movements of the car, refer to the control panel operation method for details
1. Walking start switch: The switch is turned on and the car starts to walk2.Walking stop switch: If the car is walking, if the stop switch is pressed and switch, all the action will be stopped
3. Walking direction select switch: choose to walk to the left or right
4.Walking speed: adjust the car to walk speed knob, increase clockwise
5.NO.1 Welding/non -welding: NO.1 Welding/non -welding selection switch of welded torch, press the switch when placed in a non -welding position, only walking and not welding in the car
6. NO.2 welding/non -welding: NO.2 Welding/non -welding selection switch of welding guns, press the switch when placed in a non -welding position, only walking and not welding in the car
| Projects | Content | remark | ||
Buggy | Power supply | 110~220V | AC | |
| Size | 340 * 460 * 290 | L×W×H | ||
| Weight | 14Kg | |||
| Drive | Four-wheel drive | Rubber wheels | ||
| Walking speed | 0 to 960 mm /min | Denoted by scale | ||
Welding gun adjustment range | Up and down | 40mm | ||
| Front and rear | 40mm | |||
| Job Angle adjustment range | Plus or minus 45 | |||
| Make the Angle adjustment range | 360. | |||
| Control box | Operating function | Power light | ||
| Start of walk | ||||
| Walking stops | ||||
| Walking direction selection | Left or right | |||
| Travel speed regulation | Increase clockwise | |||
| No.1 Welding/non-welding options | ||||
| No.2 Welding/non-welding options | ||||
1.Q:Are you a factory or trading company?
A, Yes we are the trading company,but we have a lot of factories that have cooperative relationships, and we can get the best plan and price for you.
2.Q:Does the machine have CE certificate?
A:Yes, others certifications also can be sent
3.Q:What's the shipping method?
A: International express and sea transportation,Depend on customer.
4.Q:Can I use my own forwarder to transport the products for me?
A:Yes, if you have your own forwarder in China, you can let your forwarder ship the products for you.
5.Q:What's the Payment method?
A:T/T,L/C and other payment method, Depend on customer.
6.Q: What is our payment term?
A:We can accept the payment by T/T and Trade assueance .
7.Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine.
8.Q: How can I know your machine works well?
A: Before delivery, we shall test the machine working condition for you.And we warmly welcome you to China for inspection.
9.Q:How to Place an order?
A:Please kinldy send us your order by email,we will confirm the PI with you .we wish to know the below:your details address,phone/fax number,destination,transportation way ;Product informaiton:item number,size,quantity,logo,etc.
